Geotechnical design parameter evaluation using the alluvial plain characteristics in southeastern Iraq

Geotechnical construction is responsible for the overall stability of superstructures, and if there are design errors, the structure will be exposed to potential problems. Geotechnical design starts with the correct interpretation of the target ground. Southeastern Iraq is mainly comprised of an alluvial plain with diverse geological features, and, therefore, geotechnical design requires a detailed interpretation and understanding of the area. This paper reports on laboratory and field tests and in-depth analyses conducted on these alluvial plains. The results reveal that the upper layer of this area is highly over-consolidated. This may have been caused by the removal of overburden pressure as a result of glaciation and desiccation. The highly over-consolidated soils caused considerable sample disturbance by swelling the bored sample; this provided less reliable results. However, the cone penetration test was regarded as the most appropriate field assessment method for deriving sensible geotechnical design parameters. Despite its limitations in clayey soils, the standard penetration test provided results that matched well with previous observations due to the high penetration resistance of the highly over-consolidated ground. Down-hole tests and plate load tests were considered less reliable methods due to their limited applicability in this area. This study considers geographical features, laboratory methods, and empirical correlations from in situ tests, and, therefore, provides a well-summarized guideline to evaluate special geotechnical characteristics of the alluvial plain in southeastern Iraq.     

Changes in Fish Assemblages after Dike Construction in the Saemangeum Area

In the Saemangeum area, construction of a dike began in 1991 and was completed in 2006; desalination is currently being conducted. In order to investigate     

Acoustic Characteristic of Sailfin Sandfish (Arctoscopus japonicus) in Dokdo,Republic of Korea

The aim of this study is to determine the acoustic characteristics of sailfin sandfish over a wide frequency range. The acoustic survey was conducted in Fe     

Numerical simulation of nearshore circulation on field topography under random wave environment

In order to investigate surf zone hydrodynamics through two-dimensional numerical simulations of nearshore circulation under random wave environment, a nearshore circulation model, SHORECIRC, and a random wave model, SWAN, were combined and utilized. Using this combined model, a numerical simulation of the October 2, 1997 SandyDuck field experiment was performed. For this simulation, field topography and an input offshore spectrum were constructed using observed data sets synchronized with the experiment. The wave-breaking model in SWAN was modified by using breaker parameters varied according to bottom slope. The simulation results were compared with the experimental data, which revealed a well-developed longshore current, as well as with results using other combinations which were SHORECIRC and its original monochromatic wave-driver, and SHORECIRC and the default of SWAN. The results from the novel combined model agreed well with the experimental data. The results of the present simulation also indicate that alongshore field topography influences shear fluctuation of longshore currents.     

Characterization of Frequency and Aggregation of the Antarctic Krill (<Emphasis Type="Italic">Euphausia superba</Emphasis>) Using Acoustics

In this study, the dB difference and characteristics of krill swarms inhabiting Subarea 48.1, which includes the west and south of the South Shetland Island and the Elephant Island peripheries, were estimated to distinguish Antarctic krill, using acoustics. From April 13 to 24, 2016, acoustic data were collected along 24 survey lines using the frequencies 38 and 120 kHz, and middle trawling was performed at 7 stations. Using the difference between the dB values of two volume backscattering strength (Sv) frequencies (38 and 120 kHz), a clear acoustic distinction could be made between Antarctic krill (4.9 to 12.0 dB) and fish (?4.0 to ?0.2 dB). The distributions and mean Sv of krill swarms in the Elephant Island peripheries and south of South Shetland Island were higher than those in the west of South Shetland Island. The mean length/ height ratio of krill swarms in the west of the South Shetland Island (64.5) was higher than that in the south (35.9) and the Elephant Island peripheries (33.8), with the length of the aggregations exceeding their height. Most krill swarms were distributed between the surface layer (less than 10 m below sea level) and within 200 m of water depth. These results are expected to serve as baseline data for evaluating krill density and biomass by distinguishing them from fish, using acoustics.     

Reconstruction of regular time series from bi-monthly temperature data in the Yellow Sea and the northwestern East China Sea

Reconstruction of evenly-spaced, regular time series from routine survey serial data was investigated for precise analysis of spatio-temporal variations in a temperate sea at mid-latitudes where the seasonality dominates the interannual variability. Considering that the annual range of sea surface temperature in the Yellow Sea and the northwestern East China Sea can be as large as 15–20 °C, temperature data collected bi-monthly in these temperate seas were used for the assessment of reconstruction methodology. The cubic spline interpolation with a sampling interval of 0.5 months reconstructed the regular time series closest to the in-situ measurements among various interpolation schemes. Also, two computation methods for the interannual anomaly were compared; the residual method that the long-term monthly means are subtracted from the monthly serial data and the filtering method that high-frequency variations are removed using a low-pass filter. In that the high-frequency variations in frequencies greater than 1 cycle per year are comparable in magnitude to the interannual variation, the residual method proves inadequate in the temperate sea. High-frequency noises can be effectively removed through the use of a proper low-pass filter with bell-shaped weights.     

