A multi-proxy record of the Last Glacial Maximum and last 14,500?years of paleoenvironmental change at Lone Spruce Pond, southwestern Alaska

Sediment cores from Lone Spruce Pond (60.007°N, 159.143°W), southwestern Alaska, record paleoenvironmental changes during the global Last Glacial Maximum (LGM), and during the last 14,500 calendar years BP (14.5?cal?ka). We analyzed the abundance of organic matter, biogenic silica, carbon, and nitrogen, and the isotope ratios of C and N, magnetic susceptibility, and grain-size distribution of bulk sediment, abundance of alder shrub (Alnus) pollen, and midge (Chironomidae and Chaoboridae) assemblages in a 4.7-m-long sediment sequence from the depocenter at 22?m water depth. The basal unit contains macrofossils dating to 25?C21?cal?ka (the global LGM), and is interpreted as glacial-lacustrine sediment. The open water requires that the outlet of the Ahklun Mountain ice cap had retreated to within 6?km of the range crest. In addition to cladocerans and diatoms, the glacial-lacustrine mud contains chironomids consistent with deep, oligotrophic conditions; several taxa associated with relatively warm conditions are present, suggestive of relative warmth during the global LGM. The glacial-lacustrine unit is separated from the overlying non-glacial lake sediment by a possible disconformity, which might record a readvance of glacier ice. Non-glacial sediment began accumulating around 14.5?cal?ka, with high flux of mineral matter and fluctuating physical and biological properties through the global deglacial period, including a reversal in biogenic-silica (BSi) content during the Younger Dryas (YD). During the global deglacial interval, the ??¹³C values of lake sediment were higher relative to other periods, consistent with low C:N ratios (8), and suggesting a dominant atmospheric CO₂ source of C for phytoplankton. Concentrations of aquatic faunal remains (chironomids and Cladocera) were low throughout the deglacial interval, diversity was low and warm-indicator taxa were absent. Higher production and air temperatures are inferred following the YD, when bulk organic-matter (OM) content (LOI 550?°C) increased substantially and permanently, from 10 to 30?%, a trend paralleled by an increase in C and N abundance, an increase in C:N ratio (to about 12), and a decrease in ??¹³C of sediment. Post-YD warming is marked by a rapid shift in the midge assemblage. Between 8.9 and 8.5?cal?ka, Alnus pollen tripled (25?C75?%), followed by the near-tripling of BSi (7?C19?%) by 8.2?cal?ka, and ??¹⁵N began a steady rise, reflecting the buildup of N and an increase in denitrification in soils. Several chironomid taxa indicative of relatively warm conditions were present throughout the Holocene. Quantitative chironomid-based temperature inferences are complicated by the expansion of Alnus and resulting changes in lake nutrient status and production; these changes were associated with an abrupt increase in cladoceran abundance and persistent shift in the chironomid assemblage. During the last 2,000?years, chironomid-assemblage changes suggest cooler temperatures, and BSi and OM values were generally lower than their maximum Holocene values, with minima during the seventh and eighth centuries, and again during the eighteenth century.     

MedFlux: Investigations of particle flux in the Twilight Zone

The MedFlux project was devised to determine and model relationships between organic matter and mineral ballasts of sinking particulate matter in the ocean. Specifically we investigated the ballast ratio hypothesis, tested various commonly used sampling and modeling techniques, and developed new technologies that would allow better characterization of particle biogeochemistry. Here we describe the rationale for the project, the biogeochemical provenance of the DYFAMED site, the international support structure, and highlights from the papers published here. Additional MedFlux papers can be accessed at the MedFlux web site (http://msrc.sunysb.edu/MedFlux/).     

