COULOMB STRESS CHANGE ON ACTIVE FAULTS IN SICHUAN-YUNNAN REGION AND ITS IMPLICATIONS FOR SEISMIC HAZARD

Coulomb stress change on active faults is critical for seismic hazard analysis and has been widely used at home and abroad. The Sichuan-Yunnan region is one of the most tectonically and seismically active regions in Mainland China, considering some highly-populated cities and the historical earthquake records in this region, stress evolution and seismic hazard on these active faults capture much attention. From the physical principal, the occurrence of earthquakes will not only cause stress drop and strain energy release on the seismogenic faults, but also transfer stress to the surrounding faults, hence alter the shear and normal stress on the surrounding faults that may delay, hasten or even trigger subsequent earthquakes. Previously, most studies focus on the coseismic Coulomb stress change according to the elastic dislocation model. However, the gradually plentiful observation data attest to the importance of postseismic viscoelastic relaxation effect during the analysis of seismic interactions, stress evolution along faults and the cumulative effect on the longer time scale of the surrounding fault zone. In this paper, in order to assess the seismic hazard in Sichuan-Yunnan region, based on the elastic dislocation theory and the stratified viscoelastic model, we employ the PSGRN/PSCMP program to calculate the cumulative Coulomb stress change on the main boundary faults and in inner blocks in this region, by combining the influence of coseismic dislocations of the M≥7.0 historical strong earthquakes since the Yongsheng M7.8 earthquake in 1515 in Sichuan-Yunnan region and M≥8.0 events in the neighboring area, and the postseismic viscoelastic relaxation effect of the lower crust and upper mantle. The results show that the Coulomb stress change increases significantly in the south section of the Xianshuihe Fault, the Anninghe Fault, the northern section of the Xiaojiang Fault, the southern section of the Longmen Shan Fault, the intersection of the Chuxiong-Jianshui Fault and the Xiaojiang Fault, and the Shawan section of the Litang Fault, in which the cumulative Coulomb stress change exceeds 0.1MPa. The assuming different friction coefficient has little effect on the stress change, as for the strike-slip dominated faults, the shear stress change is much larger than the normal stress change, and the shear stress change is the main factor controlling the Coulomb stress change on the fault plane. Meanwhile, we compare the Coulomb stress change in the 10km and 15km depths, and find that for most faults, the results are slightly different. Additionally, based on the existing focal mechanism solutions, we add the focal mechanism solutions of the 5 675 small-medium earthquakes(2.5≤M≤4.9)in Sichuan-Yunnan region from January 2009 to July 2019, and invert the directions of the three principal stresses and the stress shape factor in 0.1°×0.1° grid points; by combining the grid search method, we compare the inverted stress tensors with that from the actual seismic data, and further obtain the optimal stress tensors. Then, we project the stress tensors on the two inverted nodal planes separately, and select the maximum Coulomb stress change to represent the stress change at the node. The results show that the cumulative Coulomb stress change increase in the triple-junction of Sichuan-Yunnan-Tibet region is also significant, and the stress change exceeds 0.1MPa. Comprehensive analysis of the Coulomb stress change, seismic gaps and seismicity parameters suggest that more attention should be paid to the Anninghe Fault, the northern section of the Xiaojiang Fault, the south section of the Xianshuihe Fault, the southern section of the Longmen Shan Fault and the triple-junction of the Sichuan-Yunnan-Tibet region. These results provide a basis for future seismic hazard analysis in the Sichuan-Yunnan region.     

新一代天气雷达(CINRAD)体扫模式起始仰角探讨

CINRAD所采用的各种体扫模式(VCP)均以仰角0.5°为起始进行扫描,通过分析雷达发射波束宽度、地物杂波对产品影响、雷达测量低仰角回波的重要性等因素,提出了CINRAD在低仰角观测时选取低仰角的原则,以及低仰角观测时应注意的问题.     

