Landforms along transverse faults parallel to axial zone of folded mountain front,north-eastern Kumaun Sub-Himalaya,India

The shape of the frontal part of the Himalaya around the north-eastern corner of the Kumaun Sub-Himalaya, along the Kali River valley, is defined by folded hanging wall rocks of the Himalayan Frontal Thrust (HFT). Two parallel faults (Kalaunia and Tanakpur faults) trace along the axial zone of the folded HFT. Between these faults, the hinge zone of this transverse fold is relatively straight and along these faults, the beds abruptly change their attitudes and their widths are tectonically attenuated across two hinge lines of fold. The area is constituted of various surfaces of coalescing fans and terraces. Fans comprise predominantly of sandstone clasts laid down by the steep-gradient streams originating from the Siwalik range. The alluvial fans are characterised by compound and superimposed fans with high relief, which are generated by the tectonic activities associated with the thrusting along the HFT. The truncated fan along the HFT has formed a 100 m high-escarpment running E–W for ～5 km. Quaternary terrace deposits suggest two phases of tectonic uplift in the basal part of the hanging wall block of the HFT dipping towards the north. The first phase is represented by tilting of the terrace sediments by ～30 ^° towards the NW; while the second phase is evident from deformed structures in the terrace deposit comprising mainly of reverse faults, fault propagation folds, convolute laminations, flower structures and back thrust faults. The second phase produced ～1.0 m offset of stratification of the terrace along a thrust fault. Tectonic escarpments are recognised across the splay thrust near south of the HFT trace. The south facing hill slopes exhibit numerous landslides along active channels incising the hanging wall rocks of the HFT. The study area shows weak seismicity. The major Moradabad Fault crosses near the study area. This transverse fault may have suppressed the seismicity in the Tanakpur area, and the movement along the Moradabad and Kasganj–Tanakpur faults cause the neotectonic activities as observed. The role of transverse fault tectonics in the formation of the curvature cannot be ruled out.     

Two-fluid cosmological models in a Bianchi type I space-times

In this paper we present anisotropic, homogeneous two-fluid cosmological models in a Bianchi I space-time. These classes of cosmological models picture two different scenarios of cosmic history; viz., when the radiation and matter content of the universe are in interactive phase and another when the two are non-interacting. The universe is highly anisotropic in the initial stages, however, anisotropy tapers out to insignificance in due course of cosmic evolution. In every model the anisotropy of the space-time is determined by the density parameter Ω₀ at the present epoch. For Ω₀=1, the anisotropy is washed out before long. An interesting class of models, having an inflationary epoch in finite future, is discovered.      

Zonal mean circulation at the cloud level on Venus: Spring and fall 1979 OCPP observations

Cloud motions were obtained from a number of images acquired in reflected solar ultraviolet light during spring and fall of 1979 from the Pioneer Venus Orbiter Cloud Photopolarimeter (OCPP) to determine the zonal mean circulation of the atmosphere of Venus at the cloud top level. The meridional profile of the zonal component of motion is somewhat different from that previously obtained from Mariner 10 and preliminary Pioneer Venus observations, although the equatorial magnitude is about the same (?94 m/sec). The mean meridional motion is toward the south pole south of about 5° south latitude, and toward the north pole north of this latitude, with peak mean magnitudes of about 7 m/sec polewards of 20° north and 40° south latitudes in the respective hemispheres. From the few measurements obtained at higher latitudes the magnitude of the mean meridional component appears to decrease although it is still directed toward the respective poles. Due to the evolution of the cloud patterns over the duration of the images from which the cloud velocities are obtained, the uncertainties in the mean zonal and meridional components may be as large as 5–10 and 2–4 m/sec, respectively. Preliminary estimates of meridional momentum transport show that the mean circulation dominates the eddy circulation transport completely, in agreement with the estimates obtained from Mariner 10 data, although the uncertainties in both the mean and eddy circulation transports are large. The momentum transports are polewards and their peak magnitudes occur at latitudes between 20° and 40° in both the hemispheres.     

