伊犁地区近35年冬季积雪变化特征分析

通过对伊犁地区8个气象地面观测站35a(1971—2005年)11—3月逐旬的冬季最大积雪深度、积雪日数、降水量和平均温度的统计分析,结果表明:伊犁地区冬季降雪的时间、空间分布不均,最大降雪发生在新源;平均雪深最大的是伊宁县,最小的是特克斯县;冬季积雪日数变化相对比较稳定;冬季降雪与平均温度存在着很好的响应关系。在SPSS中对冬季的平均温度与平均降水和平均雪深进行相关分析,发现平均雪深、平均温度和平均降水为显著正相关。     

基于PROSPECT＋SAIL模型的遥感叶面积指数反演

以PROSPECT+SAIL模型为基础，从物理机理角度反演植被叶面积指数(LAI)。首先，通过FLAASH模型进行大气校正，使得图像像元值表达植被冠层反射率； 然后，根据LOPEX 93数据库和JHU光谱数据库选择植物生化参数和光谱数据，以PROSPECT模型模拟出的植物叶片反射率和透射率作为SAIL模型的输入参数，得到植被冠层反射率，将结果与遥感影像的植被冠层反射率对应，回归出植被LAI； 最后，以地面实测数据对遥感反演数据进行验证，并分析了误差的可能来源。     

新疆西天山智博铁矿床地球化学及同位素特征

智博铁矿位于新疆西天山阿吾拉勒铁成矿带东段,矿体以层状、似层状、透镜状产出于下石炭统大哈拉军山组玄武质安山岩中。智博铁矿成矿作用主要划分为岩(矿)浆期和热液期2个成矿期次,包括3个成矿阶段:磁铁矿+透辉石阶段、磁铁矿+绿帘石+钾长石阶段和石英+硫化物+碳酸盐阶段。智博铁矿地球化学特征表明,其成矿构造背景为早石炭世南天山洋向伊犁板块俯冲形成的岛弧环境;火山岩与磁铁矿石具有相同的物质来源,均来源于受俯冲带流体交代的亏损地幔楔部分熔融形成的玄武质岩浆。智博铁矿为岩浆(主要)-热液(次要)复合型矿床,受俯冲流体交代的亏损地幔楔部分熔融形成富铁的玄武质岩浆,岩浆沿深大断裂上侵形成早期火山岩,上侵过程中由于物理化学条件的改变在不混溶作用下形成铁矿浆,铁矿浆侵入早期火山岩地层形成岩浆期磁铁矿体;后期富铁的岩浆或矿浆热液使围岩发生矿化与蚀变,形成热液期磁铁矿体。     

