Extensive photometric study of V471 Tauri

The white-dwarf red-dwarf eclipsing binary V471 Tauri has been observed photoelectrically, in blue and yellow lights, from 1985 to 1989. The behaviour of the mean brightness variation has been re-examined. The mean brightness has decreased from 1982 to 1985 and thereafter it started to increase again. The amount of the variation of the light of the system has reached to 0.19 mag in both colours since 1973. On the other hand, the new timings of mid-eclipse deviate considerably from those linear and light-time effect fittings. Neither the third-body hypothesis, nor any other mechanism can explain the orbital period change of the system.     

A comparison of landslide susceptibility mapping of the eastern part of the North Anatolian Fault Zone (Turkey) by likelihood-frequency ratio and analytic hierarchy process methods

The North Anatolian Fault is known as one of the most active and destructive fault zones which produced many earthquakes with high magnitudes both in historical and instrumental periods. Along this fault zone, the morphology and the lithological features are prone to landslides. Kuzulu landslide, which is located near the North Anatolian Fault Zone, was triggered by snow melting without any precursor, occurred on March 17, 2005. The landslide resulted in 15 deaths and the destruction of about 30 houses at Kuzulu village. There is still a great danger of further landslides in the region. Therefore, it is vitally important to present its environmental impacts and prepare a landslide susceptibility map of the region. In this study, we used likelihood-frequency ratio model and analytical hierarchy process (AHP) to produce landslide susceptibility maps. For this purpose, a detailed landslide inventory map was prepared and the factors chosen that influence landslide occurrence were: lithology, slope gradient, slope aspect, topographical elevation, distance to stream, distance to roads, distance to faults, drainage density and fault density. The ArcGIS package was used to evaluate and analyze all the collected data. At the end of the susceptibility assessment, the area was divided into five susceptibility regions, such as very low, low, moderate, high and very high. The results of the analyses were then verified using the landslide location data and compared with the probability model. For this purpose, an area under curvature (AUC) and the seed cell area index assessments were applied. An AUC value for the likelihood-frequency ratio-based model 0.78 was obtained, whereas the AUC value for the AHP-based model was 0.64. The landslide susceptibility map will help decision makers in site selection and the site-planning process. The map may also be accepted as a basis for landslide risk-management studies to be applied in the study area.     

Geochemical make-up of oceanic peridotites from NW Turkey and the multi-stage melting history of the Tethyan upper mantle

We present the whole-rock and the mineral chemical data for upper mantle peridotites from the Harmanc?k region in NW Turkey and discuss their petrogenetic–tectonic origin. These peridotites are part of a Tethyan ophiolite belt occurring along the ?zmir-Ankara-Ercincan suture zone in northern Turkey, and include depleted lherzolites and refractory harzburgites. The Al₂O₃ contents in orthopyroxene and clinopyroxene from the depleted lherzolite are high, and the Cr-number in the coexisting spinel is low falling within the abyssal field. However, the orthopyroxene and clinopyroxene in the harzburgites have lower Al₂O₃ contents for a given Cr-number of spinel, and plot within the lower end of the abyssal field. The whole-rock geochemical and the mineral chemistry data imply that the Harmanc?k peridotites formed by different degrees of partial melting (~%10–27) of the mantle. The depleted lherzolite samples have higher MREE and HREE abundances than the harzburgitic peridotites, showing convex-downward patterns. These peridotites represent up to ~16 % melting residue that formed during the initial seafloor spreading stage of the Northern Neotethys. On the other hand, the more refractory harzburgites represent residues after ~4–11 % hydrous partial melting of the previously depleted MOR mantle, which was metasomatized by slab-derived fluids during the early stages of subduction. The Harmanc?k peridotites, hence, represent the fragments of upper mantle rocks that formed during different stages of the tectonic evolution of the Tethyan oceanic lithosphere in Northern Neotethys. We infer that the multi-stage melting history of the Harmanc?k peridotites reflect the geochemically heterogeneous character of the Tethyan oceanic lithosphere currently exposed along the ?zmir-Ankara-Erzincan suture zone.     

