Seismic response of a cut‐and‐cover tunnel isolated by polymer material

An effective method for the seismic retrofitting of the sidewalls of cut‐and‐cover tunnels has not yet been established. Thus, a new method of seismic retrofitting for cut‐and‐cover tunnels, called the ‘polymer isolation method’, is developed here. In this method, thin walls made of polymer materials, called ‘isolation walls’, are inserted between the ground and the sidewalls of a tunnel. We demonstrate the effectiveness of the proposed method in reducing the seismic response of tunnels by using some numerical simulations. It is found that the proposed method depends on the thickness of the soil cover over the tunnel and the ratio of the stiffness between the soil and the structure. Furthermore, a simple chart is proposed for convenience to represent the applicability of the polymer isolation method to the design of seismic retrofits for cut‐and‐cover tunnels. Although this particular chart has been obtained through a limited case, some other typical cases in which the chart can also be implemented for special conditions are addressed, and the applicability and the limitations of this chart are suggested for possible conditions of the ground and of tunnel structures. Copyright © 2012 John Wiley & Sons, Ltd.     

Level of electrostatic excitation associated with relativistic beam-plasma system and pulsar radiation

A class of pulsar models which provide a stationary beam-plasma system as the source of radiation is considered. Since the beam-plasma system is stable near the pulsar where the coherent curvature radiation damps the longitudinal mode, we consider the beam-plasma system away from the star so that the effects of curvature radiation may be neglected. We find that the total wave energy density may attain a significant fraction of the beam energy density provided that the beam and plasma carry away a comparable amount of energy from the star. It should be noted that the attained high wave energy density is peculiar to a relativistic beam-plasma interaction.     

Propagating tsunami wave and subsequent resonant response signals detected by HF radar in the Kii Channel,Japan

Signals from the tsunami waves induced by the March 11, 2011 moment magnitude (M_w) 9.0 Tohoku-Oki earthquake and from subsequent resonances were detected as radial velocity variability by a high-frequency ocean surface radar (HF radar) installed on the eastern coast of the Kii Channel, at a range of about 1000 km from the epicenter along the eastern to southern coasts of Honshu Island. A time–distance diagram of band-passed (9–200 min) radial velocity along the beam reveals that the tsunami waves propagated from the continental shelf slope to the inner channel as progressive waves for the first three waves, and then natural oscillations were excited by the waves; and that the direction of the tsunami wave propagation and the axis of the natural oscillations differed from that of the radar beam. In addition, spectral analyses of the radial velocities and sea surface heights obtained in the channel and on the continental shelf slope suggest complex natural oscillation modes excited by the tsunami waves.     

The significance of silica precipitation on the formation of the permeable–impermeable boundary within Earth's crust

The hydrological system within Earth's crust is divided into the permeable zone and the underlying, much less permeable zone. In this study, we investigated the solubility and precipitation kinetics of silica in water under the conditions of the Kakkonda geothermal field, Japan, where well WD‐1a penetrates the boundary between the hydrothermal convection zone and the heat conduction zone. We found that quartz solubility has a local minimum at the depth of the hydrological boundary, at ~3100‐m depth (380 °C and 24 MPa), in the case of either hydrostatic conditions or fluid pressure increase above hydrostatic at deeper levels. The hydrothermal experiments reveal that rapid quartz precipitation occurs via nucleation when fluids are brought from the liquid region to the supercritical region. The preferential precipitation of quartz at a specific depth plays a significant role in forming and sustaining the permeable–impermeable boundary in the crust.     

福建沿海铝质A型花岗岩的地球化学及岩石成因

以乌山、金刚山和新村三个典型岩体为例,系统研究了福建沿海铝质Ａ型花岗岩的地质和地球化学特征。研究结果表明,铝质Ａ型花岗岩常含有锰铝榴石、富锰白云母等特征的富铝矿物,化学成分上相对富铝,为一套准铝到弱过铝的岩石组成,并具有贫磷、贫钛,氧化指数较低等特征。与碱性花岗岩相比,其Ｎｂ、Ｔａ、Ｚｒ、Ｈｆ、Ｇａ、Ｙ和Ｚｎ等元素的含量及稀土总量和Ｇａ／Ａｌ比值均偏低,但轻、重稀土的分馏程度（尤其是重稀土的分馏程     

Possible variation in methane flux caused by gas hydrate formation on the northeastern continental slope off Sakhalin Island, Russia

The Sakhalin Slope Gas Hydrate Project (SSGH) is an international collaborative effort by scientists from Japan, Korea, and Russia to investigate natural gas hydrates (GHs) that have accumulated on the continental slope off Sakhalin Island, Okhotsk Sea. From 2009 to 2011, field operations of the SSGH-09, -10, and -11 projects were conducted. GH-bearing and -free sediment cores were retrieved using steel hydro- and gravity corers. The concentrations of sulfate ions in sediment pore waters were measured to investigate sulfate concentration–depth profiles. Seventeen cores showed linear depth profiles of sulfate concentrations. In contrast, eight cores and two cores showed concave-up and -down profiles plausibly explained by sudden increase and decrease in methane flux from below, respectively, presumably caused by the formation of gas hydrate adjacent to the core sampling sites.     