Effect of wave amplitude on turbulent flow in a wavy channel by direct numerical simulation

The present study numerically investigates the characteristics of three-dimensional turbulent flow in a wavy channel. For the purpose of a careful observation of the effect of the wave amplitude on the turbulent flow, numerical simulations are performed at a various range of the wave amplitude to wavelength ratio (0.01?α/λ?0.05), where the wavelength is fixed with the same value of the mean channel height (H). The immersed boundary method is used to handle the wavy surface in a rectangular grid system, using the finite volume method. The Reynolds number (Re=U_bH/ν) based on the bulk velocity (U_b) is fixed at 6760. The present computational results for a wavy surface are well compared with those of references. When α/λ=0.02, the small recirculating flow occurs near the trough at the instant, but the mean reverse flow is not observed. In the mean flow field, the reverse flow appears from α/λ=0.03 among the wave amplitude considered in this study. The domain of the mean reverse flow defined by the locations of separation and reattachment depends strongly on the wave amplitude. The pressure drag coefficient augments with increasing the wave amplitude. The friction drag coefficient shows the increase and decrease behavior according to the wave amplitude. The quantitative information about the flow variables such as the distribution of pressure and shear stress on the wavy surface is highlighted.     

Composition of the phytoplankton pigments in the surface waters along a transect from the Northwestern to the southeastern Pacific Ocean

Multidisciplinary oceanic investigation was undertaken in Aug–Sep. 2003 along a transect from Northwestern (Busan, Korea) to Southeastern Pacific (Talcahuano, Chile) to understand the physical, chemical and biological features in the surface water, and to depict their interaction with the atmosphere. Among the twenty parameters measured, we describe the physical, chemical and biological features. Physico-chemical data were analyzed in conjunction with the geographic position and yielded 7 peculiar surface water masses. The first water mass (28.4°N, 130.8°E to 21.5°N, 139.5°E) was warm and low in phosphate and nitrate content, and high in silicate. The concentration of phytoplankton pigment was one of the lowest. The second (20.4°N, 140.7°E to 2.2°S, 162.9°E) was the warmest and the least saline. Nitrate and phosphate concentration were one of the lowest. Chlorophyll a (Chl a) concentration was the lowest among the surface waters. The third (3.4°S, 164.0°E to 14.5°S, 173.3°E) was warm. Nitrate concentration was the lowest. CHL-a, peridinin (Perid), violaxanthin (Viola), zeaxanthin (Zea), chlorophyll-b (Chl b) and β-CAR were abundant. The fourth (18.6°S, 177.5°E to 31.8°S, 123.9°W) was saline and poor in nutrient concentration. The contributions of 19′-butanoyloxyfucoxanthin (But-fuco), 19′-hexanoyloxyfucoxanthin (Hex-fuco), and CHL b to CHL a were non-negligible. The fifth (32.4°S, 122.1°W to 33.8°S, 117.2°W) was relatively cold and well oxygenated. Concentration of Fuco, But-fuco, Hex-fuco and Chl b was high. The sixth (34.2°S, 115.4°W to 37.4°S, 92.1°W) was cold, well oxygenated and enriched with phosphate and nitrate. Concentration of phytoplankton pigment was, however, one of the lowest. The seventh, located off the Chilean coast, from 37.2°S, 87.2°W to 36.1°S, 74.1°W was well oxygenated and highly enriched with nitrate and phosphate. Phytoplankton pigments such as Fuco, Perid, But-fico, and Hex-fuco were rich. The 7 surface water masses are partially attributed to Kuroshio Current, North Equatorial Current and North Equatorial Countercurrent, South Equatorial current, South Pacific Subtropical Gyre, South Pacific Current, Subtropical Front and Chilean coastal water. The differences in physicochemical characteristics and the history of the surface water resulted in difference in quantity and composition of the phytoplankton pigment.     

Molecular expression of opsin gene in growing juvenile mackerel (<Emphasis Type="Italic">Scomber japonicus</Emphasis> Houttuyn)

Fish have developed color vision that is closely adapted to their photic environments, where both spectral sensitivity and the number of visual opsins are influenced. The mackerel used in this study is one of the most important fishery stocks in Korea. The opsin gene of the mackerel juveniles after 20 days in hatching was isolated and characterized based on the molecular study of visual photoreceptor. The full-length mackerel opsin gene was obtained by PCR amplification of genomic DNA, as well as cDNA synthesis. Sequence analysis of the opsin gene showed that it contained a 1,080 bp open reading frame encoding 360 amino acids. Based on Schiff’s base formation (S114, K119), glycosylation (E3, F37) and palmitoylation (S281, 282), the deduced amino acid sequence had a typical rod opsin. The mackerel and Gempylus serpens showed 73.7% DNA homology on opsin gene, which was higher than any other of investigated species. In the analysis of phylogenetic relationship, the genetic placement of the mackerel is closer to that of Scombroidei than Labroidei, with supporting somewhat strong bootstrap value. In the analysis of Northern and RT-PCR, the probed products were observed only in rapidly growing juveniles. These findings indicate that in mackerel opsin mRNA expression can be detected in day-20 hatching larvae. It may play an important role in stimulating growth hormone.