Solar forcing on antarctic terrestrial climate: A study by means of GPS observations

With a view to difficulties with explaining the physical mechanism of solar forcing on the Earth’s climate, we applied a new approach of determining and quantifying an influence of solar-related events on water vapor variability by correlating the total electron content (TEC) and precipitable water vapor (PWV), both derived from ground-based GPS observations. In this study, ionospheric TEC and atmospheric PWV values are employed as solar activity and terrestrial climate parameters, respectively. Three-year GPS data at five stations in Antarctica are analyzed on a daily mean basis. Results show significant correlation between TEC and PWV differences during storms-affected days. The high correlation between the daily mean values of TEC and PWV, both of which follow the seasonal signals and subsisting downward trend, suggests an influence of solar activity on climate variability in Antarctica. These quantities are determined by changes of the upper-atmosphere level, which varies in conformity with the zenith angle of the Sun.     

Effects of particle size of mono-disperse granular flows impacting a rigid barrier

Understanding the interaction between complex geophysical flows and barriers remains a critical challenge for protecting infrastructure in mountainous regions. The scientific challenge lies in understanding how grain stresses in complex geophysical flows become manifested in the dynamic response of a rigid barrier. A series of physical flume tests were conducted to investigate the influence of varying the particle diameter of mono-dispersed flows on the impact kinematics of a model rigid barrier. Particle sizes of 3, 10, 23 and 38 mm were investigated. Physical tests results were then used to calibrate a discrete element model for carrying out numerical back-analyses. Results reveal that aside from considering bulk characteristics of the flow, such as the average velocity and bulk density, the impact load strongly depends on the particle size. The particle size influences the degree of grain inertial stresses which become manifested as sharp impulses in the dynamic response of a rigid barrier. Impact models that only consider a single impulse using the equation of elastic collision warrant caution as a cluster of coarse grains induce numerous impulses that can exceed current design recommendations by several orders of magnitude. Although these impulses are transient, they may induce local strucutral damage. Furthermore, the equation of elastic collision should be adopted when the normalized particle size with the flow depth, δ/h, is larger than 0.9 for Froude numbers less than 3.5.     

Evolution of thrust system deformation in an intracratonic chain: Study of the Southern-Central Tunisian Atlas

The development of belt structures in intracratonic chains is guided by the convergence system. In the Southern-Central Tunisian Atlas, several parameters control the evolution of thrust folds during different tectonic phases. One of these phases is tectonic inheritance, which leads to the reactivation of pre-existing normal faults during compressive phases. The angle between the direction of these faults and the shortening axis (NNW-SSE) is the most important parameter for interpreting the mode of the evolution of thrust folds. Jebel Elkebar is an example of a structure developed on NW-SE-oriented faults that is perpendicular to the shortening axis. Based on the geometry of its folds, Jebel Elkebar is interpreted as a 'Fault Related Fold'. The E-W-oriented Orbata structure is oblique to the direction of the shortening axis and is interpreted through the model 'Fault Propagation Fold' with 'Breakthrough'. The Gafsa Fault, which is parallel to the shortening axis, is a transpressional fault interpreted through the 'Strain Partitioning' mode, which is associated with the oblique ramp fold. The development of various thrust folds requires the presence of a basal decollement level during the Triassic succession. In the Southern-Central Tunisian Atlas, the deformation is variable (geometry of fold closure) and is correlated with the depth of the decollement level; indeed, the intensity of deformation is proportional to the depth of the decollement level. Consequently, the most important deformation is in the higher successions and is a vertical migration of the decollement level associated with thin-skinned deformation.     

HEAVY METAL POLLUTION IN SURFACE SEDIMENTS COLLECTED FROM DRAINAGES RECEIVING DIFFERENT ANTHROPOGENIC SOURCES FROM PENINSULAR MALAYSIA

