Importance of feeding on regenerable parts of prey for juvenile stone flounder Platichthys bicoloratus in estuarine habitats

Prey availability is one of the most important factors affecting the quality of nursery grounds. Estuaries play an important role as nursery grounds for juvenile stone flounder, but the mechanism behind the consistently high availability of prey has never been examined. This study investigates which prey is mainly selected by juvenile stone flounder (15–55 mm standard length) in the estuary of the Natori River, northern Japan. In a cage experiment, juveniles showed positive selection for the palps of the spionid polychaete Pseudopolydora kempi in March, and for the siphons of the bivalve Nuttallia olivacea in April, May and June in both sandy and muddy-sand habitats. This selective predation showed that sublethal predation on regenerable parts of invertebrates is important for stone flounder. Nuttallia olivacea, the dominant bivalve in the estuary, was more abundant and in better somatic condition in the sandy area in spite of the stronger siphon-cropping pressure by juvenile stone flounder. These results confirm that sublethal predation on highly abundant benthos plays an important role in forming estuarine habitats into areas of high prey availability for juvenile stone flounder, which leads to their high growth rate.     

Hydration of rhyolitic glass during weathering as characterized by IR microspectroscopy

The mechanism and rate of hydration of rhyolitic glass during weathering were studied. Doubly polished thin sections of two rhyolites with different duration of weathering (Ohsawa lava: 26,000 yr, Awanomikoto lava: 52,000 yr) were prepared. Optical microscope observation showed that altered layers had developed along the glass surfaces. IR spectral line profile analysis was conducted on the glass sections from the surface to the interior for a length of 250 μm and the contents of molecular H₂O (H₂O_m), OH species (OH) and total water (H₂O_t) were determined. The diffusion profile of H₂O_m in Ohsawa lava extends beyond the layer observed by optical microscope. The content of H₂O_m in the hydrated region is much higher than that of OH species. Thus, the reaction from H₂O_m to OH appears to be little and H₂O_m is the dominant water species moving into the glass during weathering. Based on the concentration profiles, the diffusion coefficients of H₂O_m(D_H2Om) and H₂O_t(D_H2Ot) were determined to be 2.8 × 10⁻¹⁰ and 3.4 × 10⁻¹⁰ μm² s⁻¹ for Ohsawa lava, and 5.2 × 10⁻¹¹ and 4.1 × 10⁻¹¹ μm² s⁻¹ for Awanomikoto lava, respectively. The obtained D_H2Om during weathering are more than 2-3 orders of magnitude larger than the diffusion coefficient at ∼20 °C that is extrapolated from the diffusivity data for >400 °C. This might suggest that the mechanism of water transport is different at weathering conditions and >400 °C.     

Phosphorus mass balance in a highly eutrophic semi-enclosed inlet near a big metropolis: a small inlet can contribute towards particulate organic matter production

Terrigenous loading into enclosed water bodies has been blamed for eutrophic conditions marked by massive algal growth and subsequent hypoxia due to decomposition of dead algal cells. This study aims to describe the eutrophication and hypoxia processes in a semi-enclosed water body lying near a big metropolis. Phosphorus mass balance in a small inlet, Ohko Inlet, located at the head of Hiroshima Bay, Japan, was quantified using a numerical model. Dissolved inorganic phosphorous inflow from Kaita Bay next to the inlet was five times higher than that from terrigenous load, which may cause an enhancement of primary production. Therefore, it was concluded that not only the reduction of material load from the land and the suppression of benthic flux are needed, but also reducing the inflow of high phosphorus and oxygen depleted water from Kaita Bay will form a collective alternative measure to remediate the environmental condition of the inlet.     

Energy dissipation behaviour of shear panels made of low yield steel

This paper presents the results of a pilot test conducted for evaluating the energy dissipation behaviour of shear panels made of low yield steel whose 0.2 per cent offset yield stress is 120 MPa. A total of six full-scale shear panels were tested with the loading condition, stiffener spacing, and magnitude of axial force as test variables. The shear panels tested yielded at a shear force that is approximately 1/3 of the yield shear force of equivalent shear panels made of common mild steel. Shear panels with proper stiffener arrangement exhibited stable hysteresis, thus ensuring large energy dissipation capacity. Sufficient strain hardening was observed in the shear panels tested, with their energy dissipation capacity about 1.5 times larger than that of an equivalent linear-elastic and perfect-plastic system. Plate buckling did not lead the shear panels to immediate degradation in their energy dissipation capacity. Post-buckling resistance was found to be a subject that requires further studies for quantifying the performance of shear panels made of low yield stress steel as hysteretic dampers.     

Flare ribbon expansion and energy release

We report a detailed examination about the relationship between the evolution of the Hα flare ribbons and the released magnetic energy during the April 10 2001 flare. In the Hα images, several bright kernels are observed in the flare ribbons. We identified the conjugated foot-points, by analyzing the lightcurves at each Hα kernels, and showed their connectivities during the flare. Then, based on the magnetic reconnection model, we calculated quantitatively the released energy by using the photospheric magnetic field strengths and separation speeds of the Hα flare ribbons. Finally, we examined the downward motions which are observed at the Hα kernels. We found that the stronger the red-asymmetry tends to be associated with the brighter the Hα kernel.     

WEATHERING OF PALEOZOIC MARBLES IN THE INDEPENDENCE HILLS AND PATRIOT HILLS,ELLSWORTH MOUNTAINS,ANTARCTICA

Weathering processes in the Ellsworth Mountains of Antarctica are dominated by frost action. These processes were observed to be different on the same group of marbles under different slope conditions. North- and south-facing walls of the bedrock showed the same shattering rate in the summer of 1992–1993. Frost shattering of rocks is controlled by surface temperature, moisture, and the physical properties of the rock. The most important control on frost shattering in this area was moisture availability, given the same bedrock and freeze-thaw cycle. Snow particles are moved by katabatic winds, bringing moisture to the rock. Moisture is collected mainly in lower cliffs and cols. [Key words: weathering, marble, moisture conditions, Antarctica.]     

