The 2010 Yushu earthquake triggered landslide hazard mapping using GIS and weight of evidence modeling

The Yushu County, Qinghai Province, China, April 14, 2010, earthquake triggered thousands of landslides in a zone between 96°20′32.9″E and 97°10′8.9″E, and 32°52′6.7″N and 33°19′47.9″N. This study examines the use of geographic information system (GIS) technology and Bayesian statistics in creating a suitable landslide hazard-zone map of good predictive power. A total of 2,036 landslides were interpreted from high-resolution aerial photographs and multi-source satellite images pre- and post-earthquake, and verified by selected field checking before a final landslide-inventory map of the study area could be established using GIS software. The 2,036 landslides were randomly partitioned into two subsets: a training dataset, which contains 80 % (1,628 landslides), for training the model; and a testing dataset 20 % (408 landslides). Twelve earthquake triggered landslide associated controlling parameters, such as elevation, slope gradient, slope aspect, slope curvature, topographic position, distance from main surface ruptures, peak ground acceleration, distance from roads, normalized difference vegetation index, distance from drainages, lithology, and distance from all faults were obtained from variety of data sources. Landslide hazard indices were calculated using the weight of evidence model. The landslide hazard map was compared with training data and testing data to obtain the success rate and predictive rate of the model, respectively. The validation results showed satisfactory agreement between the hazard map and the existing landslide distribution data. The success rate is 80.607 %, and the predictive rate is 78.855 %. The resulting landslide hazard map showed five classes of landslide hazard, i.e., very high, high, moderate, low and very low. The landslide hazard evaluation map should be useful for environmental recovery planning and reconstruction work.     

Crystal bending,subgrain boundary development,and recrystallization in orthopyroxene during granulite-facies deformation

A prominent feature of a granulite-facies shear zone from the Hidaka Main Zone (Japan) is the folding of orthopyroxene (opx) porphyroclasts. Dislocation density estimated by transmission electron microscope (TEM) and chemical etching in homogeneously folded domains is too low to account for the amplitude of crystallographic bending, leading us to propose a model similar to “flexural slip” folding, where folded layers are micrometer-wide opx layers between thin planar clinopyroxene (cpx) exsolutions. Extension (compression) in the extrados (intrados) of the folded layer is accommodated by dislocations at the cpx–opx interfaces. Alternatively to distributed deformation, crystal bending also localizes in grain boundaries (GBs), mostly oriented close to the (001) plane and with various misorientation angles but misorientation axes consistently close to the b-axis. For misorientation up to a few degrees, GBs were imaged as tilt walls composed of regularly spaced (100)[001] dislocations. For misorientation angles of 7°, individual dislocations are no longer visible, but high-resolution TEM (HRTEM) observation showed the partial continuity of opx tetrahedral chains through the boundary. For 21° misorientation, the two adjacent crystals are completely separated by an incoherent boundary. In spite of these atomic-scale variations, all GBs share orientation and rotation axis, suggesting a continuous process of misorientation by symmetric incorporation of (100)[001] dislocations. In addition to the dominant GBs perpendicular to the (100) plane, boundaries at low angle with (100) planes are also present, incorporating dislocations with a component of Burgers vector along the a-axis. The two kinds of boundaries combine to delimit subgrains, which progressively rotate with respect to host grains around the b-axis, eventually leading to recrystallization of large porphyroclasts.     

Metamorphic alteration,mineral paragenesis and geochemical re-equilibration of early Archean quartz–amphibole–pyroxene gneiss from Akilia,Southwest Greenland

