Landslide hazard zonation mapping and comparative analysis of hazard zonation maps

Landslide hazard zonation mapping at regional level of a large area provides a broad trend of landslide potential zones. A macro level landslide hazard zonation for a small area may provide a better insight into the landslide hazards. The main objective of the present work was to carry out macro landslide hazard zonation mapping on 1：50,000 scale in an area where regional level zonation mapping was conducted earlier. In the previous work the regional landslide hazard zonation maps of Srinagar- Rudraprayag area of Garhwal Himalaya in the state of Uttarakhand were prepared using subjective and objective approaches. In the present work the landslide hazard zonation mapping at macro level was carried out in a small area using a Landslide Hazard Evaluation Factor rating scheme. The hazard zonation map produced by using this technique classifies the area into relative hazard classes in which the high hazard zones well correspond with high frequency of landslides. The results of this map when compared with the regional zonation maps prepared earlier show that application of the present technique identified more details of the hazard zones, which are broadly shown in the earlier zonation maps.     

One-Dimensional Consolidation of Sedimented Stowed Pond Ash

Use of fly ash locked in the ash ponds in geotechnical applications such as stowing or backfilling of the mines is an attractive alternative to solve the disposal problem. Before it is used as a stowing or backfilling material, the response of the fly ash?to imposed load must be determined in order to assess its load taking ability. The present study examines the effect of time and incremental load on the consolidation characteristics of the sedimented stowed pond ash using a fixed ring consolidometer. The important parameters, viz. rate of settlement, consolidation coefficients and void ratio, etc. of the hydraulically stowed pond ash collected after 7, 14, 21, 28 and 35?days of stowing under step incremental loads are determined. The study revealed that 60.42–84.87% settlement of the sedimented stowed pond ash takes place in the initial 1?min of the loading. In addition, it is observed that the coefficient of consolidation of the sedimented stowed pond ash, which varies in the range of 0.0195–0.1882?cm²/min, is comparatively low and decreases with the increment of applied load and time. This indicates that the structures lying above the stowed pond ash mass will undergo gradual settling and not suffer large deformation.     

Some studies on solar microwave bursts in relation to the phases of the associated Hα-flares and their spectral nature

Occurrences of the flare-associated microwave bursts as well as their peak flux and energy excess spectra have been examined in relation to the pre- and post-maximum phases of the respective flares during the period 1969–72. Results obtained are: (i) about 76% of the flare-associated bursts occur in the pre-maximum phase and the remaining 24% occurs in the post-maximum phase irrespective of the flare classification, intensity-wise or area-wise; (ii) ‘impulsive’ and ‘gradual rise and fall’ bursts are relatively more important in the pre-maximum phase while ‘post burst increase’ bursts show comparatively higher occurrences in the post-maximum phase; (iii) peak flux and energy excess spectra of the concurrent microwave bursts in the pre-maximum phase of the flare are mostly of ‘inverted U’ and ‘increasing with frequency’ spectral types. Of these, ‘impulsive’ bursts are predominantly of the ‘inverted U’ and the ‘grf’ bursts are of the ‘increasing with frequency’ spectral type.     

Spatio-Temporal Coherence Based Technique for Near-Real Time Sea-Ice Identification from Scatterometer Data

The identification of sea-ice has frequently been cited as one of the most important tasks for deriving the sea-ice parameters and to avoid erroneous retrieval of wind vector over sea-ice infested oceans using space-borne scatterometer data. Discrimination between sea-ice and ocean is ambiguous under the high wind and/or thin/scattered ice conditions. The pre-launch technique developed for Oceansat-2, utilizes the dual-polarized QuikSCAT scatterometer data by using the spatio-temporal coherence properties of sea ice in addition to backscatter coefficient and the Active Polarization Ratio. Results were compared with the operational sea-ice products from National Snow and Ice Data Center. The threshold API value of −0.025 was found optimum for sea-ice and ocean discrimination. The overall sea-ice identification accuracy achieved was of the order of 95 per cent, ranging from 92.5% (during December in Southern Hemisphere) to 98% (during March in Northern Hemisphere). The applicability of the algorithm for both the Arctic as well as Antarctic makes it suitable for its operational use with the Oceansat-2 scatterometer data.     

Ripple marks in intertidal Lower Bhander Sandstone (late Proterozoic), Central India: A morphological analysis

