The Skien lavas, Oslo Rift: petrological disequilibrium and geochemical evolution

The Skien lavas, which form the earliest phase of basaltic magmatism within the Permo-Carboniferous Oslo Rift, contain multiple generations of clinopyroxene which exhibit strong petrological and geochemical disequilibrium. Three principal core compositions have been identified: (1) low-jadeite, high-Mg, Cr-diopside cores (CrMgDi) with strongly depleted trace-element signatures, which are believed to be xenocrystic in origin; (2) Mg-rich, Cr-poor diopside cores (MgDi) with moderately depleted trace-element signatures which probably represent early cognate growth; and (3) more dominant, low-Mg, phenocrystic diopside cores (PhenDi). Several samples contain CrMgDi or MgDi cores which have been subjected to resorption and partial re-equilibration with their host melts, indicative of extensive disequilibrium and magma mixing. These three core types are overgrown by trace-element-enriched Ti-augite, which also forms megacrysts and late-stage lava groundmass. Calculated Ti-augite/melt partition coefficients show clinopyroxene compatibility of the M-HREE, Zr, Hf and Y. The LILE, Sr, and Nb remain incompatible. )Sr₃₀₀ and )Nd₃₀₀ of Ti-augite overgrowths, phenocrystic diopside, and MgDi diopside cores show that intrasample isotopic disequilibrium existed when the host basalts were erupted. All epsilon values lie within the range of data previously published for the Skien lavas. Detailed examination of the chemical, isotopic and textural disequilibrium features seen in these lavas has enabled us to place constraints upon the magmatic evolution of this basalt suite, ranging from xenocryst incorporation to cognate multistage pyroxene growth, as well as identifying clear evidence of magma mixing and possible crustal contamination.     

Restoration of submerged vegetation in shallow eutrophic lakes – A guideline and state of the art in Germany

One of the most serious problems caused by eutrophication of shallow lakes is the disappearance of submerged macrophytes and the switch to a turbid, phytoplankton-dominated state. The reduction of external nutrient loads often does not result in a change back to the macrophyte-dominated state because stabilising mechanisms that cause resilience may delay a response. Additional internal lake restoration measures may therefore be needed to decrease the concentration of total phosphorus and increase water clarity. The re-establishment of submerged macrophytes required for a long-term stability of clear water conditions, however, may still fail, or mass developments of tall-growing species may cause nuisance for recreational use. Both cases are often not taken into account when restoration measures are planned in Germany, and existing schemes to reduce eutrophication consider the topic inadequately. Here we develop a step-by-step guideline to assess the chances of submerged macrophyte re-establishment in shallow lakes. We reviewed and rated the existing literature and case studies with special regard on (1) the impact of different internal lake restoration methods on the development of submerged macrophytes, (2) methods for the assessment of natural re-establishment, (3) requirements and methods for artificial support of submerged macrophyte development and (4) management options of macrophyte species diversity and abundance in Germany. This guideline is intended to help lake managers aiming to restore shallow lakes in Germany to critically asses and predict the potential development of submerged vegetation, taking into account the complex factors and interrelations that determine their occurrence, abundance and diversity.     

Significance of vertical flux as a sink for surface water DMSP and as a source for the sediment surface in coastal zones of northern Europe

In April 1997 and 1998 the significance of sedimentation as a sink for epipelagic dimethylsulphoniopropionate (DMSP) production and as a source for marine sediments was reassessed using a newly designed sediment trap. The behaviour of the traps in immersion was monitored continuously and the collection efficiency was evaluated with ²³⁴Th measurements. Net DMS(P) fluxes were corrected for some physical and biological losses during the whole sedimentation process providing reliable estimates of gross DMSP fluxes. It is shown that daily losses by sedimentation account for between 0.1% and 16% of seawater particulate DMSP (DMSPp) standing stocks, and between 3% and 75% of daily DMSPp production. In the Malangen fjord we observed temporal increases of DMSP production and standing stocks which resulted also in increases of DMSP vertical fluxes and DMS(P) concentrations at the sediment surface. This result illustrates how tight the coupling can be between pelagos and benthos, and confirms that DMS(P) concentration in the sediment was a reliable diagnostic indicator of vertical export from overlying waters in Malangen fjord. In Ullsfjord, however, DMS(P) concentrations in the sediment were poorly indicators of Phaeocystis pouchetii export during the early stage of growth of a bloom. The high load of DMS(P) in Balsfjord's sediments could neither be attributed to local vertical sedimentation nor to short-term lateral advection of fresh DMSP-containing phytoplanktonic material, and provides indication that this tracer sometimes also can be misleading. The highest loads of DMS(P) in sediments and the fastest rates of sedimentation occurred in the Southern Bight of the North Sea.     

