The effect of tidal inlets on open coast storm surge hydrographs

Bridge scour modeling requires storm surge hydrographs as open ocean boundary conditions for coastal waters surrounding tidal inlets. These open coast storm surge hydrographs are used to accurately determine both horizontal and vertical circulation patterns, and thus scour, within the inlet and bay for an extreme event. At present, very little information is available on the effect that tidal inlets have on these open coast storm surge hydrographs. Furthermore, current modeling practice enforces a single design hydrograph along the open coast boundary for bridge scour models. This study expands on these concepts and provides a more fundamental understanding on both of these modeling areas.     

A low level supplementary heating system for free divers

A simple and effective method of heating divers in extreme cold water has been developed. The local heating concept utilizes a uniformly distributed granular mixture of magnesium and iron particles packed in small sachets. Upon activation by sea water, the two metal mixture behaves as a multitude of short-circuited electrolytic cells, producing thermal energy rather than electrical energy. The 45 mm-square sachets may be placed where heating is required on the diver's body, thus giving rise to the term “local heating”, obviously, the heating system requires no pumping device, or distribution network. Heating rate and duration of output of the sachets are controlled by particle size, and mixture ratio of the constituent Mg and Fe particles.This paper described the development, testing and performance of the heating sachets. Results of live tests in different dive situations are also presented and discussed.     

Comparison of the biology, dynamics, and secondary production of Talorchestia brito (Amphipoda, Talitridae) in Atlantic (Portugal) and Mediterranean (Tunisia) populations

The biology, population dynamics, and production of Talorchestia brito were studied at two sandy beaches located on the Atlantic (Portugal) and on the Mediterranean (Tunisia) coasts, respectively. The seasonal variation in abundance and the overall densities were similar in both populations. Reproduction occurred from February to September in the Atlantic, and from March to early November in the Mediterranean. The sex ratio was male biased in the Atlantic, and female biased in the Mediterranean. Based on data from the Atlantic population, both abundance and the proportion of reproductive females were positively correlated with temperature, while the proportion of juveniles in the population was positively correlated with temperature and sediment moisture. On average, individuals from the Atlantic were larger than the ones from the Mediterranean. Life span was estimated at six to nine months in the Atlantic, and five to eight months in the Mediterranean. Talorchestia brito was shown to be a semiannual species, with iteroparous females producing two broods per year, and exhibited a bivoltine life cycle. The minimum age required for males' and females' sexual differentiation and for female sexual maturation was shorter in the Mediterranean. Growth production (P) was estimated at 0.19 g m⁻² y⁻¹ ash free dry weight (AFDW; 4.3 kJ m⁻² y⁻¹) in the Atlantic population, and 0.217 g m⁻² y⁻¹ AFDW (4.9 kJ m⁻² y⁻¹) in the Mediterranean one. Elimination production (E) was estimated at 0.35 g m⁻² y⁻¹ AFDW (7.9 kJ m⁻² y⁻¹) in the Atlantic, and 0.28 g m⁻² y⁻¹ AFDW (6.3 kJ m⁻² y⁻¹) in the Mediterranean. The average annual biomass ( ) (standing stock) was estimated at 0.032 g m⁻² in the Atlantic beach, and 0.029 g m⁻² in the Mediterranean one, resulting, respectively, in ratios of 5.9 and 7.5 and ratios of 10.8 and 9.6. Like other talitrids, T. brito exhibited geographic variation in morphometrical characteristics, sex ratio, growth rates, life span, and reproduction period, with the Atlantic population presenting a slower life history.     

Characterizing Observed Environmental Variability With HF Doppler Radar Surface Current Mappers and Acoustic Doppler Current Profilers: Environmental Variability in the Coastal Ocean

