Calculated Phase Relations in the System Na2O-CaO-K2O-FeO-MgO-Al2O3-SiO2-H2O with Applications to UHP Eclogites and Whiteschists

Pressure–temperature grids in the system Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O and its subsystems have been calculatedin the range 15–45 kbar and 550–900°C, usingan internally consistent thermodynamic dataset and new thermodynamicmodels for amphibole, white mica, and clinopyroxene, with thesoftware THERMOCALC. Minerals considered for the grids includegarnet, omphacite, diopside, jadeite, hornblende, actinolite,glaucophane, zoisite, lawsonite, kyanite, coesite, quartz, talc,muscovite, paragonite, biotite, chlorite, and plagioclase. Compatibilitydiagrams are used to illustrate the phase relationships in thegrids. Coesite-bearing eclogites and a whiteschist from Chinaare used to demonstrate the ability of pseudosections to modelphase relationships in natural ultrahigh-pressure metamorphicrocks. Under water-saturated conditions, chlorite-bearing assemblagesin Mg- and Al-rich eclogites are stable at lower temperaturesthan in Fe-rich eclogites. The relative temperature stabilityof the three amphiboles is hornblende > actinolite > glaucophane(amphibole names used sensu lato). Talc-bearing assemblagesare stable only at low temperature and high pressure in Mg-and Al-rich eclogites. For most eclogite compositions, talccoexists with lawsonite, but not zoisite, in the stability fieldof coesite. Water content contouring of pressure–temperaturepseudosections, along with appropriate geotherms, provides newconstraints concerning dehydration of such rocks in subductingslabs. Chlorite and lawsonite are two important H₂O-carriersin subducting slabs. Depending on bulk composition and pressure–temperaturepath, amphibole may or may not be a major H₂O-carrier to depth.In most cases, dehydration to make ultrahigh-pressure eclogitestakes place gradually, with H₂O content controlled by divariantor higher variance assemblages. Therefore, fluid fluxes in subductionzones are likely to be continuous, with the rate of dehydrationchanging with changing pressure and temperature. Further, eclogitesof different bulk compositions dehydrate differently. Dehydrationof Fe-rich eclogite is nearly complete at relatively shallowdepth, whereas Mg- and Al-rich eclogites dehydrate continuouslydown to greater depth. KEY WORDS: dehydration; eclogites; phase relations; THERMOCALC; UHP metamorphism; whiteschists     

Evolution from Oceanic Subduction to Continental Collision: a Case Study from the Northern Tibetan Plateau Based on Geochemical and Geochronological Data

Two apparently distinct, sub-parallel, paleo-subduction zonescan be recognized along the northern margin of the Tibetan Plateau:the North Qilian Suture Zone (oceanic-type) with ophioliticmélanges and high-pressure eclogites and blueschistsin the north, and the North Qaidam Belt (continental-type) inthe south, an ultrahigh-pressure (UHP) metamorphic terrane comprisingpelitic and granitic gneisses, eclogites and garnet peridotites.Eclogites from both belts have protoliths broadly similar tomid-ocean ridge basalts (MORB) or oceanic island basalts (OIB)in composition with overlapping metamorphic ages (480–440Ma, with weighted mean ages of 464 ± 6 Ma for North Qilianand 457 ± 7 Ma for North Qaidam), determined by zirconU–Pb sensitive high-resolution ion microprobe dating.Coesite-bearing zircon grains in pelitic gneisses from the NorthQaidam UHP Belt yield a peak metamorphic age of 423 ±6 Ma, 40 Myr younger than the age of eclogite formation, anda retrograde age of 403 ± 9 Ma. These data, combinedwith regional relationships, allow us to infer that these twoparallel belts may represent an evolutionary sequence from oceanicsubduction to continental collision, and continental underthrusting,to final exhumation. The Qilian–Qaidam Craton was probablya fragment of the Rodinia supercontinent with a passive marginand extended oceanic lithosphere in the north, which was subductedbeneath the North China Craton to depths >100 km at c. 423Ma and exhumed at c. 403 Ma (zircon rim ages in pelitic gneiss). KEY WORDS: HP and UHP rocks; subduction belts; zircon SHRIMP ages; Northern Tibetan Plateau     

Ca-rich Garnet-Clinopyroxene Rocks at Hujialin in the Su-Lu Terrane (Eastern China): Deeply Subducted Arc Cumulates?