基于海温遥感资料的海洋锋检测方法

介绍了海洋锋的特点和本文选用的资料源,详细研究了海洋锋检测算法,给出了梯度和锋线检测结果,最后分析了东海黑潮锋季节变化规律,为基于海温遥感资料的海洋锋检测方法业务化应用提供参考。     

招平断裂带北段构造控矿特征及找矿方向

招（远）平（度）断裂为胶东西北部三大控矿断裂之一。招平断裂北段玲珑金矿田范围内,向北分为NNE向九曲蒋家和NEE向破头青断裂,该文以它们的交会部位至2条断裂带在玲珑金矿田的结束部位及其所控金矿脉为主要研究内容,通过对招平断裂北段地质构造特征的研究,分析了招平断裂北段的形成和控矿机制,提出了破头青断裂不是控矿断裂的新认识,总结了该区金矿的赋存规律,预测成矿有利部位,提出找矿方向。     

语素关联约束的动态环境视觉定位优化

在自动驾驶场景中,视觉相机能够实现低成本的定位与环境感知,但是场景中的动态目标会影响视觉定位的轨迹.对此,本文提出了语素关联约束的动态环境视觉定位优化方法.首先,利用目标检测和语义分割提取环境中的语义实体;然后,通过语素关联模型识别出动态语素;最后,建立动态语素的特征掩膜,用于特征匹配过程中的动态目标特征点过滤,从而提高视觉定位效果.本文基于视觉机器人平台在校园道路开展了试验,发现了动态目标通过关键点影响视觉定位结果的规律——在转弯时或者目标在视野中横向移动时影响较大.试验结果表明,本文方法的动态语义要素识别的平均精度F1约为87％,并且在语素关联优化前后,局部区域最大轨迹距离差为2.463 m,与真值对比RMSE降低了38％.     

多源多尺度遥感影像色彩平衡方法研究及工程应用

一年一次的全国土地利用遥感监测工程已连续运行10多年,每年采用国内外高分辨率卫星遥感数据源20多种,因传感器不同、时相不同以及地物光谱存在差异等因素,导致工程影像成果色彩差异大,影像色彩平衡成为该工程的技术难点.本文在对比研究多种遥感影像匀色技术方法的基础上,结合工程实际需求,提出了大范围多源多尺度遥感影像自动匀色处理方案,并开发了相应的技术软件,取得了良好的应用效果.     

东莞市1∶500地形图一体化采编、建库与更新研究

对东莞市1∶500地形图外业采集、内业加工、数据规整及符号化、数据质检、入库和动态更新等方面进行详细描述,概括并总结了东莞市1∶500比例尺地形图从生产到更新全过程的技术路线,为东莞及其他地市的大比例尺地形图生产建库及应用等提供重要参考和借鉴.     

众源矢量数据分块纠正研究

众源矢量数据能够提供丰富的地理信息,但存在几何误差分布不均匀问题.针对众源矢量数据几何误差问题,本文提出一种众源矢量数据分块纠正方法.以遥感影像作为标准数据,通过模板匹配得到遥感影像与众源矢量数据的同名点,根据同名点的几何误差分布对众源矢量数据切分及分块纠正,最后拼接纠正结果实现众源矢量数据的纠正.本文以上海市OpenStreetMap矢量道路网作为实验数据进行分块纠正实验,实验结果表明分块纠正后众源矢量数据几何误差显著降低.     

优化网格法在小面积区域雷暴特征分析中的应用

为满足小面积区域(10 000 km²左右)雷电防御工作准确化、精细化的要求, 选取人工观测半径用以优化1 km×1 km网格的雷电参数。实例分析表明:优化网格法可以修正1 km×1 km相邻网格的年平均地闪密度值的大幅波动, 避免相邻网格突变值的出现。也可以使1 km×1 km网格的雷电日更符合气象意义。并可以准确分析用于表征区域强雷暴分布的平均单位雷电日地闪密度和最大单位雷电日地闪密度等雷电参数。     

基于海温异常的南海夏季风爆发的可预报性分析

定义了综合评估南海地区大气对海温异常等外强迫响应的指数,并以此作为中间变量提出了利用前期海温异常预报南海夏季风爆发早晚的方法,进一步分析了基于海温异常的南海夏季风爆发的可预报性。分析表明:基于前期海温的异常,对于以日为单位预报对象的定量的南海夏季风爆发日期来说,基本没有可预报性;而对于定性的南海夏季风爆发早晚的预测,则可预报性大为提高。其预报时效可以提前至前期秋季的11月份。