Mathematical approach to calculate indices for depositional environments of pelagic-hemipelagic-terrigenous sediments on the basis of metallic element concentrations

Modern marine sediments can be classified into terrigenous, hemipelagic, and pelagic types according to the distances from the land for the sites recovered and in terms of lithological characteristics of sediments. Ancient cherts are the best sedimentary rocks to reconstruct ancient depositional environments and hemipelagic and pelagic cherts can be identified in terms of lithologic and stratigraphic characteristics. However, geochemical characteristics of modern sediments and ancient cherts can discriminate them into these three types. Particularly, the degree of correlation between Fe and Mg in clay minerals is the most effective criterion for the classification, because the concentration of pelagic clay minerals in which the Fe/Mg ratio is constant may become indices for the classification into the three types. The correlation coefficient and goodness-of-fit to a certain regression line were used as indices of the classification and calculated for several sets of modern sediments and ancient cherts totalling to more than 400 samples. The correlation coefficients and the student-t values for the coefficients become better classification indices than the goodness-of-fit andF-values of the analysis of variance. Goodness-of-fit andF-values can be only used as subsidiary indices for the main classification indices of the correlation coefficients. The classification on the basis of the degree of correlation between Fe and Mg is effective and this approach can be used for other major chemical elements such as Al, K, and Na, if some sequential values of chemical analyses are available.     

Temporal dynamics of dissolved organic carbon (DOC) produced in a microcosm with red tide forming algae <Emphasis Type="Italic">Chattonella marina</Emphasis> and its associated bacteria

Acute and severe hypoxia associated with harmful algal bloom has become one of the major causes for the environmental deterioration of coastal areas. Although it is generally thought that a large part of the dissolved oxygen consumption at a bloom site is initiated by heterotrophic bacteria that attack organic matter derived from dead or dying algal cells, precise microbial processes leading to the hypoxia are yet to be examined. Here we show temporal dynamics of extracellular dissolved organic carbon (DOC) of the red tide forming raphidophyte Chattonella marina and bacterial populations associating with the algae under laboratory conditions. During the growth of non-axenic strains of C. marina, we monitored abundance of algae, associated bacteria, and DOC in the culture media. Bacterial cell abundance increased in response to the increase in DOC both at the beginning and the late log phase of the algal growth. Flow cytometric analysis revealed that transient increase in the percentage of respiratory-active bacterial cells also coincided with the timing of the increase in bacterial abundance and DOC. These results strongly suggest that DOC released from growing C. marina fuels respiration and growth of planktonic bacteria surrounding the algae. This has implications for the role of DOC released from C. marina bloom before the collapse in mediating interactions between neighboring algae and bacterial assemblage which may eventually lead to algal bloom-associated hypoxia.     

Rapid subsidence of the Kikai Seamount inferred from drowned Pleistocene coral limestone: Implication for subduction of the Amami Plateau,northern Philippine Sea

Carbonate rock cores drilled on the Kikai Seamount, northern Philippine Sea are examined for better understanding of tectonic history of the northern Philippine Sea. The Kikai Seamount, the summit of which is at 1960 m water depth, is an isolated high on the northwestern part of the Amami Plateau formed by subduction-related arc volcanism, and is situated close to the axis of the Ryukyu Trench in front of the Ryukyu Arc, SW Japan. The seamount is capped with shallow-water carbonates such as coral rudstone. Detailed examinations of lithology, larger foraminiferal assemblages, and Sr isotope composition reveal that the core material comprises Miocene carbonates unconformably overlain by Early Pleistocene carbonates. It indicates rapid subsidence of the Kikai Seamount since the Early Pleistocene. The most probable cause of rapid subsidence is collision and subduction of the Amami Plateau laden with the Kikai Seamount. The rapid subsidence may have started when the western corner of the plateau reached the Ryukyu Trench and began subduction beneath the Ryukyu Arc. The onset of the subsidence is likely to be controlled by a motion change in the Philippine Sea Plate. The latest change in subduction direction from north to northwestward into northwestward to west has been believed to have occurred at 1-2 Ma during latest Pliocene to Early Pleistocene time. The change of direction resulted in the shift from oblique into right-angle subduction of the plate beneath the Ryukyu Arc and also the onset of the collision and subduction of the Amami Plateau.