Evaluation of Liquefaction Potential Index Along Western Coast of South Korea Using SPT and CPT

For South Korea, liquefaction potential along the western coast has not been widely assessed because South Korea is considered to be a low seismic hazard. However, recent earthquake events and historical records indicate that the seismic hazard of South Korea should not be ignored. Moreover, as artificial fills are extensively used along the western coast for development, liquefaction evaluation of the soils in this area is necessary. In this paper, we present: (1) the seismic characteristics of the study area; (2) procedures for evaluating liquefaction potential, focusing on the liquefaction potential index (LPI) approach; and (3) LPI distributions at several representative locations along the western coast of South Korea under various seismic scenarios. The liquefaction potential index represents the liquefaction potential over the upper 20 m of a boring or sounding. Using cone penetration test (CPT) and standard penetration test (SPT) data from two coastal sites, we compare and discuss CPT-based and SPT-based LPI values, particularly values computed in nonplastic, silt-rich soils. In these soils, it appears that the CPT yields lower liquefaction resistance, resulting in large LPI values. Finally, discussion and suggestions are provided for CPT- and SPT-based liquefaction assessment of low plasticity and high fines content soils.     

Rapid visualization of plankton abundance and taxonomic composition using the Video Plankton Recorder

Traditional methods for determining spatial distributions of planktonic taxa involve net, pump, and bottle collections followed by the tedious and time-consuming task of plankton sample analysis. Thus, plankton ecologists often require months or even years to process samples from a single study. In this paper, we present a method that allows rapid visualization of the distribution of planktonic taxa while at sea. Rapid characterization of plankton distributions is essential in the dynamic physical environment, where biological and physical patterns can change quickly. Such a “sample-and-observe” capability is necessary for mapping ephemeral features (such as patches, eddies, jets, plumes) and determining appropriate locations to conduct more localized sampling, including in situ observational studies. We describe the techniques used in imaging the plankton, analyzing the video, and visualizing the data. We present an example of at-sea data analysis conducted aboard R.V. Columbus Iselin on Georges Bank in May 1994 and visualizations of the 3-dimensional distribution of selected planktonic taxa in a 2 × 2 km × 90 m volume of seawater. A video of the image processing and visualization is included on the CD-ROM accompanying this volume and is an essential part of this paper.     

Data assimilation for a coastal area morphodynamic model: Morecambe Bay

This paper investigates the use of data assimilation in coastal area morphodynamic modelling using Morecambe Bay as a study site. A simple model of the bay has been enhanced with a data assimilation scheme to better predict large-scale changes in bathymetry observed in the bay over a 3-year period. The 2DH decoupled morphodynamic model developed for the work is described, as is the optimal interpolation scheme used to assimilate waterline observations into the model run. Each waterline was acquired from a SAR satellite image and is essentially a contour of the bathymetry at some level within the inter-tidal zone of the bay. For model parameters calibrated against validation observations, model performance is good, even without data assimilation. However the use of data assimilation successfully compensates for a particular failing of the model, and helps to keep the model bathymetry on track. It also improves the ability of the model to predict future bathymetry. Although the benefits of data assimilation are demonstrated using waterline observations, any observations of morphology could potentially be used. These results suggest that data assimilation should be considered for use in future coastal area morphodynamic models.     

A Method for Estimating Field-Scale Mass Transfer Rate Parameters and Assessing Aquifer Cleanup Times

A general method for estimating ground-water solute mass transfer rate parameters from field test data is presented. The method entails matching solute concentration and hydraulic head data collected during the recovery phase of a pumping test through application of a simulation-regression technique. Estimation of hydraulic conductivity and mass transfer rate parameter values is performed by fitting model simulations to the data. Parameter estimates are utilized to assess cleanup times for pump-and-treat aquifer remediation scenarios. Uncertainty in the cleanup time estimate is evaluated using statistical information obtained with the parameter estimation technique. Application of the method is demonstrated using a hypothetical ground-water flow and solute transport system. Simulations of field testing, parameter estimation, and remedial time frames are performed to evaluate the usefulness of the method. Sets of random noise that signify potential field and laboratory measurement errors are combined with the hypothetical data to provide rigorous testing of the method. Field tests are simulated using ranges of values for data noise, the mass transfer rate parameters, the test pumping rates, and the duration of recovery monitoring to evaluate their respective influence on parameter and cleanup time estimates. The demonstration indicates the method is capable of yielding accurate estimates of the solute mass transfer rate parameters. When the parameter values for the hypothetical system are well estimated, cleanup time predictions are shown to be more accurate than when calculated using the local equilibrium assumption.     

