Slope instability phenomena in permafrost regions of Qinghai-Tibet Plateau, China

Permafrost covers a significant area of the Qinghai-Tibet Plateau. Slope instability problem in the region was often neglected, though it plays important roles in engineering construction and landform processes. In this paper, the slope instability phenomena in the permafrost regions on the plateau are discussed. The slope failures often occur in the forms of thaw-induced landslides and gelifluction. Thaw-induced landslides are closely related to active layer detachment and changes of permafrost conditions. Such landslides include retrogressive flow and thaw slump and are hazardous to engineering constructions. Gelifluction includes deep-seated movement and surface movement. It is an important factor in landform planation because it may spread over a large area and remain active for a long period of time.     

Trace Element Analysis of Fused Whole-Rock Glasses by Laser Ablation-ICP-MS and PIXE

The concentrations of fifty trace elements, including relatively volatile elements and transition metal elements, in fused glasses of Geological Survey of Japan rock reference materials GSJ JR-2, JA-1, JA-2, JB-1a, JB-3, JGb-1 and JF-1 were determined by particle (proton) induced X-ray emission (PIXE) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). The fused glasses were prepared by rapid fusion and subsequent quenching in welded platinum capsules and were found to be homogeneous for major elements and for trace elements with concentrations of more than 1 μg g^-1 within the observed precision (± 10% mean) on a 70 μm sampling scale. The values obtained by PIXE and LA-ICP-MS for the transition elements (Cr, Mn, Fe, Ni and Cu), the relatively volatile elements (Zn, Ga, Rb and Pb) and the refractory elements (Y, Zr, Nb and Th) with concentrations greater than a few μg g^-1 showed good agreement (within 10 % relative difference). The values for almost all the elements detected at concentrations higher than 1 μg g^-1 as determined by LA-ICP-MS also agreed well with the reference values (mean relative difference < ± 10%), except for B and Cu. The good agreement confirmed the appropriateness of the NIST SRM 600 series glass calibration reference material for LA-ICP-MS analysis of glasses with variable major-element compositions for almost all elements. The concentrations of Cu in all the samples were lower than the reference values, which was attributed to adsorption of the transition metals onto the platinum capsule during preparation.     

Crystallization of microlites and degassing during magma ascent: Constraints on the fluid mechanical behavior of magma during the Tenjo Eruption on Kozu Island, Japan

Bubble and crystal textures provide information with regard to the kinetics of the vesiculation and crystallization processes. They also provide insights into the fluid mechanical behavior of magma in a conduit. We performed textural (bubble and crystal) and compositional analyses of pyroclasts that were obtained from the Tenjo pyroclastic flow, which resulted on account of the eruption in 838 A.D. on Kozu Island, about 200 km south of Tokyo, Japan. Pyroclasts in one flow unit (300∼2,060 kg/m³; average density 1330 kg/m³) can be classified into three types on the basis of vesicle textures. Type I pyroclasts have small isolated spherical bubbles with higher vesicularities (67–77 vol.%) and number density (10.8–11.7 log m⁻³). Type II pyroclasts have vesicularities similar to type I (61–69 vol.%), but most bubbles exhibit evidences of bubble coalescence, and lower number densities than type I (8.9–9.5 log m⁻³). Type III pyroclasts contain highly deformed bubbles with lower vesicularities (16–34 vol.%) and number densities (8.2–9.0 log m⁻³). The microlite volume fraction (DRE converted) also changes consistently across type I, type II, and type III as 0.06, 0.08, and 0.10–0.15, respectively. However, the number density of the microlites remains nearly invariant in all the pyroclast types. These facts indicate that the variation in the microlite volume fraction is controlled not by the number density (i.e., nucleation process), but by the size (i.e., growth process); the growth history of each type of microlite was different. Water content determinations show that the three types of pumices have similar H₂O contents (2.6±0.2 wt%). This fact implies that all three types were quenched at nearly the same depth (35±5 MPa, assuming that the magma was water-saturated) in the conduit. If the crystal sizes are limited only by growth time, a variation in this parameter can be related to the residence time, which is attributed to the flow heterogeneity in the conduit. By assuming a laminar Poiseuille-type flow, these textural observations can be explained by the difference in ascent velocity and shearing motion across the conduit, which in turn results in the differences in growth times of crystals, degrees of deformation, and bubble coalescence. Consequently, for crystals in the inner part of the conduit, the crystal growth time from nucleation to quenching is shorter than that near the conduit wall. The vesicle texture variation of bubbles in types I, II, and III results from the difference in the deformation history, implying that the effect of degassing occurred primarily towards the conduit wall.     

Operational Data Assimilation System for the Kuroshio South of Japan: Reanalysis and Validation

We describe an operational ocean data assimilation system for the Kuroshio and its validation using a nine-year reanalysis (historical run from 1993 to 2001) dataset of upper-ocean state estimation in the North Pacific. The horizontal structure of volume transport of the Ryukyu Current System (RCS) is shown from the reanalysis: The RCS is connected to the flow of the subtropical gyre, and its volume transport gradually increases from south-east of Okinawa (5–10 Sv) to the east of Amami-Ohshima Island (20 Sv). Comparing the reanalysis with independent observations on the southeast slope of the Amami-Ohshima Island indicates that the root mean square differences (RMSDs) are 0.076 (0.037) m/s in the period of December 1998 to November 1999 (November 1999 to November 2000) respectively. The reanalysis field has a bias (3.1 Sv) of the volume transport of the RCS and the RMSD (3.5 Sv) which is larger than the observed variability (2.81 Sv). Surface velocity and the Kuroshio axis south of Japan are also examined. Comparison of the reanalysis and ADCP data gave maximum RMSD of 0.749 (0.271) m/s in the strong (weak) current regions, respectively. The annual mean value of the axis error is 19 km in 1998. The RMSD of the error is at most 50 km, in 294 cases in the observation period, which is smaller than the observed root mean square variability of the axis (64 km). This revised version was published online in July 2006 with corrections to the Cover Date.     