A network of high-frequency (HF) radars is deployed along the New Jersey coast providing synoptic current maps across the entire shelf. These data serve a variety of user groups from scientific research to Coast Guard search and rescue. In addition, model forecasts have been shown to improve with surface current assimilation. In all applications, there is a need for better definitions and assessment of the measurement uncertainty. During a summer coastal predictive skill experiment in 2001, an array of in situ current profilers was deployed near two HF radar sites, one long-range and one standard-range system. Comparison statistics were calculated between different vertical bins on the same current profiler, between different current profilers, and between the current profilers and the different HF radars. The velocity difference in the vertical and horizontal directions were then characterized using the observed root-mean-square (rms) differences. We further focused on two cases, one with relatively high vertical variability, and the second with relatively low vertical variability. Observed differences between the top bin of the current profiler and the HF radar were influenced by both system accuracy and the environment. Using the in situ current profilers, the environmental variability over scales based on the HF radar sampling was quantified. HF radar comparisons with the current profilers were on the same order as the observed environmental difference over the same scales, indicating that the environment has a significant influence on the observed differences. Velocity variability in the vertical and horizontal directions both contribute to these differences. When the potential effects of the vertical variability could be minimized, the remaining difference between the current profiler and the HF radar was similar to the measured horizontal velocity difference (~2.5 cm/s) and below the resolution of the raw radial data at the time of the deployment     

Variability in oceanographic and ecological processes in the Canadian Arctic Archipelago

This paper brings together unpublished historical data sets and published literature to review the role of climatic, oceanographic and ecological processes in the marine ecosystem of the eastern Canadian Archipelago. Physical data include characteristics of the water masses, circulation patterns, sea ice conditions, and climatic records from 1950s onward. Biological data include unpublished data sets on nutrients, primary and secondary production, and sedimentation, which were collected during the 1980–1990s in the eastern Canadian Archipelago. These results show high year-to-year variability in nutrient inventories and ratios, the magnitude of the ice algae and phytoplankton bloom, the timing of ice algae sedimentation in the spring, and the composition of the zooplankton community. The significance of this high interannual variability and its effect on pelagic–benthic coupling processes is discussed in the context of climatic and oceanographic forcing, with emphasis on recent (past decade) Arctic changes. An estimate of total primary production in the Archipelago is also presented, along with published production estimates for other Arctic shelves, showing that the Archipelago may support up to 32% of the total primary production of Arctic shelves. The high year-to-year variability in production and carbon transfer pathways (e.g. pelagic versus benthic) in the Archipelago suggest that the system might be resilient to the increased variability in climatic conditions occurring in the past decade. However, this increased variability combined with directional change in climatic and oceanographic conditions might also modify the existing balance of ecological processes. For example, shifts in the timing of events appear to have already occurred in the past decade, with potential cascading effects throughout the ecosystem.     

Geoacoustic Characterisation of Fine-grained Sediments using Single and Multiple Reflection Data

Fine-grained sediments commonly occur in areas of the continental shelf where wave and current energy are weak. Bulk density, compressional wave speed and attenuation are fundamental physical properties of these sediments required for predicting the response of the seabed for diverse branches of marine science. The traditional coring approach is time and labor-intensive, with large uncertainties associated with sediment disturbance in the sampling phase. Acoustic methods offer the advantages of remote sensing, i.e., sampling the sediment structure without mechanical disturbance and a significantly larger seabed coverage rate per unit time. Two different acoustic methods are described: one using short-range single-bounce interactions with the seabed, and the second using long-range modal propagation to infer the sediment properties. The relative strengths and sensitivities of each approach are explored through simulations guided by experience with measured data.     

A Sensitivity Analysis of the Waterline Method of Constructing a Digital Elevation Model for Intertidal Areas in ERS SAR scene of Eastern England

A sensitivity analysis of the waterline method of constructing a Digital Elevation Model (DEM) of an intertidal zone using remote sensing and hydrodynamic modelling is described. Variation in vertical height accuracy as a function of beach slope is investigated using a set of nine ERS Synthetic Aperture Radar (SAR) images of the Humber/Wash area on the English east coast acquired between 1992 and 1994. Waterlines from these images are heighted using a hydrodynamic tide-surge model and interpolated using block kriging. On 1:500 slope beaches, an average block height estimation standard deviation of 18–22 cm is achieved. This rises to 27 cm on 1:100 slope beaches, and 32 cm on 1:30 slope beaches. The average heighting error at different slopes is decomposed into components due to waterline heighting error, inadequate sensor resolution and interpolation inaccuracy. It is shown that, at 1:500 slope, waterline heighting error and interpolation inaccuracy are the main error sources, whilst at 1:30 slope, errors due to inadequate sensor resolution become dominant. The ability of the technique to generate intertidal DEMs for almost the entire coastal zone in a complete ERS SAR scene covering 100×100 km is demonstrated.