海洋环境立体监测系统的设计方法

“九五”和“十五”期间,在国家海洋863计划的支持下,我国分别在上海和台湾海峡及毗邻海域建立了两个区域性海洋环境立体监测示范系统。在这两个示范系统的技术研究成果的基础上,通过分析国际海洋立体监测系统的设计模型,提出了区域性海洋环境立体监测系统的设计原则和设计方法,包括:系统结构、数据与信息服务通信网络、数据处理中心、数据流程以及系统功能等方面的设计方法。     

日本凋毛藻碳酸酐酶基因及其编码的蛋白特征

碳酸酐酶CA(EC 4.2.1.1)是含锌原子的金属蛋白酶,该酶的基本功能是催化CO₂与HCO₃-间的相互转换[1].该反应在许多生物过程中都发挥着重要的作用,例如离子交换、呼吸作用、pH稳定性、捕获CO₂和光合作用等[2~5].CA广泛分布于各种生物中,已知的CA酶根据氨基酸序列被分为-αCA,-βCA和γ-CA三种类型[5~7].这3种类型的CA酶序列间的相似性很低,被认为是由不同的途径进化而来的[7].α-型的CA酶在动物、植物、绿藻、细菌和蓝细菌中都有发现[7],在藻类中报道的α-型CA还很少.迄今为止只在衣藻中发现2种异构体,在盐藻中发现3种[8,9],在红藻中还未见报道.     

Sensitivity evaluation of the flash flood warning system introduced to ungauged small mountainous basins in Korea

This study evaluates the uncertainty involved in the determination of the flash flood guidance(FFG) of the flash flood warning system(FFWS) for a small mountainous region(FFWS_MR)in Korea. The sensitivity is evaluated both at each step to determine the FFG and for all steps together. The results show that the relative difference of the FFG is about 50% of the current system, most of which involves the channel width. Especially, the use of some specific empirical equations to estimate the major parameters results in a considerable amount of the relative difference of the FFG. In addition, though only four basins were field-surveyed, it is found that the indirect estimation of the major parameters always introduces some amount of additional uncertainty. In conclusion, accurate estimation of the major parameters must be the most important procedure to derive an accurate FFG, among which the channel cross-section at the exit of the basin lies at the center.     

Multivariate analysis of fluorescence and source identification of dissolved organic matter in Jiaozhou Bay, China

Hierarchical clustering analysis and principal component analysis (PCA) methods were used to assess the similarities and dissimilarities of the entire Excitation-emission matrix spectroscopy (EEMs) data sets of samples collected from Jiaozhou Bay, China. The results demonstrate that multivariate analysis facilitates the complex data treatment and spectral sorting processes, and also enhances the probability to reveal otherwise hidden information concerning the chemical characteristics of the dissolved organic matter (DOM). The distribution of different water samples as revealed by multivariate results has been used to track the movement of DOM material in the study area, and the interpretation is supported by the results obtained from the numerical simulation model of substance tracing technique, which show that the substance discharged by Haibo River can be distributed in Jiaozhou Bay.     

TRANSIENT EM ANALOGUE MODELLING FOR KOREAN TREASURE HUNTING WITH THE SIROTEM SYSTEM1

The inductive transient electromagnetic method (TEM) shows good potential for the detection of metallic relics of historical interest, such as buried antique bells, Buddhist idols, or precious metal nuggets. The effectiveness of the method was investigated with analogue models, using transmitter-receiver loop configurations with sizes or receiver spacings slightly different from those usually applied in earth resources exploration with the Sirotem system. The analogue modelling results show that the location and depth of the buried treasure may be obtained from the Sirotem data. A solid metallic object such as an antique bell could be detected to a depth about 12 times greater than its size, and treasure consisting of separate metallic objects, such as gold nuggets, could be detected to a depth 5 times its linear dimensions with a transmitter current of ? 20 A. In scaling down the dimensions of a target, its conductivity should be increased in order to preserve the same TEM conditions found in the field. However, since the buried treasure consists of gold or copper objects, it is not possible to properly scale the conductivity. Hence, in the field, the depth detection limit is expected to be greater than that derived from analogue modelling.     