Impact of nonlocal boundary-layer diffusion scheme on forecasts over Indian region

Summary The results of incorporating a nonlocal boundary-layer diffusion scheme in a forecast model over Indian region are discussed. The simple formulation of atmospheric boundary layer height in the nonlocal diffusion scheme is examined in detail to understand how far the model simulated boundary layer height is realistic. Analyses of the temporal and spatial variability of the boundary height for three cases representing premonsoon, active monsoon and post monsoon conditions over Indian region show that it is comparable with the observational evidence. Further, for a case of active monsoon condition over Indian region, comparison of precipitation forecasts with the nonlocal scheme and the control local boundary-layer scheme clearly indicated that the model run with the nonlocal scheme is significantly more accurate in forecasting the intense precipitation locations. Received November 16, 2001 Revised December 28, 2001     

Automated interpretation of sub-pixel water cover from satellite images

Accurate information and estimation of area under water cover is important for different engineering applications and decision processes. This paper defines a method for direct interpretation and estimation of the sub-pixel water cover from satellite images. It is a fuzzy knowledge based approach wherein features are represented by Linguistic Variables. In this study, more than 95% accuracy has been found in case of hard classification and 85% in case of sub-pixel estimation. The proposed approach can be utilised in an automated image understanding system.     

Semi‐active control of sliding isolated bridges using MR dampers: an experimental and numerical study

Sliding base‐isolation systems used in bridges reduce pier drifts, but at the expense of increased bearing displacements under near‐source pulse‐type earthquakes. It is common practice to incorporate supplemental passive non‐linear dampers into the isolation system to counter increased bearing displacements. Non‐linear passive dampers can certainly reduce bearing displacements, but only with increased isolation level forces and pier drifts. The semi‐active controllable non‐linear dampers, which can vary damping in real time, can reduce bearing displacements without further increase in forces and pier drifts; and hence deserve investigation. In this study performance of such a ‘smart’ sliding isolation system, used in a 1:20 scaled bridge model, employing semi‐active controllable magneto‐rheological (MR) dampers is investigated, analytically and experimentally, under several near‐fault earthquakes. A non‐linear analytical model, which incorporates the non‐linearities of sliding bearings and the MR damper, is developed. A Lyapunov control algorithm for control of the MR damper is developed and implemented in shake table tests. Analytical and shake table test results are compared. It is shown that the smart MR damper reduces bearing displacements further than the passive low‐ and high‐damping cases, while maintaining isolation level forces less than the passive high‐damping case. Copyright © 2005 John Wiley & Sons, Ltd.     

Morphological and strength analysis of PCC bottom ash amended with bentonite

Within the last few years several studies have been completed to evaluate strength, stiffness, and durability properties of pulverized coal combustion (PCC) bottom ash mixed with various admixtures. Studies have shown that strength and stiffness of PCC bottom ash mixed with sodium bentonite changes with the increase in the curing period. Researchers have concluded that this change is due to the chemical composition of the bottom ash and bentonite. In order to understand the reasons for the change in characteristics of bottom ash-bentonite mixtures with time, the strength and structural characteristics of bottom ash-bentonite mixtures cured for various periods was evaluated. Results of the strength testing showed increase in strength and stiffness of the mixtures with curing period. The results of structural analysis using environmental scanning electron microscopy show development of fibrous elements which may cause increase in the unconfined compressive strength and stiffness of the mixtures with the curing period. Selected results from this study are presented herein.     

Multi-scale assessment of invasive plant species diversity using Pléiades 1A,RapidEye and Landsat-8 data

We used a full remote sensing-based approach to assess plant species diversity in large and inaccessible areas affected by Lantana camara L., a common invasive species within the deciduous forests of Western Himalayan region of India, using spectral heterogeneity information extracted from optical data. The spread of L. camara was precisely mapped by Pléiades 1A data, followed by comparing Pléiades 1A, RapidEye and Landsat-8 OLI – assessed plant species diversities in invaded areas. The single plant species analysis was improved by Pléiades 1A-based diversity analysis, and higher species diversity values were observed for mixed vegetation cover. Furthermore, lower Coefficient of Variation and Renyi diversity values were observed where L. camara was the only species, while higher variations were observed in areas with a mixed spectral reflectance. This study was concluded to add a crucial baseline to the previous studies on remote sensing-based solutions for rapid estimation of biodiversity attributes.     