Origin of nickel in water solution of the chalk aquifer in the north of France and influence of geochemical factors

In the north of France, high registers of nickel are sometimes recorded within the chalk aquifer. In a confined context, the presence of pyrite in the covering clays or in the marcasite nodules encrusted in the clay may constitute a natural source of trace metals. With an objective of sanitary control, the limits of chemical contents regulating the quality of water destined for human consumption have been lowered by the European Framework Directive in the field of water policy (2000/60/EC). As a result, nickel limits have been reduced from 50 to 20 μg/l. The analyses, carried out on three water catchment fields in our area of study, were centred on variable parameters (Eh, O₂(d), pH, Conductivity, T°), major elements (SO₄, NO₃) and metals (Fe, Ni, Mn, Co). The acquired data enabled us to identify from one hand, the conditions which are presented within the site, special thanks to the evolution of nitrate and iron contents and on the other hand, the natural origin (geological) of nickel for two of the three sites studied based essentially on the evaluation of the Nickel/Cobalt ratio. Thus, on the first site, the evolution of nickel content and nitrate content showed the influence of the phenomenon of denitrification on the re-mobilisation of the nickel. Whereas on the second site, a high variation of total iron content and oxygen dissolved in solution highlighted a particular phenomenon of oxidation of the pyrite through molecular oxygen. Finally, the correlation with the sulphates clearly showed behaviour of the nickel, once released, that was entirely dependent on the phenomenon of adsorption on the iron and manganese hydroxides.     

Options to overcome the barriers to pricing European agricultural emissions

Although agriculture could contribute substantially to European emission reductions, its mitigation potential lies untapped and dormant. Market-based instruments could be pivotal in incentivizing cost-effective abatement. However, sector specificities in transaction costs, leakage risks and distributional impacts impede its implementation. The significance of such barriers critically hinges on the dimensions of policy design. This article synthesizes the work on emissions pricing in agriculture together with the literature on the design of market-based instruments. To structure the discussion, an options space is suggested to map policy options, focusing on three key dimensions of policy design. More specifically, it examines the role of policy coverage, instruments and transfers to farmers in overcoming the barriers. First, the results show that a significant proportion of agricultural emissions and mitigation potential could be covered by a policy targeting large farms and few emission sources, thereby reducing transaction costs. Second, whether an instrument is voluntary or mandatory influences distributional outcomes and leakage. Voluntary instruments can mitigate distributional concerns and leakage risks but can lead to subsidy lock-in and carbon price distortion. Third, the impact on transfers resulting from the interaction of the Common Agricultural Policy (CAP) with emissions pricing will play a key role in shaping political feasibility and has so far been underappreciated.

POLICY RELEVANCE

Following the 2015 Paris Agreement, European climate policy is at a crossroads. Achieving cost-effectively the 2030 and 2050 European targets requires all sectors to reduce their emissions. Yet, the cornerstone of European climate policy, the European Union Emissions Trading System (EU ETS), covers only about half of European emissions. Major sectors have been so far largely exempted from carbon pricing, in particular transport and agriculture. While transport has been increasingly under the spotlight as a possible candidate for an EU ETS sectoral expansion, policy discussions on pricing agricultural emissions have been virtually absent. This article attempts to fill this gap by investigating options for market-based instruments to reduce agricultural emissions while taking barriers to implementation into account.     

