Evolution of Miocene fluvial environments, eastern Potwar plateau, northern Pakistan

The Miocene-Pliocene Siwalik Group records changing fluvial environments in the Himalayan foreland basin. The Nagri and Dhok Pathan Formations of this Group in the eastern Potwar Plateau, northern Pakistan, comprise relatively thick (tens of metres) sandstone bodies and mudstones that contain thinner sandstone bodies (metres thick) and palaeosols. Thick sandstone bodies extend for kilometres normal to palaeoflow, and are composed of large-scale stratasets (storeys) stacked laterally and vertically adjacent to each other. Sandstone bodies represent single or superimposed braided-channel belts, and large-scale stratasets represent channel bars and fills. Channel belts had widths of km, bankfull discharges on the order of 10³ cumecs and braiding parameter up to about 3. Individual channel segments had bankfull widths, maximum depths, and slopes on the order of 10² m, 10¹ m and 10^?4 respectively, and sinuosities around 1-1. These rivers are comparable to many of those flowing over the megafans of the modern Indo-Gangetic basin, and a similar depositional setting is likely. Thin sandstone bodies within mudstone sequences extend laterally for on the order of 10² m and have lobe, wedge, sheet and channel-form geometries: they represent crevasse splays, levees and floodplain channels. Mudstones are relatively bioturbated/disrupted and represent mainly floodbasin and lacustrine deposition. Mudstones and sandstones are extremely disrupted in places, showing evidence of prolonged pedogenesis. These ‘mature’ palaeosols are m thick and extend laterally for km. Lateral and vertical variations in the nature of their horizons apparently depend mainly on deposition rate. The 500 m-thick Nagri Formation has a greater proportion and thicker sandstone bodies than the overlying 700 m-thick Dhok Pathan Formation. The thick sandstone bodies and their large-scale stratasets thicken and coarsen through the Nagri Formation, then thin and fine at the base of the Dhok Pathan Formation. Compacted deposition rates increase with sandstone proportion (0-53 mm/year for Nagri, 0-24 mm/year for Dhok Pathan), and palaeosols are not as well developed where deposition rates are high. Within both formations there are 100 m-scale variations (representing on the order of 10⁵ years) in the proportion and thickness of thick sandstone bodies, and tens-of-m-scale alternations of thick sandstone bodies and mudstone-sandstone strata that represent on the order of 10⁴ years. Formation-scale stratal variations extend across the Potwar Plateau for at least 100 km, although they may be diachronous: however, 100-m and smaller scale variations can only be traced laterally for up to tens of km. Alluvial architecture models indicate that increases in the proportion and thickness of thick sandstone bodies can be explained by increasing channel-belt sizes (mainly), average deposition rate and avulsion frequency on a megafan comparable in size to modern examples. 100-m-scale variations in thick sandstone-body proportion and thickness could result from ‘regional’ shifts in the position of major channels, possibly associated with ‘fan lobes’on a single megafan or with separate megafans. However, such variations could also be related to local changes in subsidence rate or changes in sediment supply to the megafan system. Formation-scale and 100-m-scale stratal variations are probably associated with interelated changes in tectonic uplift, sediment supply and basin subsidence. Increased rates of hinterland uplift, sediment supply and basin subsidence, recorded by the Nagri Formation, may have resulted in diversion of a relatively large river to the area. Alternatively, changing river sizes and sediment supply rates may be related to climate changes affecting the hinterland (possibly linked to tectonic uplift). Climate during deposition of the Siwalik Group was monsoonal. Although the deposits contain no direct evidence for climate change, independent evidence indicates global cooling throughout the Miocene, and the possibility of glacial periods (e.g. around 10-8 Ma, corresponding to base of Nagri Formation). If the higher Himalayas were periodically glaciated, a mechanism would exist for varying sediment supply to megafans on time scales of 10⁴-10⁵ years. Although eustatic sea-level changes are related to global climatic change, they are not directly related to Siwalik stratigraphic changes, because the shoreline was many 100 km away during the Miocene.     

Impact of rangeland enclosure and seasonal grazing on protected and unprotected rangelands in Chakwal region,Pakistan

Scrub rangelands support livestock grazing and provide ecosystem services to their inhabitants.The present study was conducted in Chakwal,an important tract of ...     

Seismic sources for southern Pakistan and seismic hazard assessment of Karachi

Natural Hazards - Karachi is Pakistan’s largest city with population exceeding 18 million and is amongst the top five most congested cities in the world. Karachi has experienced no earthquake...     

Is Ziarat a Potential Site for Conventional or Unconventional Energy Resources?