Surface drainage sediments were collected, between January and April in 2005, from 6 sampling sites in Peninsular Malaysia suspected to have received different anthropogenic sources. These drainages included sites near a petrochemical plant, an electronic factory, a metal factory and 2 townships in addition to a relatively unpolluted site (a reference site). Based on the aqua-regia method, the metal concentrations for all the sampling sites except for the agricultural site (reference site) at Sg. Benut were between 60.92-1 019 μg/g dry weight for copper (Cu), 65.32-1 266.6μg/g dry weight for plumbum (Pb), 1.46-15.93 μg/g dry weight for cadmium (Cd), 330.10-484.14 μg/g dry weight for zinc (Zn) and 47.03-120.90 μg/g dry weight for nickel (Ni). All of these ranges were significantly (p< 0.05) higher than those (Cu: 8.77 μg/g; Pb: 57.42 μg/g; Cd: 0.96 μg/g; Zn: 68.21 μg/g; and Ni: 17.87 μg/g) of the reference site at Sg. Benut that only received agricultural disposal. The concentrations for the 5 metals from all the sites (except for the reference site) were higher than the Sediment Quality Values for Hong Kong by Chapman et al (1999) for the 5 metals. Based on the sequential extraction technique, 3 geochemical fractions [easily, freely leachable and exchangeable (EFLE), acid-reducible and oxidisable-organic] were also useful in identifying these polluted sites. The elevated metal concentrations found in the sediments might be related to point sources of industrial effluent and urban waste. Hence, the results emphasized the necessity for the treatment of effluents into this drainage area. As part of the effort to control illegal discharges and dumping into drainages, public awareness should be enhanced.     

Microbial community of cyanobacteria mats in the intertidal zone of oil-polluted coast of Saudi Arabia

Cyanobacterial mats are found at various locations along the coast of the Eastern Province of Saudi Arabia. Those mats were affected by severe oil pollution following 1991 oil spill. In this study, samples from Abu Ali Island were collected at three selected sampling sites across the intertidal zone (Lower, Middle, and Upper) in order to understand the effect of extreme environmental conditions of high salinity, temperature and desiccation on distribution of cyanobacteria along the oil polluted intertidal zone. Our investigation of composition of cyanobacteria and diatoms was carried out using light microscopy, and Denaturant Gradient Gel Electrophoresis (DGGE) technique. Light microscopy identification revealed dominant cyanobacteria to be affiliated with genera Phormidium, Microcoleus, and Schizothrix, and to a lesser extent with Oscillatoria, Halothece, and various diatom species. The analysis of DGGE of PCR-amplified 16S rRNA fragments showed that the diversity of cyanobacteria decreases as we proceed from the lower to the upper intertidal zone. Accordingly, the tidal regime, salinity, elevated ambient air temperature, and desiccation periods have a great influence on the distribution of cyanobacterial community in the oil polluted intertidal zone of Abu Ali Island.     

Hydrochemistry of a complex volcano-sedimentary aquifer using major ions and environmental isotopes data: Dalha basalts aquifer, southwest of Republic of Djibouti

In the Republic of Djibouti (Horn of Africa), fractured volcanic aquifers are the main water resources. The country undergoes an arid climate. Alluvial aquifers exist in the wadis (intermittent streams) valleys and, in relation with volcanic aquifers, form complex volcano-sedimentary systems. Due to increasing water demands, groundwater resources are overexploited and require a rigorous management. This paper is focused on the Dalha basalts aquifer, located in the Dikhil area (Southwest of Djibouti). This aquifer is of vital importance for this area. Hydrochemical data and isotopic tracers (¹⁸O and ²H) were used to identify factors and phenomena governing the groundwater’s mineralization. The Piper diagram shows complex water types. Results from multivariate statistical analyses highlight three water families according to their locations: (1) groundwater characterized by low ionic concentrations located at the wadis zones; (2) groundwater characterized by moderate salinity and (3) highly mineralized waters mainly flowing in the eastern and central part of the study area, in volcanic aquifers. Results from scatter plots, especially Na versus Cl and Br versus Cl, suggest that the origin of more saline waters is not from dissolution of halite. The δ¹⁸O and δ²H data indicate that the groundwater flowing in the alluvial aquifer is of meteoric origin and fast percolation of rainwater occurs in the volcanic aquifers. These findings provide a preliminary understanding of the overall functioning of this complex volcano-sedimentary system. Additional investigations (pumping tests, numerical modeling) are in progress to achieve a more comprehensive understanding of this system.     