Quartz–amphibole–pyroxene gneiss from the island of Akilia, Southwest Greenland has been claimed to contain the earliest traces of life on Earth in the form of biogenic carbonaceous matter encapsulated as inclusions in apatite crystals. Various lines of evidence, including petrography, geochronology, field relations, and geochemistry, have, however, been presented that challenge this interpretation. Textural relationships and geochemical signatures in this controversial gneiss presented here manifest a complex, spatially variable metamorphic history that includes granulite- and amphibolite-facies overprints and metasomatism. A peak metamorphic, granulite-facies, quartz–orthopyroxene–clinopyroxene–amphibole–magnetite assemblage is preserved in only a few centimeter-scale layers within the 5-m-thick, quartz–amphibole–pyroxene gneiss unit. Calcite veinlets that appear to postdate the peak metamorphism occur in pyroxene. The quartz–amphibole–pyroxene gneiss unit has subsequently experienced isochemical (except hydration) amphibolite-facies alteration during which pyroxenes were retrogressed to amphiboles and magnetite, and calcite was consumed. Parts of the quartz–amphibole–pyroxene gneiss that contain texturally late hornblende have experienced metasomatic alteration by Al-carrying fluids. These fluids controlled the alteration of pyroxenes and amphiboles to hornblende, and modified the trace-element composition by remobilizing LREE and Eu. Apatite has variable REE composition and ⁸⁷Sr/⁸⁶Sr in the quartz–amphibole–pyroxene gneiss, but on the local scale (cm) is in equilibrium with co-existing silicates. Effective recrystallization of apatite crystals as well as co-existing silicates during several stages of the metamorphic history makes the intact preservation of diagenetic apatite with encapsulated primary carbonaceous matter implausible. Hence, it is highly unlikely that Akilia apatite could serve as repository of the earliest traces of life on Earth.     

Kita-Uebaru natural rock slope failure and its back analysis

A large landslide occurred in Kita-Uebaru (or Asato) area of Nakagusuku village in Okinawa Island (Japan) on 10 June 2006 after a rainy period of about 9 days. The total rainfall was 126 mm from June 8 till the time of the landslide this period. This landslide destroyed several buildings and roads, and the total travel distance of the landslide was about 110 m. In this article, the authors were concerned with the initiation conditions of Kita-Uebaru landslide and post-failure motions of the landslide body. The observations made in the landslide area, structural geology analyses and outcomes of geotechnical investigations are described first. Then, possible causes of the landslide are investigated through back analyses using as inputs the geological structure and the strength properties of planes of discontinuities involved in the sliding processes. The final part of the article is concerned with the simulation of post-failure motions of the landslide body. The results of the investigations and back analyses indicate that the failure plane was bi-planar and the heavy torrential rainy period for about 3 days was the main cause of initiation of the landslide. The mechanical model presented in this article was capable of capturing the overall features of the landslide body following the initiation of the failure.     

Room-temperature equation of state of Li<Subscript>2</Subscript>VOSiO<Subscript>4</Subscript> up to 8.5 GPa

High-pressure single-crystal X-ray diffraction measurements of lattice parameters of the compound Li₂VOSiO₄, which crystallises with a natisite-type structure, has been carried out to a pressure of 8.54(5) GPa at room temperature. Unit-cell volume data were fitted with a second-order Birch-Murnaghan EoS (BM-EoS), simultaneously refining V ₀ and K ₀ using the data weighted by the uncertainties in V. The bulk modulus is K ₀ = 99(1) GPa, with K′ fixed to 4. Refinements of third order equations-of-state yielded values of K′ that did not differ significantly from 4. The compressibility of the unit-cell is strongly anisotropic with the c axis (K ₀(c) = 49.7 ± 0.5 GPa) approximately four times more compressible than the a axis (K ₀(a) = 195 ± 3 GPa).     

Tectono-geomorphic development of intra-continental Cenozoic depressions within Cretaceous rocks of the Interior Homocline,Central Arabia

Intra-continental depressions occurred in Central Arabia, within the evaporite-bearing Sulaiy Formation, and extends for over 550 km along N-S arcuate belt, passing through eastern Ar Riyadh, Saudi Arabia. They mark Jurassic/Cretaceous contact within the Interior Homocline of Central Arabia, accommodating Neogene and Quaternary deposits. Two en echelon major depressional areas were discovered, the northern major depressional area and the southern major depressional area. The first depressional area occurs between Al Artawiyah and Ad Dilam towns, following the arcuate Jurassic/Cretaceous contact. It contains five depressions: N-S Al Artwaiyah depression; NW-SE Ath Thumamah depression, northeast of Riyadh; NW-SE Jinadriyah depression, east of Riyadh; E-W Al Kharj depression; and N-S Ad Dilam depression. All five depressions seems to be formed by tectonic and subsequent geomorphic events, except for Al Artawiyah and Jinadriyah depression, which developed mainly by tectonic events. Southern major depressional area steps over to southwest of Ad Dilam, and occurs from Hawtat bani tamim to Layla towns. This Hawtah-Layla major depression trends N-S, and Cretaceous units strike NNE, which is a slightly oblique relationship, suggesting expression of deep-seated structures. Tectonic features were part of the Alpine-Himalayan orogeny, developing during Eocene. They followed by a geomorphic event (karsts and subsequent collapse) that took place during Mid Pleistocene. Ad Dilam depression is a surface expression of three oil and gas fields, while the southern major depression between Hawtat Bani Tamim and Layla towns is a surface expression of four oil and gas fields. Yet, other several depressional areas are also accommodating Quaternary desert sediments, and they contain economic resources, which therefore, worth further detailed studies.     