Trend in Observed and Projected Maximum and Minimum Temperature over N-W Himalayan Basin

Recently, study in past trends of climate variables gained significant consideration because of its contribution in adaptions and mitigation strategies for potential future changes in climate, primarily in the area of water resource management. Future interannual and inter-seasonal variations in maximum and minimum temperature may bring significant changes in hydrological systems and affect regional water resources. The present study has been performed to observe past(1970-2010) as well as future(2011-2100)spatial and temporal variability in temperature(maximum and minimum) over selected stations of Sutlej basin located in North-Western Himalayan region in India. The generation of future time series of temperature data at different stations is done using statistical downscaling technique. The nonparametric test methods, modified Mann-Kendall test and Cumulative Sum chart are used for detecting monotonic trend and sequential shift in time series of maximum and minimum temperature. Sen’s slope estimator test is used to detect the magnitude of change over a period of time on annual and seasonal basis. The cooling experienced in annual TMax and TMin at Kasol in past(1970-2010) would be replaced by warming in future as increasing trends are detected in TMax during 2020 s and 2050 s and in TMin during 2020 s, 2050 s and 2080 s under A1 B and A2 scenarios. Similar results of warming are also predicted at Sunnifor annual TMin in future under both scenarios which witnessed cooling during 1970-2010. The rise in TMin at Rampur is predicted to be continued in future as increasing trends are obtained under both the scenarios. Seasonal trend analysis reveals large variability in trends of TMax and TMin over these stations for the future periods.     

Dating of Columbite-tantalite and Monazite from Pegmatites of the Kawadgaon–Challanpara Area,Bastar Craton,Central India

The results of geochronological studies on columbite-tantalite and monazite from the rare metal pegmatites of the Kawadgaon–Challanpara area in Bastar craton, central India are presented. Columbite-tantalite yielded U-Pb concordia upper intercept age of 1978±16 Ma (MSWD = 0.18). Radiogenic ²⁰⁷Pb*/²⁰⁶Pb* (T_7/6) ages on 4 out of 5 columbite-tantalite vary in a narrow range of 1903 to 2077 Ma and are similar to U-Pb age, whereas, one sample shows younger ²⁰⁷Pb*/²⁰⁶Pb*(T_7/6) age of 1728 Ma. Younger Pb-Pb age of 1744 ± 250 Ma (MSWD = 150) has also been indicated by these columbite-tantalite samples. Four out of five monazite samples define Pb-Pb errorchron age of 2050±370 Ma (MSWD = 165) and radiogenic ²⁰⁷Pb*/²⁰⁶Pb* (T_7/6) ages on 3 out of 5 monazites show a narrow range of 1983 to 2083 Ma. Other two samples show younger ²⁰⁷Pb*/²⁰⁶Pb*(T_7/6) ages as 1254 Ma and 1592Ma. Both monazite and columbite-tantalite indicate disturbance in Pb and U isotopic systematics as revealed by high MSWD. However, selected samples from both monazite and columbite-tantalite indicate age of their formation as c. 2000 Ma. Younger ages, i.e., 1254 to 1744 Ma are indicative of later geological disturbances. Reported age of c. 2000 Ma is comparable to Rb-Sr date of pegmatitic muscovite (1850-2330 Ma) from this area and is younger to intrusive granites of c. 2500 Ma. By analogy, therefore, it may be inferred that the age of the rare element mineralization may be ~2000 Ma old, and linked with younger granitic activity that spanned over the period from 2300 to 2100 Ma in the Bastar craton.