New method for estimating reference evapotranspiration and comparison with alternative methods in a fruit-producing hub in the semi-arid region of Brazil

Theoretical and Applied Climatology - Analysing alternative methods for estimating reference evapotranspiration (ET0) is essential for improving the management of water resources, especially where...     

Aram Chaos and its constraints on the surface heat flux of Mars

The surface heat flux of a planet is an important parameter to characterize its internal activity and to determine its thermal evolution. Here we report on a new method to constrain the surface heat flux of Mars during the Hesperian. For this, we explore the consequences for the martian surface heat flux from a recently presented new hypothesis for the formation of Aram Chaos (Zegers, T.E., Oosthoek, J.H.P., Rossi, A.P., Blom, J.K., Schumacher, S. [2010]. Earth Planet. Sci. Lett. 297, 496-504. doi:10.1016/j.epsl.2010.06.049.). In this hypothesis the chaotic terrain is thought to have formed by melting of a buried ice sheet. The slow sedimentation and burial of the ice sheet led to an increased thermal insulation of the ice and subsequently to a temperature increase high enough to trigger melting and the formation of the subsurface lake. As these processes highly depend on the thermal properties of the subsurface and especially on the surface heat flux, it is possible to constrain the latter by using numerical simulations. Based on the hypothesis for the formation of Aram Chaos, we conducted an extensive parameter study to determine the parameter settings leading to sufficient melting of the buried ice sheet. We find that the surface heat flux in the Aram Chaos region during the Hesperian was most likely between 20 and 45 mW m⁻² with a possible maximum value of up to 60 mW m⁻².     

SUMMER DIURNAL WIND PATTERNS AT 3,000 m SURFACE LEVEL,FRONT RANGE,COLORADO, U.S.A.

Observations of hourly wind speeds and directions were taken over a 56-day period in summer 1978, at the 3,000 m ground level near an INSTAAR mountain research site on the east slope of the Front Range, Colorado Rockies. During nearly calm weather, which persisted for longer periods than normal in summer 1978, the pattern of diurnal wind variations resembles results from other mountain studies of wind along high mountain slopes. However, timing of high wind speeds during the daily cycle is not readily explainable, although hypotheses can be offered. Results of this study can assist in interpretations of forest clearing microclimates at high elevations in the mountains and in important air quality questions (e.g., precipitation pH) in the Rocky Mountains.     

Establishing the wave climate influence on the morphodynamics of a coastal lagoon inlet

The morphologic changes in estuaries and coastal lagoons are very complex and constitute a challenging task in coastal research. The bathymetric changes result from the combined action of tides, waves, rivers discharge and wind stress in the area of interest. Additionally, an accurate knowledge of the sediment transport is essential to achieve a good morphological characterization. This work establishes the influence of the wave climate on the morphodynamics of the Ria de Aveiro lagoon inlet by analysing the numerical results of the morphodynamic modelling system MORSYS2D. The numerical simulations considered a realistic coupled forcing of tidal currents and waves. The computed sediment fluxes and bathymetric changes are analysed and compared with the erosion and accretion trends obtained from the numerical simulations forced only by tidal currents, in order to establish the wave climate influence. The final bathymetry and the corresponding changes are compared with bathymetric data collected through surveys. It is concluded that: (a) the morphodynamics of the study area is dominated by the wave regime in the lagoon inlet and nearshore areas, while in the inner areas is tidally dominated; and (b) the inclusion of the wave regime forcing constitutes an improvement in order to accurately reproduce the local morphodynamics.     

Study of vertical structure of aerosol optical properties with sun photometers and ceilometer during the MACRON campaign in 2007

This paper presents the measurements of a vertical structure of aerosol optical properties performed during the MACRON (Maritime Aerosol, Clouds and Radiation Observation in Norway) campaign, which took place in July and August 2007 at ALOMAR observatory on Andøya island (69.279°N, 16.009°E, elevation 380 m a.s.l.). The mean value of the aerosol optical thickness (AOT) at 500 nm during campaign was 0.12. Significant increase of the AOT above longtime mean value was observed on 7 and 8 August 2007 when the AOT exceeded 0.4 at 500 nm. Analyses of back trajectories show the aerosol transported from over Africa and Central Europe. The aerosol extinction coefficient obtained from the synergy of ceilometer and sun photometer observations reached 0.05–0.08 km^?1 (at 1064 nm) in the dust layer. The single scattering albedo at the ALOMAR observatory decreased during the dust episode to 0.93–0.94, which indicates some absorptive aerosols in the lower PBL.     