Coexistence of abyssal and ultra-depleted SSZ type mantle peridotites in a Neo-Tethyan Ophiolite in SW Turkey: Constraints from mineral composition,whole-rock geochemistry (major–trace–REE–PGE), and Re–Os isotope systematics

We present new, whole-rock major and trace element chemistry, including rare earth elements (REE), platinum-group elements (PGE), and Re–Os isotope data from the upper mantle peridotites of a Cretaceous Neo-Tethyan ophiolite in the Mu?la area in SW Turkey. We also report extensive mineral chemistry data for these peridotites in order to better constrain their petrogenesis and tectonic environment of formation. The Mu?la peridotites consist mainly of cpx-harzburgite, depleted harzburgite, and dunite. Cpx-harzburgites are characterized by their higher average CaO (2.27 wt.%), Al₂O₃ (2.07 wt.%), REE (53 ppb), and ¹⁸⁷Os/¹⁸⁸Os_(i) ratios varying between 0.12497 and 0.12858. They contain Al-rich pyroxene with lower Cr content of coexisting spinel (Cr# = 13–22). In contrast, the depleted harzburgites and dunites are characterized by their lower average CaO (0.58 wt.%), Al₂O₃ (0.42 wt.%), and REE (1.24 ppb) values. Their clinopyroxenes are Al-poor and coexist with high-Cr spinel (Cr# = 33–83). The ¹⁸⁷Os/¹⁸⁸Os_(i) ratios are in the range of 0.12078–0.12588 and are more unradiogenic compared to those of the cpx-harzburgites.Mineral chemistry and whole rock trace and PGE data indicate that formation of the Mu?la peridotites cannot be explained by a single stage melting event; at least two-stages of melting and refertilization processes are needed to explain their geochemical characteristics. Trace element compositions of the cpx-harzburgites can be modeled by up to ~ 10–16% closed-system dynamic melting of a primitive mantle source, whereas those of the depleted harzburgites and dunites can be reproduced by ~ 10–16% open-system melting of an already depleted (~ 16%) mantle. These models indicate that the cpx-harzburgites are the products of first-stage melting and low-degrees of melt–rock interaction that occurred in a mid-ocean ridge (MOR) environment. However, the depleted harzburgites and dunites are the product of second-stage melting and related refertilization which took place in a supra subduction zone (SSZ) environment. The Re–Os isotope systematics of the Mu?la peridotites gives model age clusters of ~ 250 Ma, ~ 400 Ma and ~ 750 Ma that may record major tectonic events associated with the geodynamic evolution of the Neo-Tethyan, Rheic, and Proto-Tethyan oceans, respectively. Furthermore, > 1000 Ma model ages can be interpreted as a result of an ancient melting event before the Proto-Tethys evolution.     

Determination of deterioration of the main facade of the Ferit Paşa Cistern by non-destructive techniques (Konya,Turkey)

Building stones have long been one of the most widely used construction materials in the world. Building stones used in historical monuments are deteriorated partly or completely depending on the environmental and atmospheric effects. In recent years, non-destructive test methods have been used to assess deterioration of building stones used in historical monuments. Gödene stone is one of the building stones being widely used in the historical buildings in the Konya region, Central Anatolia. The most deterioration effects are observed in the Ferit Pa?a Cistern among the historical structures built with Gödene stone in the region. The aim of this study is to assess the deteriorating effects in the street façade of the Ferit Pa?a Cistern via non-destructive testing methods (Schmidt hardness rebound value, P-wave velocity, humidity measurement and thermal imaging) and create maps of deteriorated features. Turkey’s historic places are integrated to Turkish culture, efforts are made to conserve heritage through rehabilitation. Therefore, this study will help developers and federal managers during the project planning stage by providing technical data.     

Comparison of Extraction Procedures for Assessing Soil Metal Bioavailability of to Wheat Grains

Agricultural soils have been analyzed to elucidate whether the trace metal distribution changes in relation to agricultural activities and to predict environmental risk. In addition to the extractability of Cu, Mn, Ni, Pb, and Zn in soils was compared by single extraction (hydrochloric acid (HCl), ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA), calcium chloride (CaCl₂), water (H₂O)), and sequential extraction procedures. The modified Community Bureau of Reference (BCR) sequential extraction procedure (three‐step) used to extraction of metals in soil samples. The extraction capacity of the analyzed metals was found by using single extraction procedures in the order: HCl > EDTA > DTPA > CaCl₂ > H₂O. A single correlation analysis was used to investigate the relationship between extractable metal concentrations in soil solutions and metal accumulation in wheat grains. Simple correlation analyses indicated that the extractable Pb and Ni of soils by HCl, EDTA, and DTPA single extraction procedures were significantly correlated with the metal contents of wheat grains. For CaCl₂, H₂O, and BCR extraction procedures there was a relatively poor correlation between the extractable Cu, Mn, Ni, Pb, and Zn of soils and metal contents of wheat grains.     