Specimens size effect D/H on cyclic behaviour and liquefaction potential of clean sand

Acta Geotechnica - Owing to the lack of complementary shear stress on vertical boundaries of a direct simple shear (DSS) specimen, the stress/strain distributions in soil specimens are not uniform....     

Spatial and temporal variabilities of hypoxia in the Rappahannock River,Virginia

Hypoxia/anoxia in bottom waters of the Rappahannock River, a tributary estuary of Chesapeake Bay, was observed to persist throughout the summer in the deep basin near the river mouth; periodic reoxygenation of bottom water occurred on the shallower sill at the river mouth. The reoxygenation events were closely related to spring tide mixing. The dissolved oxygen (DO) in surface waters was always near or at the saturation level, while that of bottom waters exhibited a characteristic spatial pattern. The bottom DO decreased upriver from river mouth, reaching a minimum upriver of the deepest point of the river and increasing as the water becaume shallower further upriver. A model was formulated to describe the longitudinal distribution of DO in bottom waters. The model is based on Lagrangian concept—following a water parcel as it travels upriver along the estuarine bottom. The model successfully describes the characteristic distribution of DO and also explains the shifting of the minimum DO location in response to spring-neap cycling. A diagnostic study with the model provided insight into relationships between the bottom DO and the competing factors that contribute to the DO budget of bottom waters. The study reveals that both oxygen demand, either benthic or water column demand, and vertical mixing have a promounced effect on the severity of hypoxia in bottom waters of an estary. However, it is the vertical mixing which controls the longitudinal location of the minimum DO. The strength of gravitational circulation is also shown to affect the occurrence of hypoxia. An estuary with stronger circulation tends to have less chance for hypoxia to occur. The initial DO deficit of bottom water entering an estuary has a strong effect on DO concentration near the river mouth, but its effect diminishes in the upriver direction.     

The effects of kinetic sorting on sediment mobility on steep slopes

In poorly mobile static armour, sorting is usually considered the result of hiding/exposure effects. We called this effect ‘static sorting’ in opposition to very efficient grain‐to‐grain mechanisms produced by a mobile mixture, called ‘kinetic sorting’. We hypothesized that kinetic sorting can be an important contributor to the morphodynamics of mountain streams and attempted to demonstrate this with new flume experiments. Two long runs were produced with natural poorly sorted sediments, and with transport stages of the coarse fraction (defined by the ratio between the shear stress and the critical shear stress for transport), smaller and higher than 1, respectively. Both runs produced an efficient transfer downstream of the injected material, but with a major difference: the first run (no kinetic sorting) produced permanent armour figuring clusters, akin to what has already been observed in similar experiments; the second run (with kinetic sorting) also produced bed armouring, but this armour was periodically totally destroyed, leading to substantial bed erosion. This phenomenon was explained by kinetic sorting, the effects of which are to produce an efficient downward migration of fine materials and bed surface armouring. The consequence is that fine materials are hidden to the flow during aggradation, allowing the slope to attain values much steeper than would have been expected at equilibrium for the mixture. However, whereas the surface armouring tends to stabilize the bed, construction of a layer of fine sediments at the subsurface also contributes to making it very unstable. These two contradictory effects explain the complex bed behaviours and the existence of very large bedload and slope fluctuations. Copyright © 2014 John Wiley & Sons, Ltd.     

Risk assessment of soil erosion in semi-arid mountainous watershed in Saudi Arabia by RUSLE model coupled with remote sensing and GIS

Soil erosion is the most important factor in land degradation and influences desertification in semi-arid areas. A comprehensive methodology that integrates revised universal soil loss equation (RUSLE) model and GIS was adopted to determine the soil erosion risk (SER) in semi-arid Aseer region, Saudi Arabia. Geoenvironmental factors viz. rainfall (R), soil erodibility (K), slope (LS), cover management and practice factors were computed to determine their effects on average annual soil loss. The high potential soil erosion, resulting from high denuded slope, devoid of vegetation cover and high intensity rainfall, is located towards the north western part of the study area. The analysis is investigated that the SER over the vegetation cover including dense vegetation, sparse vegetation and bushes increases with the higher altitude and higher slope angle. The erosion maps generated with RUSLE integrated with GIS can serve as effective inputs in deriving strategies for land planning/management in the environmentally sensitive mountainous areas.