The late Proterozoic, intertidal Lower Bhander Sandstone (Bhander Group, Vindhyan Supergroup) developed around Maihar, central India, is characterized by alternations of sandstone and shale in different scales and shows profuse ripple marks of widely varying morphology. Visual examination of their external morphology led to the identification of wave ripple, current ripple and others of intermediate character.Standard deviation and average of ripple spacing and height of symmetrical and assymmetrical ripples show genetically significant differences analogous to those obtained by Harms (1969) for wave- and current-generated ripples. Different dimensionless parameters, e.g., R.I., R.S.I., S.I., etc., processed separately for the two types of ripples, show a wide variation in their range which encompasses the total spectrum of values stipulated for wave and current ripples. However, the frequency of any particular genetic type of ripple differs widely when analysed in terms of different dimensionless parameters. Several scatter plots, prepared after Tanner (1967) also indicate the presence of various genetic types of ripples, but there are ripples for which results remain inconclusive. Furthermore, scatter plots involving the vertical form index (ripple length/ripple height) and median grain size of a few asymmetrical ripples, following Reineck and Wunderlich (1968a), led to the discrimination between current ripple and wave ripple and the distinction is grossly consistent with the results obtained by other means.Ripple spacing, ripple index and grain-size data of a few representative samples of ripples of possible wave origin, analysed after Tanner (1971) and Allen (1979) indicate that they were generated in a shallow basin with restricted fetch.Internally, the ripples, irrespective of their symmetry, are often characterized by unidirectional bundles of foresets consisting of rhythmically alternating sand and mud laminae. The sets of cross-laminae may be complexly organized with planar or curved erosional boundaries separating them. In many instances internal structures typical of wave ripples are also noted.Inconsistencies, however, exist between the results obtained by application of different criteria in interpretation of these ripple marks. The limitations in applicability of     

The First Recorded Occurrences and the Distribution of Physalia physalis (Hydrozoa: Physaliidae) in Algerian Waters

Ocean Science Journal - Recently, there have been recorded findings of the pleustonic siphonophore Physalia physalis Linnæus, 1758, in different regions of Algeria. Several colonies washed...     

Petrogenesis of low-δ<Superscript>18</Superscript>O quartz porphyry dykes,Koegel Fontein complex,South Africa

This paper investigates the origin of low-δ¹⁸O quartz porphyry dykes associated with the 144–133 Ma Koegel Fontein Igneous Complex, which was intruded during the initial phase of breakup of Africa and South America. The 25-km diameter Rietpoort Granite is the largest and youngest phase of activity, and is roofed by a 10-km diameter pendant of gneiss. Quartz porphyry (QP) dykes, up to 15 m in width, strike NW–SE across the complex. The QP dykes that intruded outside the granite have similar quartz phenocryst δ¹⁸O values (average 8.0‰, ± 0.7, n?=?33) to the granite (average 8.3?±?1.0, n?=?7). The QP dykes that intruded the roof pendant have quartz phenocrysts with more variable δ¹⁸O values (average 1.6‰, ± 2.1, n?=?55). In some cases quartz phenocrysts have δ¹⁸O values as low as ? 2.5‰. The variation in δ¹⁸O value within the quartz crystal population of individual dykes is small relative to the overall range, and core and rim material from individual quartz phenocrysts in three samples are identical within error. There is no evidence that quartz phenocryst δ¹⁸O values have been affected by fluid–rock interaction. Based on a ?_quartz?magma value of 0.6‰, magma δ¹⁸O values must have been as low as ? 3.1‰. Samples collected along the length of the two main QP dykes that traverse the roof pendant have quartz phenocryst δ¹⁸O values that range from +?1.1 to +?4.6‰, and ? 2.3 to +?5.6‰, respectively. These δ¹⁸O values correlate negatively (r = ? 0.96) with initial ⁸⁷Sr/⁸⁶Sr, which can be explained by the event that lowered δ¹⁸O values of the source being older than the dykes. We suggest that the QP dykes were fed by magma produced by partial melting of gneiss, which had been variably altered at high temperature by ¹⁸O-depleted meteoric water during global glaciation at ~?550 Ma. The early melts had variable δ¹⁸O value but as melt pockets interconnected during melting, the δ¹⁸O values approached that of average gneiss. Variable quartz phenocryst δ¹⁸O values in the same dyke can be explained by vertical emplacement, at variable rates of ascent along the dyke. The lateral variation in quartz, and hence magma δ¹⁸O value at a particular point along a single dyke would depend on the rate of ascent of magma at that point along the dyke, and the ‘age’ of the particular magma batch.     

Hydrogeological characterization of aquifer in palla flood plain of Delhi using integrated approach

The Yamuna flood plains spread across the northern part of Indian subcontinent is home to millions of people. The ever-growing population in these plains make it difficult to sustain the demand of freshwater resources. However, the productive aquifers of flood plains could provide solution for these issues. In this context, it is necessary to understand the aquifer characteristics. Thus, the paper attempts to characterize the aquifer in Palla area of the flood plain using integrated approach. Besides, grain size analysis and site-litholog study, the nature of aquifer material was also ascertained from bulk mineralogy of the sediments using X-Ray Diffraction. The aquifer parameters were estimated with help of long duration pumping test data. Moreover, the effect of pumping on salinity variation and hydrochemical facies evolution was also examined. The sand dominant, unconfined aquifer was estimated to have horizontal hydraulic conductivity in the range of 25 m/day and vertical hydraulic conductivity of 6–7 m /day. While the specific yield of the aquifer was estimated in the range of 0.07–0.08. It is observed that under conducive active flood plain environment, the given sand mineralogy at the site does not allow salinity increase in groundwater even after more than a decade of groundwater pumping. In fact, over years, hydrochemical facies have evolved towards Bicarbonate type. These things put together make the active flood plain aquifer a sustainable groundwater resource.