Global change and the biogeochemistry of the North Sea: the possible role of phytoplankton and phytoplankton grazing

Phytoplankton plays a dominant role in shelf biogeochemistry by producing the major part of organic matter. Part of the organic matter will reach the sediment where diagenetic processes like denitrification, apatite formation or burial will remove nutrients from the biogeochemical cycle. In this article current knowledge on the decadal plankton variability in the North Sea is summarized and possible implications of these changes for the biogeochemistry of the North Sea are discussed. Most of the observed interdecadal dynamics seem to be linked to large-scale oceanographic and atmospheric processes. Prominent changes in the North Sea ecosystem have taken place around 1979 and 1988. In general, the phytoplankton color (CPRS indicator of phytoplankton biomass) reached minimum values during the end of the 1970s and has increased especially since the mid 1980s. Changes with a similar timing have been identified in many time series from the North Sea through the entire ecosystem and are sometimes referred to as regime shifts. It is suggested that the impact of global change on the local biogeochemistry is largely driven by the phyto- and zooplankton dynamics during spring and early summer. At that time the extent of zooplankton–phytoplankton interaction either allows that a large part of the new production is settling to the sediment, or that a significant part of the new production including the fixed nutrients is kept within the pelagic system. The origin of the extent of the phytoplankton–zooplankton interaction in spring is probably set in the previous autumn and winter. In coastal areas, both large-scale atmospheric and oceanographic changes as well as anthropogenic factors influence the long-term dynamics. Due to eutrophication, local primary production nowadays still is up to five times higher than during pre-industrial conditions, despite a decreasing trend. Recently, introduced species have strengthened the filter feeder component of coastal ecosystems. Especially in shallow coastal seas like the Wadden Sea, this will enhance particle retention, shift organic matter degradation to the benthic compartment and enhance nutrient removal from the biogeochemical cycle by denitrification or apatite formation.     

Escaping the climate policy uncertainty trap: options contracts for REDD+

Climate policy uncertainty significantly hinders investments in low-carbon technologies, and the global community is behind schedule to curb carbon emissions. Strong actions will be necessary to limit the increase in global temperatures, and continued delays create risks of escalating climate change damages and future policy costs. These risks are system-wide, long-term and large-scale and thus hard to diversify across firms. Because of its unique scale, cost structure and near-term availability, Reducing Emissions from Deforestation and forest Degradation in developing countries (REDD+) has significant potential to help manage climate policy risks and facilitate the transition to lower greenhouse gas emissions. ‘Call’ options contracts in the form of the right but not the obligation to buy high-quality emissions reduction credits from jurisdictional REDD+ programmes at a predetermined price per ton of CO₂ could help unlock this potential despite the current lack of carbon markets that accept REDD+ for compliance. This approach could provide a globally important cost-containment mechanism and insurance for firms against higher future carbon prices, while channelling finance to avoid deforestation until policy uncertainties decline and carbon markets scale up.

Key policy insights

• Climate policy uncertainty discourages abatement investments, exposing firms to an escalating systemic risk of future rapid increases in emission control expenditures.

• This situation poses a risk of an abatement ‘short squeeze,’ paralleling the case in financial markets when prices jump sharply as investors rush to square accounts on an investment they have sold ‘short’, one they have bet against and promised to repay later in anticipation of falling prices.

• There is likely to be a willingness to pay for mechanisms that hedge the risks of abruptly rising carbon prices, in particular for ‘call’ options, the right but not the obligation to buy high-quality emissions reduction credits at a predetermined price, due to the significantly lower upfront capital expenditure compared to other hedging alternatives.

• Establishing rules as soon as possible for compliance market acceptance of high-quality emissions reductions credits from REDD+ would facilitate REDD+ transactions, including via options-based contracts, which could help fill the gap of uncertain climate policies in the short and medium term.

