Quantitative reconstruction of Holocene precipitation changes in southern Patagonia

Holocene variations in annual precipitation (P_ann) were reconstructed from pollen data from southern Argentinian Patagonia using a transfer function developed based on a weighted-averaging partial least squares (WA-PLS) regression. The pollen–climate calibration model consisted of 112 surface soil samples and 59 pollen types from the main vegetation units, and modern precipitation values obtained from a global climate database. The performance (r² = 0.517; RMSEP = 126 mm) of the model was comparable or slightly lower than in other comparable pollen–climate models. Fossil pollen data were obtained from a sediment core from Cerro Frias site (50°24'S, 72°42'W) located at the forest-steppe ecotone. Reconstructed P_ann values of about 200 mm suggest dry conditions during the Pleistocene–Holocene transition (12,500–10,500 cal yr BP). P_ann values were about 300–350 mm from 10,500 to 8000 cal yr BP and increased to 400–500 mm between 8000 and 1000 cal yr BP. An abrupt decrease in P_ann at about 1000 cal yr BP was associated with a Nothofagus decline. The reconstructed P_ann suggests a weakening and southward shift of the westerlies during the early Holocene and intensification, with no major latitudinal shifts, during the mid-Holocene at high latitudes in southern Patagonia.     

The recognition of former melt flux through high‐strain zones

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.     

Shellfish as the impetus for embayment management

Concern about declining stocks of municipally managed shellfish species in Orleans, Massachusetts, led to several shellfish enhancement programs. Projects included bottom and raft culture of hatchery-raised seed, hatchery and upweller techniques, transplants of seed and adult shellfish, and other management options. However, deterioration of water quality and habitat prompted the town to initiate a multifaceted program to address the issues causing environmental degradation. A water-quality task force, appointed to determine solutions to the problems, recommended changes in land-use practices. A drainage remediation program was undertaken at five sites, resulting in the reopening of a viable shellfish area for the first time in 12 yr. Issues concerning nutrient enrichment, groundwater flow and depth, flushing characteristics of the embayments, proliferation of private docks and piers in the public tidelands, effect of barrier beach dynamics including erosion control measures, and the number of users and diversity of their activies employed on the waters themselves will be addressed in current municipal planning initiatives.     

Brittle-plastic deformation in initially dry rocks at fluid-present conditions: transient behaviour of feldspar at mid-crustal levels

We present detailed microstructural and chemical analyses from an initially dry anorthositic rock deformed during wet amphibolite facies conditions. Three different domains representing the microstructural variation of the deformed samples are investigated in detail in terms of fracture morphology and mode, grain characteristics and chemistry of present phases. Results show transient deformational behaviour where a close interaction between brittle, plastic and fluid-assisted deformation mechanisms can be observed. Our analysis allows us to describe the succession, interrelationships and effects of active mechanisms with progressively increasing strain in three so-called stages. In Stage 1, initial fracturing along cleavage planes promoted fluid influx that caused fragmentation and chemical reactions, producing fine-grained mineral assemblages in the fractures. Deformation twins and dislocations developed in clast pieces due to stress relaxation. Passive rotation of conjugate fracture sets and interconnection of intracrystalline fractures formed micro-shear-zones, constituting Stage 2. Microstructures and grain relationships indicate the activity and fluctuation between fracturing, dissolution-precipitation creep, grain boundary sliding and locally dislocation creep, reflecting the transient behaviour of brittle and plastic deformation mechanisms. Further rotation and widening of fractures into overall foliation parallel shear-bands (Stage 3) promoted strain partitioning into these areas through increased fluid influx, influence of fluid-assisted grain boundary sliding, phase mixing and presence of weak phases such as white mica. We suggest that local differences in fluid availability, volume fraction of weak phases produced by fluid present metamorphic reactions coupled with volume increase and local variations in stress concentration induced transient brittle-plastic behaviour. The studied shear-zone represents an example of the transformation of a rigid dry rock to a soft wet rock during deformation through syntectonic fracturing.     

