Forward induced seismic hazard assessment: application to a synthetic seismicity catalogue from hydraulic stimulation modelling

The M _w 3.2-induced seismic event in 2006 due to fluid injection at the Basel geothermal site in Switzerland was the starting point for an ongoing discussion in Europe on the potential risk of hydraulic stimulation in general. In particular, further development of mitigation strategies of induced seismic events of economic concern became a hot topic in geosciences and geoengineering. Here, we present a workflow to assess the hazard of induced seismicity in terms of occurrence rate of induced seismic events. The workflow is called Forward Induced Seismic Hazard Assessment (FISHA) as it combines the results of forward hydromechanical-numerical models with methods of time-dependent probabilistic seismic hazard assessment. To exemplify FISHA, we use simulations of four different fluid injection types with various injection parameters, i.e. injection rate, duration and style of injection. The hydromechanical-numerical model applied in this study represents a geothermal reservoir with preexisting fractures where a routine of viscous fluid flow in porous media is implemented from which flow and pressure driven failures of rock matrix and preexisting fractures are simulated, and corresponding seismic moment magnitudes are computed. The resulting synthetic catalogues of induced seismicity, including event location, occurrence time and magnitude, are used to calibrate the magnitude completeness M _c and the parameters a and b of the frequency-magnitude relation. These are used to estimate the time-dependent occurrence rate of induced seismic events for each fluid injection scenario. In contrast to other mitigation strategies that rely on real-time data or already obtained catalogues, we can perform various synthetic experiments with the same initial conditions. Thus, the advantage of FISHA is that it can quantify hazard from numerical experiments and recommend a priori a stimulation type that lowers the occurrence rate of induced seismic events. The FISHA workflow is rather general and not limited to the hydromechanical-numerical model used in this study and can therefore be applied to other fluid injection models.     

Stability Study of a Tide Embankment Subjected to Sea Level Variations Using Centrifugal Model Tests

To investigate the behavior of dredged-sea-sand fill compacted inside tide embankments with a damaged geosynthetic mat, centrifugal model tests and numerical simulation were conducted, both considering variations in sea level. The results from the three centrifugal model tests demonstrate that the subsidence of the dredged-sea-sand fill inside tide embankments with a damaged geosynthetic mat was strongly affected by the loss of dredged-sea-sand into the filter layers with large particles and a decrease in the bearing capacity of the filter layers with small particles. In addition, a comparison of the test and simulation results confirms that the loss of sand into the filter layer and the subsidence of the dredged-sea-sand fill were well reproduced by the numerical simulation.     

Inclined lidar observations of boundary layer aerosol particles above the Kongsfjord,Svalbard

An inclined lidar with vertical resolution of 0.4 m was used for detailed boundary layer studies and to link observations at Zeppelin Mountain (474 m) and Ny-Ålesund, Svalbard. We report on the observation of aerosol layers directly above the Kongsfjord. On 29 April 2007, a layer of enhanced backscatter was observed in the lowest 25 m above the open water surface. The low depolarization ratio indicated spherical particles. In the afternoon, this layer disappeared. The ultrafine particle concentration at Zeppelin and Corbel station (close to the Kongsfjord) was low. On 1 May 2007, a drying process in the boundary layer was observed. In the morning, the atmosphere up to Zeppelin Mountain showed enhanced values of the backscatter coefficient. Around noon, the top of the highly reflecting boundary layer decreased from 350 to 250 m. The top of the boundary layer observed by lidar was confirmed by radiosonde data.     

Estimation of the minimum food requirement using the respiration rate of medusa of Aurelia aurita in Sihwa Lake

We examined the respiration rate of Aurelia aurita medusae at 20 °C and 28 °C to evaluate minimum metabolic demands of medusae population in Sihwa Lake, Korea during summer. While weight specific respiration rates of medusae were constant and irrespective to the wet weight (8?C220 g), they significantly varied in respect to temperatures (p<0.001, 0.11±0.03 mg C g^?1 of medusa d^?1 at 20°C and 0.28±0.11 mg C g^?1 of medusa d^?1 at 28 °C in average, where Q ₁₀ value was 2.62). The respiration rate of medusae was defined as a function of temperature (T, °C) and body weight (W, g) according to the equation, R=0.13×2.62^(T-20)/10 W ^0.93. Population minimum food requirement (PMFR) was estimated from the respiration rate as 15.06 and 4.86 mg C m^?3 d^?1 in June and July, respectively. During this period, increase in bell diameter and wet weight was not significant (p=1 in the both), suggesting that the estimated PMFR closely represented the actual food consumption in the field. From July to August, medusae grew significantly at 0.052 d-1, thus the amount of food ingested by medusae population in situ was likely to exceed the PMFR (1.27 mg C m^?3 d^?1) during the period. In conclusion, the medusae population of higher density during June and July had limited amount of food, while those of lower in July and August ingested enough food for growth.     

Reconstruction of historical nutrient levels in Korean and Japanese coastal areas based on dinoflagellate cyst assemblages

Dinoflagellate cysts acquired from sediment cores were analyzed in order to reconstruct historical nutrient levels in Gamak Bay, Korea and Ariake Bay, Japan. Dinoflagellate cyst assemblages in Gamak Bay were characterized by high proportions of heterotrophic cysts such as Brigantedinium spp., Protoperidinium americanum and Polykrikos cysts, which suggested that nutrients levels may have already been high before 1970s, and then increased further to the hypertrophic conditions of the 1990s. In contrast, dinoflagellate cyst assemblages in Ariake Bay were characterized by high relative abundances of Lingulodinium machaerophorum and Spiniferites spp., which suggested that nutrient levels in Ariake Bay had increased gradually since the mid 1960s, and may have been significantly enhanced by the mid 1980s. Dinoflagellate cyst assemblages reflecting environmental changes in the two bays are contrasting, perhaps due to different nutrient enrichment mechanisms. This suggests that the indicators of nutrient levels encoded in dinoflagellate cyst assemblages may exhibit site-specific information.     