Distribution,age, and origin of a submarine landslide deposit in the Pleistocene Kiwada Formation,forearc basin fill on the Boso Peninsula,east‐central Japan: Constraints from tephro‐ and biostratigraphy

A mass‐transport deposit named MTD1 (up to 100 m in thickness) is intercalated in the upper Kiwada Formation, a Pleistocene forearc basin fill on the Boso Peninsula, east‐central Japan. The present study aims to examine the origin, age, and distribution of MTD1. MTD1 consists mainly of mudstone blocks containing thin very fine‐ to medium‐grained sandstones, and ranges from tens of centimeters to more than tens of meters in length and thickness. Correlation of marker tuff beds and application of the biostratigraphy of calcareous nannofossils suggest that the blocks in MTD1 were derived from the underlying strata. The total thickness of the stratified blocks from the different stratigraphic horizons exceeds 60 m, implying that MTD1 originated from deeply‐excavated slope failure. The slope failure occurred in a short time interval at ca 1.3 Ma. MTD1 provides an estimate of the height of the escarpment on the basis of the stratigraphic origin of the blocks.     

Blended-acquisition design of irregular geometries towards faster,cheaper, safer and better seismic surveying

The application of blended acquisition has drawn considerable attention owing to its ability to improve the operational efficiency as well as the data quality and health, safety and environment performance. Furthermore, the acquisition of less data contributes to the business aspect, while the desired data density is still realizable via subsequent data reconstruction. The use of fewer detectors and sources also minimizes operational risks in the field. Therefore, a combined implementation of these technologies potentially enhances the value of a seismic survey further. One way to encourage this is to minimize any imperfection in deblending and data reconstruction during processing. In addition, one may derive survey parameters that enable a further improvement in these processes as introduced in this study. The proposed survey design workflow iteratively performs the following steps to derive the survey parameters responsible for source blending as well as the spatial sampling of detectors and sources. The first step is the application of blending and sampling operators to unblended and well-sampled data. We then apply closed-loop deblending and data reconstruction. The residue for a given design from this step is evaluated and subsequently used by genetic algorithms to simultaneously update the survey parameters related to both blending and spatial sampling. The updated parameters are fed into the next iteration until they satisfy the given termination criteria. We also propose a repeated encoding sequence to form a parameter sequence in genetic algorithms, making the size of problem space manageable. The results of the proposed workflow are outlined using blended dispersed source array data incorporating different scenarios that represent acquisition in marine, transition zone and land environments. Clear differences attributed solely to the parameter design are easily recognizable. Additionally, a comparison among different optimization schemes illustrates the ability of genetic algorithms along with a repeated encoding sequence to find better solutions within a computationally affordable time. The optimized parameters yield a notable enhancement in the deblending and data reconstruction quality and consequently provide optimal acquisition scenarios.     

Temporal dynamics of dissolved organic carbon (DOC) produced in a microcosm with red tide forming algae <Emphasis Type="Italic">Chattonella marina</Emphasis> and its associated bacteria

Acute and severe hypoxia associated with harmful algal bloom has become one of the major causes for the environmental deterioration of coastal areas. Although it is generally thought that a large part of the dissolved oxygen consumption at a bloom site is initiated by heterotrophic bacteria that attack organic matter derived from dead or dying algal cells, precise microbial processes leading to the hypoxia are yet to be examined. Here we show temporal dynamics of extracellular dissolved organic carbon (DOC) of the red tide forming raphidophyte Chattonella marina and bacterial populations associating with the algae under laboratory conditions. During the growth of non-axenic strains of C. marina, we monitored abundance of algae, associated bacteria, and DOC in the culture media. Bacterial cell abundance increased in response to the increase in DOC both at the beginning and the late log phase of the algal growth. Flow cytometric analysis revealed that transient increase in the percentage of respiratory-active bacterial cells also coincided with the timing of the increase in bacterial abundance and DOC. These results strongly suggest that DOC released from growing C. marina fuels respiration and growth of planktonic bacteria surrounding the algae. This has implications for the role of DOC released from C. marina bloom before the collapse in mediating interactions between neighboring algae and bacterial assemblage which may eventually lead to algal bloom-associated hypoxia.     

Temporal changes in benthic communities of seagrass beds impacted by a tsunami in the Andaman Sea,Thailand

Seagrass beds are susceptible to various natural and human-induced disturbances. Disturbances affect not only seagrasses, but also the abundance and diversity of associated macrofaunal communities. The Andaman Sea coast of Thailand was heavily affected by the tsunami of December 26, 2004. To examine its impact on seagrass macrofaunal communities, we compared the abundance, diversity and taxa composition by quantitative samplings in 2001 (before the tsunami) and in 2005 and 2006 (after the tsunami). Macrobenthic animals and sediments were collected from vegetated and nonvegetated areas of two sites that had received different levels of tsunami disturbances. A large decline in abundance and diversity was observed in the nonvegetated areas after the tsunami, whereas an increase was observed in the vegetated areas. The magnitude of decline and subsequent recovery of abundance and diversity of macrobenthic animals in nonvegetated areas were similar between the two sites, suggesting that their temporal changes were not solely related to the magnitude of the tsunami disturbance. Similarity of the benthic animals differed greatly between 2001 and 2005–2006 at the nonvegetated areas, whereas it varied less among the 3 years at the seagrass-vegetated areas. This study demonstrated that the presence of seagrass vegetation alters the patterns of temporal variation in macrofaunal assemblages and subsequent recovery processes following a tsunami.