Evolution of anthropogenic and biomass burning emissions of air pollutants at global and regional scales during the 1980�C2010 period

Several different inventories of global and regional anthropogenic and biomass burning emissions are assessed for the 1980?C2010 period. The species considered in this study are carbon monoxide, nitrogen oxides, sulfur dioxide and black carbon. The inventories considered include the ACCMIP historical emissions developed in support of the simulations for the IPCC AR5 assessment. Emissions for 2005 and 2010 from the Representative Concentration Pathways (RCPs) are also included. Large discrepancies between the global and regional emissions are identified, which shows that there is still no consensus on the best estimates for surface emissions of atmospheric compounds. At the global scale, anthropogenic emissions of CO, NO_x and SO₂ show the best agreement for most years, although agreement does not necessarily mean that uncertainty is low. The agreement is low for BC emissions, particularly in the period prior to 2000. The best consensus is for NO_x emissions for all periods and all regions, except for China, where emissions in 1980 and 1990 need to be better defined. Emissions of CO need better quantification in the USA and India for all periods; in Central Europe, the evolution of emissions during the past two decades needs to be better determined. The agreement between the different SO₂ emissions datasets is rather good for the USA, but better quantification is needed elsewhere, particularly for Central Europe, India and China. The comparisons performed in this study show that the use of RCP8.5 for the extension of the ACCMIP inventory beyond 2000 is reasonable, until more global or regional estimates become available. Concerning biomass burning emissions, most inventories agree within 50?C80%, depending on the year and season. The large differences between biomass burning inventories are due to differences in the estimates of burned areas from the different available products, as well as in the amount of biomass burned.     

Mise en évidence d'un nouveau front de chevauchement dans l'Atlas tunisien oriental de Tunisie par sismique réflexion. Contexte structural régional et rôle du Trias salifère

Structural interpretations of newly acquired seismic lines in northeastern Tunisia allow us to highlight a new thrust front for the Atlasic range of Tunisia, in contrast to the previously Zaghouan fault thrust Dorsale zone. This new thrust front takes place on weakness tectonic zones, materialized by inherited faults anchored on the pre-Triassic basement. This front seems to be a paleogeographic trend controlling structural style and basin fill with a synsedimentary activity. The front is expressed by reverse faults, thrust faults, back thrusting, and decollement structures. To cite this article: S. Khomsi et al., C. R. Geoscience 336 (2004).     

Three-parameter Radon transform in layered transversely isotropic media

Radon transform is a powerful tool with many applications in different stages of seismic data processing, because of its capability to focus seismic events in the transform domain. Three-parameter Radon transform can optimally focus and separate different seismic events, if its basis functions accurately match the events. In anisotropic media, the conventional hyperbolic or shifted hyperbolic basis functions lose their accuracy and cannot preserve data fidelity, especially at large offsets. To address this issue, we propose an accurate traveltime approximation for transversely isotropic media with vertical symmetry axis, and derive two versions of Radon basis functions, time-variant and time-invariant. A time-variant basis function can be used in time domain Radon transform algorithms while a time-invariant version can be used in, generally more efficient, frequency domain algorithms. Comparing the time-variant and time-invariant Radon transform by the proposed basis functions, the time-invariant version can better focus different seismic events; it is also more accurate, especially in presence of vertical heterogeneity. However, the proposed time-invariant basis functions are suitable for a specific type of layered anisotropic media, known as factorized media. We test the proposed methods and illustrate successful applications of them for trace interpolation and coherent noise attenuation.     

A proposal for a new scenario framework to support research and assessment in different climate research communities

In this paper, we propose a scenario framework that could provide a scenario “thread” through the different climate research communities (climate change – vulnerability, impact, and adaptation - and mitigation) in order to support assessment of mitigation and adaptation strategies and climate impacts. The scenario framework is organized around a matrix with two main axes: radiative forcing levels and socio-economic conditions. The radiative forcing levels (and the associated climate signal) are described by the new Representative Concentration Pathways. The second axis, socio-economic developments comprises elements that affect the capacity for mitigation and adaptation, as well as the exposure to climate impacts. The proposed scenarios derived from this framework are limited in number, allow for comparison across various mitigation and adaptation levels, address a range of vulnerability characteristics, provide information across climate forcing and vulnerability states and span a full century time scale. Assessments based on the proposed scenario framework would strengthen cooperation between integrated-assessment modelers, climate modelers and vulnerability, impact and adaptation researchers, and most importantly, facilitate the development of more consistent and comparable research within and across these research communities.     

Measurement of the radius of Mercury by radio occultation during the MESSENGER flybys

The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft completed three flybys of Mercury in 2008–2009. During the first and third of those flybys, MESSENGER passed behind the planet from the perspective of Earth, occulting the radio-frequency (RF) transmissions. The occultation start and end times, recovered with 0.1 s accuracy or better by fitting edge-diffraction patterns to the RF power history, are used to estimate Mercury's radius at the tangent point of the RF path. To relate the measured radius to the planet shape, we evaluate local topography using images to identify the high-elevation feature that defines the RF path or using altimeter data to quantify surface roughness. Radius measurements are accurate to 150 m, and uncertainty in the average radius of the surrounding terrain, after adjustments are made from the local high at the tangent point of the RF path, is 350 m. The results are consistent with Mercury's equatorial shape as inferred from observations by the Mercury Laser Altimeter and ground-based radar. The three independent estimates of radius from occultation events collectively yield a mean radius for Mercury of 2439.2±0.5 km.     