Electrokinetic Removal of Petroleum Hydrocarbon from Residual Clayey Soil Following a Washing Process

This study investigates total petroleum hydrocarbon (TPH) removal from residual clayey soil, after a washing procedure, using an electrokinetic process. Eight electrokinetic experiments were carried out to investigate the characteristics of TPH removal. When 0.1 M MgSO₄ or 0.1 M NaOH was used as an electrolyte, the electric current rapidly increased within the first 100 or 200 h, respectively. A negatively charged soil surface resulted in a more negative zeta potential and greater electroosmotic flow toward the cathode. Therefore, the accumulated electroosmotic flow (EOF) when using 0.1 M NaOH as the anolyte‐purging solution was higher than when using 0.1 M MgSO₄. Although the energy consumption for the two purging solutions was similar, the efficiencies of TPH removal when 0.1 M MgSO₄ and 0.1 M NaOH with surfactant were used were 0 and 39%, respectively, because the electroosmotic flow rate increased with TPH removal efficiency. When 5% isopropyl alcohol (IPA) was used as a circulation solution, the electric current increased but the TPH removal was similar to that using water. In terms of energy consumption, the use of a surfactant‐enhanced electrokinetic process with NaOH as electrolyte was effective in removing TPHs from low‐permeability soil.     

Conservation of Korean Rural Heritage through the Use of Ecomuseums

Rural heritage that involves agricultural heritage could be critical to enhancing community identity through a conservational approach. The purpose of this research is to develop conservational methods for rural heritage that include agricultural heritage areas through the use of ecomuseums. To conduct the research, we first reviewed the concepts of ecomuseum and rural heritage. Secondly, we defined the concept of the Korean rural ecomuseum by taking into consideration the concept defined by Riviere, Globally Important Agricultural Heritage Systems (GIAHS), the rural heritage policy of Europe, and the agricultural heritage systems of Korea. Thirdly, we also describe methods that are applicable to Korean rural ecomuseums, which include type classification and components. Finally, we applied the ecomuseum concept to two pilot models in the Cheongsando and Gurae areas, both Korea Important Agricultural Heritage System (KIAHS) sites. We conclude that it is desirable to expand the range of targets for conservation from agricultural heritage to rural heritage areas. From this point of view, the rural ecomuseum can be a highly valuable tool that can help preserve agricultural heritage sites and neighboring areas. Furthermore, the ecomuseum can enhance community identities, and strengthen local economies.     

Ecological significance of alkaline phosphatase activity and phosphatase-hydrolyzed phosphorus in the northern part of Gamak Bay, Korea

We investigated the ecological significance of alkaline phsophatase (APase) and alkaline phosphatase-hydrolyzable phosphorus (APHP) in the northern part of Gamak Bay, Korea. APase activity was detectable throughout the year, and dissolved inorganic phosphorus (DIP) concentration and APase activity are highly correlated and can be regarded as an indicator of DIP-limiting conditions. Also, a strong linear positive correlation between APase activity and Chl a concentration indicated that the major part of APase activity may have been induced by phytoplanktons. The APHP proportion in dissolved organic phosphorus (DOP) was above ca. 30% from winter to spring and below ca. 15% from summer to autumn due to freshwater discharge and uptake by phytoplankton. APHP may play an important role in species competition in coastal area such as northern part of Gamak Bay where DIP is limiting. Thus, APase induction by phytoplanktons may be ecologically significant, allowing dominance by these organisms under DIP-limiting conditions.     

Numerical modeling and experiments of coarsening foam

Numerical and experimental results of drying and wetting foam are presented. Foam can be wetted by wash water delivered on its top boundary, or drained by allowing the liquid to move downward in response to gravity. These processes are governed by nonlinear equations that in special cases accept exact solutions. Here we develop a numerical model that satisfies realistic boundary conditions. Numerical results are presented in conjunction with experiments conducted with coarsening foam. In addition, calculations were carried out modeling the wetting and draining of coarsened foam. From the simulations and experiments, coarsening bubbles were found responsible for accelerating drainage, or vice versa.     

Modeling and control of a 75 kW class variable liquid-column oscillator for highly efficient wave energy converter

The modeling and control of a variable liquid-column oscillator having a liquid filled U-tube with air chambers at its vertical columns are presented. As an ocean wave energy extracting device, the structure of the variable liquid-column oscillator (VLCO) is analogous to that of the tuned liquid-column damper used to suppress oscillatory motion in large structures like tall buildings and cargo ships. However, owing to an air spring effect caused by the dynamic pressure of air chambers, the amplitude of response of the VLCO becomes significantly amplified for a desired wave period. The governing equations for the motion of VLCO structure under wave excitation and the motion of liquid with an air spring effect caused by an air–liquid interaction are described by a series of nonlinear differential equations. A set of control parameters for extracting maximum power from various wave conditions is determined for the efficient operation of the VLCO. It is found that the effect of the air spring has an important role to play in making the oscillation of the VLCO match with the ocean wave. In this way, the VLCO provides the most effective mode for extracting energy from the ocean wave.