A structural interpretation of the Ziarat block in the Balochistan region (a part of the Suleiman Fold and Thrust Belt) has been carried out using seismic and seismological data. Seismic data consists of nine 2.5D pre‐stack migrated seismic lines, whereas the seismological data covers the Fault Plane Solution and source parameters. Structural interpretation describes two broad fault sets of fore and back thrusts in the study area that have resulted in the development of pop‐up structures, accountable for the structural traps and seismicity pattern in terms of seismic hazard. Seismic interpretation includes time and depth contour maps of the Dungan Formation and Ranikot group, while seismological interpretation includes Fault Plane Solution, that is correlated with a geological and structural map of the area for the interpretation of the nature of the subsurface faults. Principal stresses are also estimated for the Ranikot group and Dungan Formation. In order to calculate anisotropic elastic properties, the parameters of the rock strength of the formations are first determined from seismic data, along with the dominant stresses (vertical, minimum horizontal, and maximum horizontal). The differential ratio of the maximum and minimum horizontal stresses is obtained to indicate optimal zones for hydraulic fracturing, and to assess the potential for geothermal energy reservoir prospect generation. The stress maps indicate high values towards the deeper part of the horizon, and low towards the shallower part, attributed to the lithological and structural variation in the area. Outcomes of structural interpretation indicate a good correlation of structure and tectonics from both seismological and seismic methods.     

A COMPARISON OF IP TRANSIENT SHAPES OVER DISSEMINATED AND MASSIVE SULFIDE SHEETS IN THE LOWER PILLOW LAVAS OF CYPRUS*

A number of time-domain IP traverses were carried out across two parallel mineralized sheets in the Lower Pillow Lavas, near Mitsero, Cyprus with Huntec Mark III equipment using the pole-dipole array. In one sheet the mineralization was disseminated (2%S), and in the other it was massive (30%S). The transients were recorded at separation n= 2 at a number of points to give the complete shape of the curves. The normalized time integrals were anomalous over the two sheets, but were not significantly different; the highest values being observed over the disseminated sheet. Both sheets were also associated with high electromagnetic components of the decay curve. The chargeability and resistivity values obtained over the disseminated body were considerably higher. The metal factor was also of value in discriminating between massive ore, disseminated mineralization, and barren rock. The values of P₂ and P₃ for the two bodies were also compared (P₂ and P₃ are defined by where M₁ to M₄ are the amplitudes of the decay curve at 55, 130, 280 and 580 ms respectively). For the massive ore, P was inversely related to M, but for the disseminated ore P was independent of M. Four simple parameters from the decay curves show that indices of curve shape offer the best prospect of grade discrimination.     

A Review of the Bentong-Raub Suture vis-à-vis New Insight of the Tectonic Evolution of Malay Peninsula, South East Asia

As a milestone of the entire energy industry, unconventional resources have inevitably swept the world in the last decade, and will certainly dominate the global oil and gas industry in the near future. Eventually, the “unconventional” will become “conventional”. Along with the rapid development, however, some issues have emerged, which are closely related to the viability of unconventional resources development. Under the current circumstances of low crude oil and gas price, coupled with the prominent environmental concerns, the arguments about the development and production of unconventional resources have been recently heated up. This work introduced the full-blown aspects of unconventional resources especially shale reservoirs, by discussing their concepts and definitions, reviewing the shale gas and shale oil development history and necessity, analyzing the shale plays’ geology and petroleum systems with respects to key hydrocarbon accumulation elements and mechanisms, and summarizing the technology resolution. This study also discussed the relevant key issues, including significant estimation uncertainty of technically recoverable resources, the equivocal understanding of complex geology preventing the production and technologies implementation optimization, the difficulties of experiences and technologies global expanding, and the corresponding risks and uncertainties. In addition, based on the latest production and exploration data, the future perspective of the unconventional resources was depicted from global unconventional resources assessments, technology development, and limitations constraining the development.     

Updated earthquake catalogue for seismic hazard analysis in Pakistan

A reliable and homogenized earthquake catalogue is essential for seismic hazard assessment in any area. This article describes the compilation and processing of an updated earthquake catalogue for Pakistan. The earthquake catalogue compiled in this study for the region (quadrangle bounded by the geographical limits 40–83° N and 20–40° E) includes 36,563 earthquake events, which are reported as 4.0–8.3 moment magnitude (M_W) and span from 25 AD to 2016. Relationships are developed between the moment magnitude and body, and surface wave magnitude scales to unify the catalogue in terms of magnitude M_W. The catalogue includes earthquakes from Pakistan and neighbouring countries to minimize the effects of geopolitical boundaries in seismic hazard assessment studies. Earthquakes reported by local and international agencies as well as individual catalogues are included. The proposed catalogue is further used to obtain magnitude of completeness after removal of dependent events by using four different algorithms. Finally, seismicity parameters of the seismic sources are reported, and recommendations are made for seismic hazard assessment studies in Pakistan.     

TEST OF RECIPROCITY AND SUPERPOSITION IN TIME DOMAIN INDUCED POLARIZATION MEASUREMENTS*

The principles of reciprocity and superposition, which hold in normal resistivity measurements, are sometimes considered to apply also to Induced Polarisation measurements. In this paper, an account is given of experiments designed to test how far such a proposition is justified. The experiments comprise a limited field test and more extensive observations using a tank analogue. Within acceptable limits, both tests showed that these basic theorems are applicable to I.P. potentials provided that these are measured at the same instant after switch off and that identical charging regimes are used. The implications of these findings are discussed.