Layers of Ca-rich garnet–clinopyroxene rocks enclosedin a serpentinite body at Hujialin, in the Su–Lu terraneof eastern China, preserve igneous textures, relict spinel ingarnet, and exsolution lamellae of Ca-rich garnet, ilmenite/magnetite,Fe-rich spinel, and also amphibole in clinopyroxene. In termsof their major and trace element compositions, the studied samplesform a trend from arc cumulates towards Fe–Ti gabbros.Reconstructed augite compositions plot on the trend for clinopyroxenein arc cumulates. These data suggest that the rocks crystallizedfrom mantle-derived magmas differentiated to various extentsbeneath an arc. The Ca-rich garnet + diopside assemblage isinferred to have formed by compressing Ca-rich augite, whereasthe relatively Mg-rich cores of garnet porphyroblasts may haveformed at the expense of spinel. The protolith cumulates weresubducted from near the crust–mantle boundary (c. 1 GPa)deep into the upper mantle (4·8 ± 0·6 GPaand 750 ± 50°C). Negatively sloped P–T pathsfor the garnet–clinopyroxene rocks and the corollary ofcorner flow induced subduction of mantle wedge peridotite arenot supported by the available data. Cooling with, or without,decompression of the cumulates after the igneous stage probablyoccurred prior to deep subduction. KEY WORDS: arc cumulates; Ca-rich garnet; garnet–clinopyroxene rocks; Su–Lu terrane; UHP metamorphism     

深层地震勘探激发井深探讨

深层地震勘探野外资料采集的关键是在保证原始资料一定信噪比的基础上,同时兼顾分辨率,激发井深是决定资料品质的重要因素之一。通过对虚反射滤波作用分析,提出了充分利用虚反射能量设计最佳激发井深,增强下传地震波能量的采集方法。理论分析和试验资料表明,在高速层下4～7m的最佳激发岩性深度是深层勘探的理想井深。     

二维地震观测系统合理性的论证方法

已知勘查区深度范围前提下,最大炮检X和道间距ΔX,不可以太大也不可以太小,施工前能够计算出它的允许值范围。     

斯通利波和渗透率的关系分析

理论和实际资料证明,在渗透性地层,低频斯通利波出现的频散和能量衰减与地层渗透率有关,因此可利用斯通利波的传播速度和能量衰减等特性来估算地层渗透率。斯通利波的能量和渗透率负相关。因为斯通利波能量代表了斯通利波的有关信息,因此可以认定斯通利波和渗透率负相关。     

低阻油气储层测井解释方法研究

对低阻油气储层的测井响应特征和储层物性特征进行了研究,并针对研究区域低阻储层的特点,以岩心与测井数据的相关性为依据,提出了适合地区特点的储层参数解释方法。通过应用三水导电模型,提高了低阻储层的测井解释精度。     

三种高程传递方法的精度分析

通过试验对悬挂钢尺、GPS测高和全站仪垂直测高三种高程传递方法进行了理论分析与精度比较,并讨论了各种方法在实际应用中的优点与局限性。     

C++Builder结合Matlab在测量数据处理中的应用

根据测量数据处理的特点,通过对C++Builder6.0和MATLAB特点的分析,得出C++Builder6.0和MATLAB语言两者结合,能够大大提高测量数据处理效率。详细介绍了一种以C++Builder为系统开发平台,利用MATLAB进行测量数据处理的过程。并列举平差程序的一部分源码供参考。     

高分辨率格网空间重力异常的精密确定

介绍高分辨率格网空间重力异常精密确定的方法,并利用深圳及周边地区5 213个高精度实测重力值、高分辨率数字地形模型和WDM94地球重力场模型,采用移去-恢复技术和加权平均法计算深圳市1 km和2 km分辨率的格网空间重力异常.计算结果表明:该地区1 km和2 km分辨率的格网空间重力异常的精度分别为±1.560 mGal和±4.442 mGal.1 km分辨率的格网空间重力异常成果已应用于该地区似大地水准面的精化,产生了较大的经济效益和社会效益.