Factors controlling the morphological evolution of the Çanakkale Strait (Dardanelles, Turkey)

Seismic profiling, bathymetric and physical oceanographic data collected from the Çanakkale Strait revealed that the morphological evolution of the strait has been controlled by tectonic activity, and sediment erosion and deposition. Sediments in the strait have been sourced mostly by rivers draining the Biga Peninsula during lowstand periods. In highstand periods, by contrast, deposits in the strait were reworked by currents. The seafloor morphology of the Çanakkale Strait is also controlled by a sequence of factors ranging from tectonics to current erosion and deposition. Channel deposits overlying the basement are being eroded at the narrower, meandering central section of the strait (the Nara Passage) due to high current velocities. The eroded sediments are deposited in the relatively linear and wider, northern and southern sectors of the strait exposed to low current velocities. As a result, the high-energy areas are more deeply incised due to the erosion, whereas deposition elevates the seafloor in the areas exposed to lower current energy. Three strike-slip faults, which possibly relate to the activity of the North Anatolian Fault Zone, are responsible for the irregular shape of the strait and this, in turn, controls the current velocity along the strait. The high-energy conditions probably commenced with the latest invasion of Mediterranean waters some 12 ka b.p., and have continued as a two-layered current system to the present day.     

Effects of viscous dissipation and free convection currents on the flow of an electrically conducting fluid past an accelerated vertical porous plate

In the present paper, the effects of free convection currents and the viscous dissipation on the unsteady flow of an electrically conducting and viscous incompressible fluid around an uniformly accelerated vertical porous plate subjected to a suction or injection velocity inversely proportional to the square root of time, in presence of a transverse magnetic field, have been investigated. Analytical solutions for the velocity and the temperature distributions, the skin-friction and the rate of heat transfer are obtained for small magnetic parameterM. During the course of discussion the effects of the Grashof number Gr, the Eckert number Ec, the suction/injection parametera have been considered for unit value of the Prandtl number Pr.Nomenclature a suction/injection parameter - C _p specific heat at constant pressure - B ₀ magnetic induction - g acceleration due to gravity - Gr Grashof number (g(T _w –T )/U ₀ ³ ) - K thermal conductivity - M magnetic field parameter (B ₀ ² /U ₀ ² ) - Pr Prandtl number (C _p/K) - T temperature of the fluid near the plate - T _w temperature of the plate - T temperature of the fluid at infinity - t time - t dimensionless time (tU ₀ ² /) - u velocity of the fluid - u non-dimensional velocity (u/U ₀) - U velocity of the plate - U dimensionless velocity of the plate (U/U ₀) - U ₀ reference velocity - v ₀ suction velocity - v ₀ non-dimensional suction velocity (v ₀/U ₀)=at ^–1/2 - Ec Eckert number ((U ₀)^2/3/C _p(T _w –T )) - T dimensionless temperature of the fluid near the plate ((T–T )/(T _w ^–T )) - x, y coordinates along and normal to the plate - x, y dimensionless coordinates (y=yU ₀/) - kinematic viscosity - coefficient of volume expansion - electric conductivity of the fluid - y/2t ^1/2 - density of the fluid - skin-friction - dimensionless skin-friction - q rate of heat transfer - q non-dimensional rate of heat transfer - coefficient of viscosity - _e magnetic permeability On leave of absence from Department of Mathematics, University of Dhaka, Bangladesh     

Die wissenschaftlichen Probleme,welche durch die wirtschaftliche Verwertung des Donaudeltas hervorgerufen werden

Ohne Zusammenfassung     

Advanced Lake Shoreline Extraction Approach by Integration of SAR Image and LIDAR Data

Noise and an abnormal distributed-image histogram is the main challenge of using SAR data. From this point of view, this study’s authors motivated the non-use of user-defined input parameters. To achieve this purpose, a fuzzy approach was proposed to extract shoreline from SENTINEL-1A data. The parameters in the processing of the SENTINEL-1A image were generated automatically with LIDAR-intensity-derived object-based segmentation results. The LIDAR-intensity image was segmented with the Mean-shift method. The corresponding result was used to estimate the input parameters for fuzzy clustering of the SENTINEL-1A image. Fuzzy segmentation was proposed, due to the expected large number of values regarding water and land classes except for the pixels along the shoreline. The memberships for land and water classes were separately computed. In the proposed approach, the results from LIDAR and SENTINEL-1A dataset are promising, with differences below 1 pixel (10?m) by evaluation with the used reference vector data.