THE PALEOSEISMIC SURFACE RUPTURE AT SOUTH OF CENTRAL ALTYN TAGH FAULT AND ITS TECTONIC IMPLICATION

In this study, we described a 14km-long paleoearthquakes surface rupture across the salt flats of western Qaidam Basin, 10km south of the Xorkol segment of the central Altyn Tagh Fault, with satellite images interpretation and field investigation methods. The surface rupture strikes on average about N80°E sub-parallel to the main Altyn Tagh Fault, but is composed of several stepping segments with markedly different strike ranging from 68°N~87°E. The surface rupture is marked by pressure ridges, sub-fault strands, tension-gashes, pull-apart and faulted basins, likely caused by left-lateral strike-slip faulting. More than 30 pressure ridges can be distinguished with various rectangular, elliptical or elongated shapes. Most long axis of the ridges are oblique(90°N~140°E)to, but a few are nearly parallel to the surface rupture strike. The ridge sizes vary also, with heights from 1 to 15m, widths from several to 60m, and lengths from 10 to 100m. The overall size of these pressure ridges is similar to those found along the Altyn Tagh Fault, for instance, south of Pingding Shan or across Xorkol. Right-stepping 0.5~1m-deep gashes or sub-faults, with lengths from a few meters to several hundred meters, are distributed obliquely between ridges at an angle reaching 30°. The sub-faults are characterized with SE or NW facing 0.5~1m-high scarps. Several pull-apart and faulted basins are bounded by faults along the eastern part of the surface rupture. One large pull-apart basins are 6~7m deep and 400m wide. A faulted basin, 80m wide, 500m long and 3m deep, is bounded by 2 left-stepping left-lateral faults and 4 right-stepping normal faults. Two to three m-wide gashes are often seen on pressure ridges, and some ridges are left-laterally faulted and cut into several parts, probably owing to the occurrence of repetitive earthquakes. The OSL dating indicates that the most recent rupture might occur during Holocene.
Southwestwards the rupture trace disappears a few hundred meters north of a south dipping thrust scarp bounding uplifted and folded Plio-Quaternary sediments to the south. Thrust scarps can be followed southwestward for another 12km and suggest a connection with the south Pingding Shan Fault, a left-lateral splay of the main Altyn Tagh Fault. To the northeast the rupture trace progressively veers to the east and is seen cross-cutting the bajada south of Datonggou Nanshan and merging with active thrusts clearly outlined by south facing cumulative scarps across the fans. The geometry of this strike-slip fault trace and the clear young seismic geomorphology typifies the present and tectonically active link between left-lateral strike-slip faulting and thrusting along the eastern termination of the Altyn Tagh Fault, a process responsible for the growth of the Tibetan plateau at its northeastern margin. The discrete relation between thrusting and strike-slip faulting suggests discontinuous transfer of strain from strike-slip faulting to thrusting and thus stepwise northeastward slip-rate decrease along the Altyn Tagh Fault after each strike-slip/thrust junction.     

COULOMB STRESS CHANGE ON ACTIVE FAULTS IN SICHUAN-YUNNAN REGION AND ITS IMPLICATIONS FOR SEISMIC HAZARD

Coulomb stress change on active faults is critical for seismic hazard analysis and has been widely used at home and abroad. The Sichuan-Yunnan region is one of the most tectonically and seismically active regions in Mainland China, considering some highly-populated cities and the historical earthquake records in this region, stress evolution and seismic hazard on these active faults capture much attention. From the physical principal, the occurrence of earthquakes will not only cause stress drop and strain energy release on the seismogenic faults, but also transfer stress to the surrounding faults, hence alter the shear and normal stress on the surrounding faults that may delay, hasten or even trigger subsequent earthquakes. Previously, most studies focus on the coseismic Coulomb stress change according to the elastic dislocation model. However, the gradually plentiful observation data attest to the importance of postseismic viscoelastic relaxation effect during the analysis of seismic interactions, stress evolution along faults and the cumulative effect on the longer time scale of the surrounding fault zone. In this paper, in order to assess the seismic hazard in Sichuan-Yunnan region, based on the elastic dislocation theory and the stratified viscoelastic model, we employ the PSGRN/PSCMP program to calculate the cumulative Coulomb stress change on the main boundary faults and in inner blocks in this region, by combining the influence of coseismic dislocations of the M≥7.0 historical strong earthquakes since the Yongsheng M7.8 earthquake in 1515 in Sichuan-Yunnan region and M≥8.0 events in the neighboring area, and the postseismic viscoelastic relaxation effect of the lower crust and upper mantle. The results show that the Coulomb stress change increases significantly in the south section of the Xianshuihe Fault, the Anninghe Fault, the northern section of the Xiaojiang Fault, the southern section of the Longmen Shan Fault, the intersection of the Chuxiong-Jianshui Fault and the Xiaojiang Fault, and the Shawan section of the Litang Fault, in which the cumulative Coulomb stress change exceeds 0.1MPa. The assuming different friction coefficient has little effect on the stress change, as for the strike-slip dominated faults, the shear stress change is much larger than the normal stress change, and the shear stress change is the main factor controlling the Coulomb stress change on the fault plane. Meanwhile, we compare the Coulomb stress change in the 10km and 15km depths, and find that for most faults, the results are slightly different. Additionally, based on the existing focal mechanism solutions, we add the focal mechanism solutions of the 5 675 small-medium earthquakes(2.5≤M≤4.9)in Sichuan-Yunnan region from January 2009 to July 2019, and invert the directions of the three principal stresses and the stress shape factor in 0.1°×0.1° grid points; by combining the grid search method, we compare the inverted stress tensors with that from the actual seismic data, and further obtain the optimal stress tensors. Then, we project the stress tensors on the two inverted nodal planes separately, and select the maximum Coulomb stress change to represent the stress change at the node. The results show that the cumulative Coulomb stress change increase in the triple-junction of Sichuan-Yunnan-Tibet region is also significant, and the stress change exceeds 0.1MPa. Comprehensive analysis of the Coulomb stress change, seismic gaps and seismicity parameters suggest that more attention should be paid to the Anninghe Fault, the northern section of the Xiaojiang Fault, the south section of the Xianshuihe Fault, the southern section of the Longmen Shan Fault and the triple-junction of the Sichuan-Yunnan-Tibet region. These results provide a basis for future seismic hazard analysis in the Sichuan-Yunnan region.     