Relation between beachface morphology and wave climate at Trafalgar beach (Cádiz, Spain)

Two years of offshore wave data and daily time exposure images from Trafalgar beach, a 2-km-long sandy beach located on the southwest coast of Spain that frequently exhibits rhythmic features, were used to (1) explore the variability of the beachface morphology and (2) determine environmental conditions associated with the different morphological states. The beachface morphology at three distinct alongshore sectors was analyzed and classified and five different morphological states were found that are related with the presence or absence of beach cusps and a berm: (1) large beach cusps, (2) small beach cusps, (3) low-tide terrace; (4) plane beach berm and (5) plane beach. The predominant beachface morphology is characterized by the presence of large beach cusps, and the main wave climate consisted of offshore significant wave heights ranging from 0.5–1 m and wave periods between 4 and 12 s. An alongshore variation of the morphology is found which might be related to the nearshore wave variability (SWAN wave model results). The morphologies are, in some cases, well-correlated with the daily offshore incident wave climate (described by the daily maximum significant wave height and the corresponding period), particularly for the moderate to high energy wave conditions. Small beach cusps appear under short period waves, whereas when the wave periods are longer the morphology tends to change to large beach cusps. This transition only occurs if the forcing is maintained as constant for a certain duration, which depends itself on the wave energy. It is concluded that correlations over 90% are only found for the highest wave energy conditions or under long wave periods. For the remainder, it is not possible to generally correlate the beachface morphology based only on the wave forcing because the previous morphological state cannot be ignored.     

Effects of the toxic dinoflagellate Alexandrium tamarense on the greenshell mussel Perna canaliculus

Abstract

Oxygen consumption, grazing rate, and byssus production of the greenshell mussel Perna canaliculus were measured following exposure to bloom concentrations (10⁶ cells l^?1 ) of a toxic clone of the dinoflagellate AIexandrium tamarense (GT429), using anon‐toxic clone of the same species (PLY173) as control. Following feeding for 1 h on GT429, mussels (dry weight 54–127 mg) showed significantly increased oxygen uptake at 15°C (0.08 μl O₂ (mg dry tissue weight)^?1 ) compared with control mussels. However, following 24 h recovery, oxygen uptake was similar to initial values in all experimental conditions. The grazing rate of P. canaliculus fed upon toxic clone GT429 was 4.58 ± 0.76 cells mg^?1 h^?1 compared with 1.99 ± 0.47 cells mg^?1 h^?1 for PLY173. On exposure to A. tamarense, mussels maintained normal opening behaviour and there was no change in the byssus production over 24 h. It was concluded that P. canaliculus showed no dramatic physiological effects following short‐term feeding on the toxic strain of A. tamarense. During 2 weeks’ exposure to twice daily bloom concentrations of GT429, there was no mussel mortality. Toxicity in the tissues was 1295 μg STX equivalent per 100 g tissue, levels at which these mussels would be unsuitable for human or animal consumption.     

From noise correlation to resonant ultrasound spectroscopy in rock acoustics

This article introduces an alternative experimental procedure for measuring the elastic properties of a solid material at laboratory scale, using both the principles of passive seismic interferometry and resonance ultrasound spectroscopy. We generate noise into the studied sample with a pneumatic air blow gun, and we cross‐correlate the signals recorded with two passive piezoelectric sensors put in soft contact with the sample surface. Resonance phenomena are induced in the sample, but in contrast with conventional resonance ultrasound spectroscopy experiments, we have no control over the injected frequencies that are sent all together within the noise spectrum. The spectrum of the correlogram is a good approximation of the resonance spectrum of the vibrating sample and can be inverted in terms of the elastic moduli of the constituent material of the sample. The experimental procedure is validated on samples made of standard materials (here, aluminium and Plexiglas) by consistently comparing the inverted elastic velocities with the velocities independently measured with the conventional technique of ultrasonic pulse transmission. Moreover, we got similar positive results on dry rock samples, such as Vilhonneur limestone. These encouraging preliminary results open up promising prospects for monitoring fluid substitution in rock samples using the technique described in this paper.     

A flume experiment on wood storage and remobilization in braided river systems

This work investigates wood dynamics in braided streams through physical modelling in a mobile bed laboratory flume, with the specific objective to characterize wood storage and turnover as a function of wood input rate and of wood element type. Three parallel channels (1.7 m wide, 10 m long) filled with uniform sand were used to reproduce braided networks with constant water discharge and sediment feeding. Wood dowels with and without simplified root wads were regularly added at the upstream end of each flume at different input rates, with a 1:2:3 ratio between the three flumes. Temporal evolution of wood deposition patterns and remobilization rates were monitored by a series of vertical images that permitted the recognition of individual logs. Results show that wood tends to disperse in generally small accumulations (< 5 logs), with higher spatial density on top of sediment bars, and is frequently remobilized due to the intense morphological changes. The amount of wood stored in the channel depends on log input rate through a non‐linear relationship, and input rates exceeding approximately 100 logs/hour determine a sharp change in wood dynamics, with higher storage volume and augmented formation of large jams (> 10 elements) that are less prone to remobilization. Presence of root wads seems to play a minor role in wood deposition, but it reduces the average travel distance of logs. Turnover rates of logs were similar in the three flumes, independently of wood input rate and largely resembling the turnover rate of exposed bars. For the simulated conditions, significant effects of wood on bed morphology were not observed, suggesting that interactions with fine sediments and living vegetation are crucial to form large, stable wood jams able to bring about relevant morphological changes. Copyright © 2014 John Wiley & Sons, Ltd.