Pressure responses of portlandite and H–D isotope effects on pressure-induced phase transitions

The pressure responses of portlandite and the isotope effect on the phase transition were investigated at room temperature from single-crystal Raman and IR spectra and from powder X-ray diffraction using diamond anvil cells under quasi-hydrostatic conditions in a helium pressure-transmitting medium. Phase transformation and subsequent peak broadening (partial amorphization) observed from the Raman and IR spectra of Ca(OH)₂ occurred at lower pressures than those of Ca(OD)₂. In contrast, no isotope effect was found on the volume and axial compressions observed from powder X-ray diffraction patterns. X-ray diffraction lines attributable to the high-pressure phase remained up to 28.5 GPa, suggesting no total amorphization in a helium pressure medium within the examined pressure region. These results suggest that the H–D isotope effect is engendered in the local environment surrounding H(D) atoms. Moreover, the ratio of sample-to-methanol–ethanol pressure medium (i.e., packing density) in the sample chamber had a significant effect on the increase in the half widths of the diffraction lines, even at pressures below the hydrostatic limit of the pressure medium.     

http://www.sciencedirect.com/science/article/pii/S1674987112001028

A study on the effect of the solar ultra-violet radiation on the human skin fibroblast cells revealed that the production of matrix metalloproteinase-2 was inhibited by the radiation.A CO2 incubator connected by optical fibers to a reflector telescope for collecting the solar light was built at Syowa station by the 49th Japanese Antarctica Research Expedition.The direction of the telescope was continuously controlled by a sun-tracker to follow the movement of the Sun automatically.The intensity of the collected light was monitored by a portable spectrophotometer housed inside.The human skin fibroblast cells were incubated in the CO2 chamber to investigate the effect of the solar radiation at Syowa station and were compared with those reference experiments at a laboratory in Japan.The results showed cell damage by strong UV radiation.The production of matrix metalloproteinase-2 was prompted by the moderate UV-B,but was inhibited by the strong UV-B radiation,as studied under laboratory conditions in Japan.The effect of strong solar radiation at Syowa station involving the radiation of UV-B region was estimated to be of the same extent of the radiation caused by an artificial UV-B light with the intensity more than 50 mJ/cm2.     

Sequentially sampled gas hydrate water,coupled with pore water and bottom water isotopic and ionic signatures at the Kukuy mud volcano,Lake Baikal: ambiguous deep-rooted source of hydrate-forming water

The isotopic and ionic composition of pure gas hydrate (GH) water was examined for GHs recovered in three gravity cores (165–193 cm length) from the Kukuy K-9 mud volcano (MV) in Lake Baikal. A massive GH sample from core St6GC4 (143–165 cm core depth interval) was dissociated progressively over 6 h in a closed glass chamber, and 11 sequentially collected fractions of dissociated GH water analyzed. Their hydrogen and oxygen isotopic compositions, and the concentrations of Cl^– and HCO₃ ^– remained essentially constant over time, except that the fraction collected during the first 50 minutes deviated partly from this pattern. Fraction #1 had a substantially higher Cl^– concentration, similar to that of pore water sampled immediately above (135–142 cm core depth) the main GH-bearing interval in that core. Like the subsequent fractions, however, the HCO₃ ^– concentration was markedly lower than that of pore water. For the GH water fractions #2 to #11, an essentially constant HCO₃ ^–/Cl^– ratio of 305 differed markedly from downcore pore water HCO₃ ^–/Cl^– ratios of 63–99. Evidently, contamination of the extracted GH water by ambient pore water probably adhered to the massive GH sample was satisfactorily restricted to the initial phase of GH dissociation. The hydrogen and oxygen isotopic composition of hydrate-forming water was estimated using the measured isotopic composition of extracted GH water combined with known isotopic fractionation factors between GH and GH-forming water. Estimated δD of ?126 to ?133‰ and δ¹⁸O of ?15.7 to ?16.7‰ differed partly from the corresponding signatures of ambient pore water (δD of ?123‰, δ¹⁸O of ?15.6‰) and of lake bottom water (δD of ?121‰, δ¹⁸O of ?15.8‰) at the St6GC4 coring site, suggesting that the GH was not formed from those waters. Observations of breccias in that core point to a possible deep-rooted water source, consistent with published thermal measurements for the neighboring Kukuy K-2 MV. By contrast, the pore waters of core St6GC4 and also of the neighboring cores GC2 and GC3 from the Kukuy K-9 MV show neither isotopic nor ionic evidence of such a source (e.g., elevated sulfate concentration). These findings constrain GH formation to earlier times, but a deep-rooted source of hydrate-forming water remains ambiguous. A possible long-term dampening of key deep-water source signatures deserves further attention, notably in terms of diffusion and/or advection, as well as anaerobic oxidation of methane.     

Transition zone structure under a stationary hot spot: Cape Verde

We report on a two-year seismic deployment in the Cape Verde Islands, one goal of which was to study the upper mantle to determine its structure under a hot spot that is stationary in the hot spot reference frame. We find from analysis of P-to-S receiver functions estimated from broadband seismic recordings that, within uncertainty, the time separation between the 410 and 660 km discontinuities is normal compared to radial earth models. Thus, to exist, even stationary hot spots do not require vertical thermal anomalies from deep melting sources anchored in the lower mantle or at the core–mantle boundary or their anomalies are narrower than ～ 250 km in the upper mantle.