新一代天气雷达(CINRAD)体扫模式起始仰角探讨

CINRAD所采用的各种体扫模式(VCP)均以仰角0.5°为起始进行扫描,通过分析雷达发射波束宽度、地物杂波对产品影响、雷达测量低仰角回波的重要性等因素,提出了CINRAD在低仰角观测时选取低仰角的原则,以及低仰角观测时应注意的问题.     

基于海温遥感资料的海洋锋检测方法

介绍了海洋锋的特点和本文选用的资料源,详细研究了海洋锋检测算法,给出了梯度和锋线检测结果,最后分析了东海黑潮锋季节变化规律,为基于海温遥感资料的海洋锋检测方法业务化应用提供参考。     

招平断裂带北段构造控矿特征及找矿方向

招（远）平（度）断裂为胶东西北部三大控矿断裂之一。招平断裂北段玲珑金矿田范围内,向北分为NNE向九曲蒋家和NEE向破头青断裂,该文以它们的交会部位至2条断裂带在玲珑金矿田的结束部位及其所控金矿脉为主要研究内容,通过对招平断裂北段地质构造特征的研究,分析了招平断裂北段的形成和控矿机制,提出了破头青断裂不是控矿断裂的新认识,总结了该区金矿的赋存规律,预测成矿有利部位,提出找矿方向。     

语素关联约束的动态环境视觉定位优化

在自动驾驶场景中,视觉相机能够实现低成本的定位与环境感知,但是场景中的动态目标会影响视觉定位的轨迹.对此,本文提出了语素关联约束的动态环境视觉定位优化方法.首先,利用目标检测和语义分割提取环境中的语义实体;然后,通过语素关联模型识别出动态语素;最后,建立动态语素的特征掩膜,用于特征匹配过程中的动态目标特征点过滤,从而提高视觉定位效果.本文基于视觉机器人平台在校园道路开展了试验,发现了动态目标通过关键点影响视觉定位结果的规律——在转弯时或者目标在视野中横向移动时影响较大.试验结果表明,本文方法的动态语义要素识别的平均精度F1约为87％,并且在语素关联优化前后,局部区域最大轨迹距离差为2.463 m,与真值对比RMSE降低了38％.     

多源多尺度遥感影像色彩平衡方法研究及工程应用

一年一次的全国土地利用遥感监测工程已连续运行10多年,每年采用国内外高分辨率卫星遥感数据源20多种,因传感器不同、时相不同以及地物光谱存在差异等因素,导致工程影像成果色彩差异大,影像色彩平衡成为该工程的技术难点.本文在对比研究多种遥感影像匀色技术方法的基础上,结合工程实际需求,提出了大范围多源多尺度遥感影像自动匀色处理方案,并开发了相应的技术软件,取得了良好的应用效果.