Building a 3D geomodel for water resources management: case study in the Regional Park of the lower courses of Manzanares and Jarama Rivers (Madrid, Spain)

Water resources management of protected sites requires a powerful tool to analyze the process and changes that are occurring in the environment. This paper describes a 3D geomodel design of the Jarama River Detrital Aquifer located in Madrid (Spain). That hydrogeological unit is included in the “Parque Regional de los Cursos Bajos de los Ríos Manzanares y Jarama” (Regional Park of the Lower Courses of Manzanares and Jarama Rivers). The goal of this work is to define a method by which a three-dimensional (3D) model can be created with hydrogeologic geometry real of main aquifer, to accomplish an adequate management of the groundwater resources. All data used in this study were integrated in a geographic database: geological and hydrogeological information, geological map (1:25,000), eleven cross-sections, piezometric maps and a digital elevation model. The constructed 3D model of the Jarama Aquifer shows geometric features and spatial distribution and variations of geologic units. Thus, the 3D model allows the assessment of volumes of each unit, the depth and thickness variations of the main aquifer, and the spatial and temporal variations of water tables. From the 3D model, the most suitable areas (in terms of groundwater protection) for managed recharge and mining works have been identified.     

Ultrahigh temperature deformation microstructures in felsic granulites of the Napier Complex, Antarctica

Detailed electron microscope and microstructural analysis of two ultrahigh temperature felsic granulites from Tonagh Island, Napier Complex, Antarctica show deformation microstructures produced at  1000 °C at 8–10 kbar. High temperature orthopyroxene (Al 7 wt.% and  11 wt.%), exhibits crystallographic preferred orientation (CPO) and frequent subgrain boundaries which point to dislocation creep as the dominating deformation mechanism within opx. Two different main slip systems are observed: in opx bands with exclusively opx grains containing subgrain boundaries with traces parallel to [010] and a strong coupling of low angle misorientations (2.5°–5°) with rotation axes parallel to [010] the dominating slip system is (100)[001]. Isolated opx grains and grain clusters of 2–5 grains embedded in a qtz–fsp matrix show an additional slip system of (010)[001]. The latter slip system is harder to activate. We suggest that differences in the activation of these slip systems is a result of higher differential stresses imposed onto the isolated opx grains and grain clusters. In contrast to opx, large qtz grains (up to 200 μm) show random crystallographic orientation. This together with their elongate and cuspate shape and the lack of systematic in the rotation axes associated with the subgrain boundaries is consistent with diffusion creep as the primary deformation mechanism in quartz.Our first time detailed microstructural observations of ultrahigh temperature and medium to high pressure granulites and their interpretation in terms of active deformation mechanisms give some insight into the type of rheology that can be expect at lower crustal conditions. If qtz is the mineral phase governing the rock rheology, Newtonian flow behaviour is expected and only low differential stress can be supported. However, if the stress supporting mineral phase is opx, the flow law resulting from dislocation creep will govern the rheology of the rock unit; hence, an exponential relationship between stress and strain rate is to be expected.     

Assessing the Vibrational Frequencies of the Cathedral of Cologne (Germany) by Means of Ambient Seismic Noise Analysis

Ambient seismic noise measurements were conducted inside the Cathedral of Cologne (Germany) for assessing its frequencies of vibration and for checking whether these occur in the range where soil amplification is expected. If this is the case, damages may increase in case of an earthquake due to an increased structural response of the building. Analysis of the ratio between the horizontal and vertical components of the spectra recorded at stations located inside the building as well as the ratio between the corresponding components of the spectra recorded simultaneously inside the building and at a reference station placed in the basement of the cathedral indicated several modes of vibration. Facilitated by these results an assessment of the seismic vulnerability was attempted for a 2D ground motion scenario using the finite element method.     