Ripple formation in combined transdirectional steady and oscillatory flow

Measurements are described of the geometry of ripples formed on beds of sand exposed to a steady current at right angles to an oscillatory flow. Four different sands were studied. The oscillation was produced by an oscillating tray set into the bed of a steady-flow flume. It was observed that straight-crested ripples formed by oscillatory flow would usually develop a ‘serpentine’ form when the superimposed steady current exceeded a certain limit. For amplitudes of the tray velocity U_∞ less than about 0.38 m s^-1 this limit corresponded to U_∞/ū_*c>31, where ū_*c is the shear velocity measured just upstream of the oscillating tray. It is suggested that the serpentine form is caused by the interaction of vortices carried back and forth between adjacent ripples. On this assumption, the wavelength of the serpentine form would be proportional to the product of period of oscillation and near-bed steady current velocity. The present measurements appear to support this hypothesis although there is also evidence that the wavelength is influenced by preferred spacing patterns between vortices. The measurements also show the ratio of the amplitude of the serpentine form to its wavelength to be approximately constant. Empirical relationships are derived relating ripple geometry to flow and sediment properties. It is observed that the influence of Reynolds number and sediment properties on the geometry is very weak. It is suggested that this is typical of ripples formed with relatively low sediment transport rates. It is also found that, under the present experimental conditions, the ripple spacing in the direction of oscillation is almost independent of the magnitude of the steady current and in close agreement with the wavelengths previously measured in an oscillating water tunnel. This suggests that the additional inertia effects associated with oscillating tray rigs were not sufficient to affect bed geometry under the present test conditions.     

INTERPRETATION OF VLF-EM IN-PHASE DATA USING CURRENT DENSITY PSEUDOSECTIONS1

The interpretation of VLF-EM surveys in terms of buried conductors can be assisted by the application of a linear filter to the observed in-phase component of the vertical magnetic field. One such scheme is examined critically by using the calculated response from a variety of synthetic models to compute theoretical current density pseudosections. The results confirm that this filter technique provides a useful complementary tool for studying the third (i.e. depth) dimension. For single, steeply dipping plates (> 45°) diagnostic information may be derived concerning the depth, size, lateral location, and direction of dip, since the current density maxima seems always to occur within the conductor or at least within one data interval. However, there are some limitations which do not appear to be widely recognized. For single plates the angle of dip cannot be resolved by the current density transformation. Pattern distortions can occur where targets are in close proximity, where the cross-sectional form of the conductor is complex or where the dip is shallow (< 45°). In these latter cases the current density maxima may not occur within the conductive structure and therefore cannot be used to infer depth of burial and/or conductor shape with the same degree of confidence.     

THE EFFECT OF A SUPERPARAMAGNETIC LAYER ON THE TRANSIENT ELECTROMAGNETIC RESPONSE OF A GROUND*

A thin superparamagnetic layer on the earth's surface greatly affects the transient electromagnetic response of a conducting ground. The effect of the layer is most evident for singleloop transient electromagnetic data where transient voltages decay as 1/t. Even when a separate transmitter and receiver are used, the effect of the superparamagnetic layer is still pronounced. In this case the effect of the 1/t term in the equation is much less. More dominant now is a 1/t² term. The effect of the superparamagnetism can readily be seen in the analytical expressions for the apparent resistivities. If the presence of the superparamagnetic layer is not recognized, then the apparent resistivities decrease with time rather than approach the true value of the host rock.     

Large-scale glacial thrusting and related processes in North Dakota

Large-scale thrusting by the glacial ice occurred in many parts of the Interior Plains of North Dakota, Alberta, and Saskatchewan in late Wisconsinan time. Thrust features are especially prominent in parts of North Dakota. Many of the topographic features of the glaciated landscape of North Dakota formed, either entirely or in part, by the thrusting mechanism, and many individual ice-thrust features have been recognized. The ice-thrusting process was also related to fluting by the glacier, and, as a result, drumlins and other types of fluted features are commonly closely associated with ice-thrust topography. Thrusting by the glacier was dependent primarily on groundwater conditions beneath the ice; thrusting occurred only where hydrologic conditions were appropriate. Most of the individual ice-thrust features that have been recognized are located over discrete aquifers, and the sizes and shapes of the thrust features are dependent upon the sizes and shapes of the aquifers.     

A new location of Holocene dolomite formation, Lake Hayward, Western Australia

Holocene dolomite forms in the sediment of Lake Hayward, a small permanent hypersaline lake in the Clifton-Preston Lakeland System, Western Australia. The geomorphological setting of dolomite formation in Lake Hayward is similar to the Coorong region in South Australia. Unlike in the Coorong region, dolomite in Lake Hayward does not form as a direct precipitate from the lake water, but is of diagenetic origin. This can be deduced from the following features: (1) the dolomite occurs only below 60–70 cm from the sediment-water interface, (2) dolomite occurs as luminescing cement, and (3) dolomite has pristine well-formed rhomb-shaped crystals. The source of magnesium for dolomitization is probably from the concentration on inflowing groundwater by evaporation and the selective removal of calcium by chemical and biological aragonite/calcite precipitation.