     

Generalized Coarse Graining Procedures for Flow in Porous Media

This paper focuses on heterogeneous soil conductivities and on the impact their resolution has on a solution of the piezometric head equation: owing to spatial variations of the conductivity, the flow properties at larger scales differ from those found for experiments performed at smaller scales. The method of coarse graining is proposed in order to upscale the piezometric head equation on arbitrary intermediate scales. At intermediate scales large scale fluctuations of the conductivities are resolved, whereas small scale fluctuations are smoothed by a partialy spatial filtering procedure. The filtering procedure is performed in Fourier space with the aid of a low-frequency cut-off function. We derive the partially upscaled head equations. In these equations, the impact of the small scale variability is modeled by scale dependent effective conductivities which are determined by additional differential equations. Explicit results for the scale dependent conductivity values are presented in lowest order perturbation theory. The perturbation theory contributions are summed up with using a renormalisation group analysis yielding explicit results for the effective conductivity in isotropic media. Therefore, the results are also valid for highly heterogeneous media. The results are compared with numerical simulations performed by Dykaar and Kitanidis (1992). The method of coarse graining combined by a renormalisation group analysis offers a tool to derive exact and explicit expressions for resolution dependent conductivity values. It is, e.g., relevant for the interpretation of measurement data on different scales and for reduction of grid-block resolution in numerical modeling. This revised version was published online in July 2006 with corrections to the Cover Date.     

Towards a detailed distal tephrostratigraphy in the Central Mediterranean: The last 20,000 yrs record of Lago Grande di Monticchio

A detailed compilation of distal tephrostratigraphy comprising the last 20,000 yrs is given for the Central Mediterranean region. A total of 47 distinct ash layers identified in the maar lake sediments of Lago Grande di Monticchio (Basilicata, Southern Italy) are compared with proximal and distal terrestrial-marine tephra deposits in the circum-central Mediterranean region. The results of these studies provide valuable information for reconstructing the Late Pleistocene and the Holocene dispersal of pyroclastic deposits from south Italian explosive volcanoes, in particular Somma-Vesuvius, the Campi Flegrei caldera, Ischia Island and Mount Etna. Prominent tephras are discussed with respect to their reliability as dating and correlation tools in sedimentary records. Ashes from Plinian eruptions of Somma-Vesuvius (i.e. Avellino, Mercato, Greenish, Pomici di Base), for instance, are well-defined by their distribution patterns and their unique composition. The widespread Y-1 tephra from Mount Etna, on the other hand, derived most likely from two distinct Plinian events with changing wind conditions, and therefore becomes a less reliable stratigraphic marker. Statistical–numerical calculations are presented in order to discriminate between Holocene tephras from the Campi Flegrei caldera (i.e. Astroni 1–3, Agnano Monte Spina, Averno 1, Lagno Amendolare), since these ashes are characterized by an almost indistinguishable chemical fingerprint. As a highlight, numerous Campanian eruptions of proposed low-intensity have been identified in the distal site of Monticchio suggesting a revision of existing tephra dispersal maps and re-calculation of eruptive conditions. In summary, the tephra record of Monticchio is one of the key successions for linking both, terrestrial records from Central-southern Italy and marine sequences from the Tyrrhenian, Adriatic and Ionian Seas.     

Classification of artificial (man-made) ground

The legacy inherited from anthropogenic processes needs to be addressed in order to provide reliable and up-to-date ground information relevant to development and regeneration in the urban environment. The legacy includes voids as well as anthropogenic deposits (artificial ground). Their characteristics derive from former quarrying and mining activities industrial processes creating derelict ground, variably consolidated made ground, and contaminated groundwater and soils. All need to be systematically assessed to inform the planning process and provide the basis for engineering solutions. Site-specific investigation needs to be conducted on the back of good quality geoscientific data. This comes from ‘field’ survey, remotely sensed data interpretation, historical maps, soil geochemical sampling, and geotechnical investigation. Three-dimensional and, in the future, four dimensional, characterization of superficial deposits is required to reach an understanding of the potential spatial lithological variability of artificial ground and the geometry of important surfaces, i.e. the boundary conditions. The classification scheme for artificial ground outlined in this paper and adopted by the British Geological Survey, will help in achieving this understanding.