Forest–savanna–morichal dynamics in relation to fire and human occupation in the southern Gran Sabana (SE Venezuela) during the last millennia

The southern Gran Sabana (SE Venezuela) holds a particular type of neotropical savanna characterized by the local occurrence of morichales (Mauritia palm swamps), in a climate apparently more suitable for rain forests. We present a paleoecological analysis of the last millennia of Lake Chonita (4°39′N–61°0′W, 884 m elevation), based on biological and physico-chemical proxies. Savannas dominated the region during the last millennia, but a significant vegetation replacement occurred in recent times. The site was covered by a treeless savanna with nearby rainforests from 3640 to 2180 cal yr BP. Water levels were higher than today until about 2800 cal yr BP. Forests retreated since about 2180 cal yr BP onwards, likely influenced by a higher fire incidence that facilitated a dramatic expansion of morichales. The simultaneous appearance of charcoal particles and Mauritia pollen around 2000 cal yr BP supports the potential pyrophilous nature of this palm and the importance of fire for its recent expansion. The whole picture suggests human settlements similar to today – in which fire is an essential element – since around 2000 yr ago. Therefore, present-day southern Gran Sabana landscapes seem to have been the result of the synergy between biogeographical, climatic and anthropogenic factors, mostly fire.     

Metals in tidal flats colonized by microbial mats within a South-American estuary (Argentina)

In this study, we measured the concentrations of metals (Cd, Cu, Pb, Ni, Cr, Zn, Hg, Mn, and Fe) and assessed the characteristics of tidal flats (grain size and organic matter content) in sediments and their overlying microbial mats fractions to evaluate the anthropogenic impact within the Bahía Blanca Estuary (BBE). Puerto Rosales (PR) and Almirante Brown (AB), located in the middle and inner zone of the estuary, respectively, were used as sampling sites. Sediments were composed mainly of silt–clay in AB, whereas first fine-grained particles were coarser in depth in PR. Regarding the concentration of metals in both fractions, we found differences between sites: There were higher concentrations of overall metals in AB relative to PR. In addition, higher concentrations of Cu were recorded in the first centimeters of AB tidal flats, whereas higher concentration of Cd were recorded in microbial mats of PR. Considering that the grain size was similar between sites, these results are consistent with the high concentration of organic matter found in AB, probably because this site is close to a former municipal dump and sewage discharges. Also, the higher Cd content found in PR site would highlight both the influence of untreated urban discharges and port anthropogenic activities. In conclusion, this study allowed identifying high values of some metals in the presence of microbial mats in the BBE, thus suggesting a possible interaction between both, at least for metals like Cu or Cd.     

A New Appraisal of Sri Lankan BB Zircon as a Reference Material for LA‐ICP‐MS U‐Pb Geochronology and Lu‐Hf Isotope Tracing

A potential zircon reference material (BB zircon) for laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) U‐Pb geochronology and Hf isotope geochemistry is described. A batch of twenty zircon megacrysts (0.5–1.5 cm³) from Sri Lanka was studied. Within‐grain rare earth element (REE) compositions are largely homogeneous, albeit with some variation seen between fractured and homogeneous domains. Excluding fractured cathodoluminescence bright domains, the variation in U content for all analysed crystals ranged from 227 to 368 μg g^?1 and the average Th/U ratios were between 0.20 and 0.47. The Hf isotope composition (0.56–0.84 g/100 g Hf) is homogeneous within and between the grains – mean ¹⁷⁶Hf/¹⁷⁷Hf of 0.281674 ± 0.000018 (2s). The calculated alpha dose of 0.59 × 10¹⁸ g^?1 for a number of BB grains falls within the trend of previously studied, untreated zircon samples from Sri Lanka. Aliquots of the same crystal (analysed by ID‐TIMS in four different laboratories) gave consistent U‐Pb ages with excellent measurement reproducibility (0.1–0.4% RSD). Interlaboratory assessment (by LA‐ICP‐MS) from individual crystals returned results that are within uncertainty equivalent to the TIMS ages. Finally, we report on within‐ and between‐grain homogeneity of the oxygen isotope systematic of four BB crystals (13.16‰ VSMOW).