Denoising and improving the quality of seismic data using combination of DBM filter and FX deconvolution

Seismic data denoising, random noise attenuation (RNA) and spike-like noise suppression, is a main consideration for improving the quality of records. RNA could increase signal to noise ratio (S/N) to avoid misinterpretation of seismic data. In this research, a novel method is created by using the combination of frequency-offset deconvolution (FXD) and decision-based median (DBM) filter for RNA from seismic data. The method is applied in two main phases; FXD is focused to remove the Gaussian noise and DBM filter is focused to attenuate the impulsive noise and spikes. To implement and verify the method, three types of data are used: two synthetic models (a model with linear events and a model with hyperbolic events) and an observed seismic section. The ability of the proposed method (FXD-DBM) in comparison of applying each in seismic RNA application is proven. The noise level is reduced obviously, and hence, the S/N of all examined seismic records is increased considerably after denoising by the combination of FX deconvolution and DBM filter. About the real seismic section, suppressing random noise and spikes show up improving the seismic reflector continuity and hence enhancing the interpretability of data. Moreover, some masked events by random noise are clarified in different parts of data after denoising using the planned method.     

Spatial assessment of forest cover and land-use changes in the Hindu-Kush mountain ranges of northern Pakistan

Anthropogenic activities and natural processes are continuously altering the mountainous environment through deforestation, forest degradation and other land-use changes. It is highly important to assess, monitor and forecast forest cover and other land-use changes for the protection and conservation of mountainous environment. The present study deals with the assessment of forest cover and other land-use changes in the mountain ranges of Dir Kohistan in northern Pakistan, using high resolution multi-temporal SPOT-5 satellite images. The SPOT-5 satellite images of years 2004, 2007, 2010 and 2013 were acquired and classified into land-cover units. In addition, forest cover and land-use change detection map was developed using the classified maps of 2004 and 2013. The classified maps were verified through random field samples and Google Earth imagery (Quick birds and SPOT-5). The results showed that during the period 2004 to 2013 the area of forest land decreased by 6.4%, however, area of range land and agriculture land have increased by 22.1% and 2.9%, respectively. Similarly, barren land increased by 1.1%, whereas, area of snow cover/glacier is significantly decreased by 21.3%. The findings from the study will be useful for forestry and landscape planning and can be utilized by the local, provincial and national forest departments; and REDD+ policy makers in Pakistan.     

Better air for better health: Forging synergies in policies for energy access,climate change and air pollution

Air pollution and its related health impacts are a global concern. This paper addresses how current policies on air pollution, climate change and access to clean cooking fuels can effectively reduce both outdoor and household air pollution and improve human health. A state of the art modeling framework is used that combines an integrated assessment model and an atmospheric model to estimate the spatial extent and distribution of outdoor air pollution exposures. Estimates of household energy access and use are modeled by accounting for heterogeneous household energy choices and affordability constraints for rural and urban populations spanning the entire income distribution. Results are presented for 2030 for a set of policy scenarios on air pollution, climate change and energy access and include spatially explicit emissions of air pollutants; ambient concentrations of PM2.5; and health impacts in terms of disability adjusted life years (DALYs) from both ambient and household air pollution. The results stress the importance of enforcing current worldwide air quality legislation in addressing the impacts of outdoor air pollution. A combination of stringent policies on outdoor air pollution, climate change and access to clean cooking fuels is found to be effective in achieving reductions in average ambient PM2.5 exposures to below World Health Organization recommended levels for a majority of the world's population and results in a significant decline in the global burden of disease from both outdoor and household air pollution.     

Three-dimensional image of the Moho undulations beneath the Gulf of Bothnia using wide-angle seismic data

The BABEL marine seismic experiment has been carried out to investigate the lithospheric structure and antecedent tectonic signatures of the Baltic Shield, including the Archaean-Proterozoic collisional structure in the northern part of the Gulf of Bothnia.
Lithospheric seismic-reflection streamer data and simultaneously recorded wide-angle reflection and refraction data collected in the Gulf of Bothnia as part of the BABEL project have been used for 3-D modelling. The distribution of land stations around the Gulf provides a good 3-D ray coverage of the PMP reflection data recorded at the eight stations in the area and allows an estimation of strikes and dips of the Moho boundary in the area. The traveltimes of reflected phases are calculated using a method that utilizes the finite-difference solution of the eikonal equation. The Moho wide-angle-reflection (PMP) traveltimes are modelled using an inversion method. A 2-D model from the Gulf of Bothnia extended into the third dimension is used as an initial model. During the inversion the velocity is kept constant and only the Moho boundary is allowed to vary. To estimate the strike of the Moho boundary and the stability of the inversion, two initial models with different strikes are examined.
The results indicate that the Moho depth in the Gulf of Bothnia undulates and has a maximum depth of 55 km in the south, rising to 42 km in the north. The Moho depth variations seem to be step-like. This change in the Moho depth coincides with the location of the presumed fossil subduction zone in the area. The crustal-thickness variations seem to be well approximated by a nearly 2-D structure striking parallel to a postulated subduction zone immediately to the south of the Skellefte area. The presence of the step at the crust/mantle boundary can be interpreted as a result of a plate-collision event at about 2 Ga.