Chemical classification of iron meteorites—VIII. Groups IC. IIE,IIIF and 97 other irons

Concentrations of Ni, Ga, Ge and Ir in 106 iron meteorites are reported. Three new groups are defined: IC, IIE and IIIF containing 10, 12 and 5 members, respectively, raising the number of independent groups to 12. Group IC is a cohenite-rich group distantly related to IA. Group IIE consists of those irons previously designated Weekeroo Station type and five others having similar compositions though diverse structures. The IIE irons are compositionally similar to the mesosiderites and pallasites, and the three groups probably formed at similar heliocentric distances. The mixing of the globular IIE silicates with the metal probably occurred during shock events. Group IIIF is a well-defined group of low-Ni and low-Ge irons. The compositions of these groups are summarized as follows:

     

48.

Radio galaxies in the 2SLAQ Luminous Red Galaxy Survey – I. The evolution of low-power radio galaxies to  z∼ 0.7      

Elaine M. Sadler  Russell D. Cannon  Tom Mauch  Paul J. Hancock  David A. Wake  Nic Ross  Scott M. Croom  Michael J. Drinkwater  Alastair C. Edge  Daniel Eisenstein  rew M. Hopkins  Helen M. Johnston  Robert Nichol  Kevin A. Pimbblet  Roberto De Propris  Isaac G. Roseboom  Donald P. Schneider  Tom Shanks 《Monthly notices of the Royal Astronomical Society》2007,381(1):211-227

     

49.

Workshop on Formation of the First Solids in the Solar System—Honoring Klaus Keil for his Distinguished Career in Meteoritics and Cosmochemistry     

G. Jeffrey Taylor  Edward R. D. Scott  Gary R. Huss  Alexander N. Krot  Kazuhide Nagashima 《Meteoritics & planetary science》2012,47(12):1889-1890

     

50.

FOUR NEW IRON METEORITE FINDS     

Edward R.D. Scott  John T. Wasson  Richard W. Bild 《Meteoritics & planetary science》1977,12(4):425-436

Four new irons are described; Buenaventura (IIIB) from Chihuahua, Mexico: mass 114 kg; Denver City (anomalous) from Texas, USA: mass 26.1 kg; Kinsella (IIIB) from Alberta, Canada: mass 3.7 kg; and Tacoma (IA) from Washington, USA: mass 17 g. Denver City is unique, i.e., not related to any other known iron. Tacoma is the smallest iron meteorite recorded. All were purchased for the UCLA collection following a publicity drive for new meteorites     

[首页] « 上一页 [1] [2] [3] [4] 5 [6] [7] [8] [9] [10] [11] 下一页 » 末  页»

Group	Ni (%)	Ga (ppm)	Ge (ppm)	Ir (ppm)
IC	6.1–6.8	42–54	85–250	0.07–10
IIE	7.5–9.7	21–28	62–75	0.5–8
IIIF	6.8–7.8	6.3–7.2	0.7–1.1	1.3–7.9

FOUR NEW IRON METEORITE FINDS

Four new irons are described; Buenaventura (IIIB) from Chihuahua, Mexico: mass 114 kg; Denver City (anomalous) from Texas, USA: mass 26.1 kg; Kinsella (IIIB) from Alberta, Canada: mass 3.7 kg; and Tacoma (IA) from Washington, USA: mass 17 g. Denver City is unique, i.e., not related to any other known iron. Tacoma is the smallest iron meteorite recorded. All were purchased for the UCLA collection following a publicity drive for new meteorites