Experimental and numerical investigation on coal drawing from thick steep seam with longwall top coal caving mining

Steep coal seam mining activities will frequently occur during the next few decades in China. In this study, both experimental and numerical methods are employed to investigate the coal drawing from thick steep seam with longwall top coal caving mining. A series of analyses is performed to investigate the features of the drawing body, the distribution of top coal recovery ratio and the shape of the rock flow under steep conditions. The results indicate that the drawing body of top coal develops prior to upper side of the panel face obviously, and the top coal in the central part of the panel has a higher recovery ratio than that in the lower and upper parts in steep coal seam with caving mining method. The flow paths of the fragmented top coal are nearly straight lines moving towards the drawing window, and the fastest path maintains a constant angle with the plumb line. The spatial shape of the rock flow indicates “bidirectional asymmetry,” which results from the presence of the shield beam and dip angle of the coal seam; thus, this is the root cause of the appearance of the drawing body’s prior development towards the upper side of the panel. The field observation data indicates the same distribution of top coal recovery as that in the physical experiment and numerical simulation. Furthermore, suggested measurements are proposed to improve top coal recovery in steep seam mining based on the engineering practice of Dayuan coal mine.     

Hydrogeochemical Characterization and Groundwater Quality of Jamshedpur Urban Agglomeration in Precambrian Terrain,Eastern India

This paper reports petrography, geochemistry and Rb-Sr age data on the rare metal bearing Neoarchean fertile (Nb-Ta) granite at Allapatna and elucidates its petrogenesis and role in Nb-Ta-Li-Be mineralization. The Allapatna granite (AG) intrudes the Tonalitic-Trondhjemitic - Granodioritic (TTG) Peninsular Gneiss and analysed SiO₂ (72.3-75.6 wt%), K₂O (4.0-5.7wt%), Na2O (3.0-4.4wt%), CaO (0.7-1wt%), MgO (0.13-0.25wt%) and K₂O/Na₂O (>1) indicating evolved nature. The presence of muscovite, biotite and garnet in the mode, peraluminous nature and high initial ⁸⁷Sr/⁸⁶Sr ratio (0.7284±0.0083) attest to their S-type characteristics. Varying Nb/Ta ratio and high Li with moderate abundance of Cs further indicate affinity to Li-Cs-Ta (LCT) type granite-pegmatite system. TheAG showing whole rock Rb-Sr isochron age of 2803± 68 Ma, is the oldest reported fertile granite in India parental to rare metal pegmatites hosting Nb-Ta, Be, and Li resources. Partial melting of a mixed source consisting of both basement TTG rocks and metapelites has generated such type of granitic magma. Fractionation of such granitic magma possibly has given rise to the rare metal (Ta-Nb-Li-Be) bearing pegmatites intruding the nearby schist belt.     

Up-to-date urban rainstorm intensity formulas considering spatial diversity in China

With accelerating urbanization in China, urban waterlogging has had a serious impact on urban sustainable development and citizen welfare. Simple urban rainstorm intensity formulas with a monotonous frequency distribution type cannot meet the practical needs of urban drainage planning and design. This study focuses on the development of urban rainstorm intensity formulas based on spatial diversity in China. Using the annual maximum sampling method, rainstorm data of 607 cities throughout China were collected into a database, with a total of 24,933 rainfall samples (annual observations) under various specified precipitation durations. The database was used to verify that integrating the Pearson III and Gumbel distributions would constitute an optimal theoretical distribution type, owing to its small error and increased fitting precision. Modification and coordination of four important parameters in the rainstorm intensity formula were done using a digital elevation model, which improved the accuracy of the formula. In addition, precipitation distributions in China were treated from the perspective of topographic features to validate the calculations from up-to-date formulas. Accuracy assessment was accomplished using a national code (GB-50014-2006), GIS-based isograms, and authoritative results from the Hydrological Bureau of the Ministry of Water Resources. This work provides a comprehensive foundation for the establishment of an up-to-date rainstorm intensity formula for China, which can be used widely in different cities.