Numerical Analysis of Gravity Coring Using Coupled Eulerian-Lagrangian Method and a New Corer

The shortcomings of gravity corers in sampling marine sediments have been observed extensively in various field tests. In order to optimize the coring, this article provides an alternative numerical way to model the gravity coring and analyze the sampling effect. Based on this analysis, a new hydraulic hammer corer is devised. A coupled Eulerian-Lagrangian method with capability of simulating the problem involving extreme deformation, penetration is used to simulate the coring process. The results show that the hydrostatic pressure and deviator stress increase and reach their peak when the pile tip is slightly above or at the level of the observation point and then drop rapidly when the pile tip slides below the observation point. In addition, the stress path indicates that the soil element sustains plastic compression before yielding and then expands until recovering to the original state. The obvious “under-sampling” phenomenon is also well-captured by the finite element model.     

不同刚度植物杆群对规则波传播及紊动特性影响研究

以不同刚度硅胶圆杆群为概化植物模型,测定其抗弯弹性模量,通过波浪水槽实验,研究规则波在不同刚度植物杆群内的流速分布、紊动特征及不同刚度杆群的消浪效果。实验结果表明,当波浪通过柔性杆群时,受其摆动的影响,流速周期变化从单峰型逐渐转变成双峰型,杆群刚度越小形成的二次波峰越明显;不同刚度杆群内水体紊动强度变化显示,杆群刚度越大,造成杆群内水体的紊动强度越大;随着杆群抗弯弹性模量的增大,其消浪系数也增大,消浪系数的增长与材料的抗弯弹性模量值非线性关系,而是在某一弹性模量范围内,对消浪系数的影响较为敏感。     

深海细菌太平洋火色杆菌中α-淀粉酶基因amy608的克隆表达及其酶学性质研究

从来自深海沉积物的太平洋火色杆菌(Flammeovirga pacifica)的基因组中发现了一个全长为1 875 bp的α-淀粉酶基因amy608.该基因在数据库中找不到具有同源性的序列,而所编码的Amy608蛋白与已注册蛋白的氨基酸序列相似性最高仅为56%,但具有α-淀粉酶水解活性所必需的保守基序DXEXD.进化树分析表明其属于糖苷水解酶13(GH13)家族第二亚家族.构建了p ColdΙ-amy608表达载体,在大肠杆菌中进行重组Amy608蛋白的异源表达,并采用镍离子亲和层析柱对重组蛋白进行了纯化.酶学性质分析表明,重组酶Amy608的最适作用温度为40℃,在40℃保温4 d后,仍保留70%以上的酶活,显示出良好的中温热稳定性;最适p H值为7.0,p H值范围在6~9时仍保留60%以上的酶活力,表明该酶具有较宽的p H值作用范围.Ca2+、Na+、K+对α-淀粉酶Amy608有激活作用,尤其是Ca2+可使酶活显著提高40%.薄层色谱分析结果显示该酶水解可溶性淀粉的最终产物以葡萄糖为主,表明该酶是一个糖化型淀粉水解内切酶.这些结果表明Amy608为GH13家族第二亚家族中一个新型的α-淀粉酶.     

便携式高频地波雷达海流探测长周期工作性能试验

2013年1月29日至3月15日在台湾海峡西南部海域进行了OSMAR-S100便携式高频地波雷达与浮标观测海流数据的长周期对比试验,验证了雷达系统在探测海流方面的准确性、可靠性和稳定性.通过实测海流与雷达矢量流的复相关分析,选定3 m层的海流为对比代表层.试验期间实测流速为0.0~120.0 cm/s,雷达海流有效探测区内的矢量流流速、流向的观测误差较小,能够满足实时监测海洋表层流的需要,高精度区流速、流向的均方根误差分别为9.1 cm/s和24.8°,边缘区的均方根误差为13.3~24.8 cm/s和39.4°~39.6°,与国内外达到业务化运行要求的同类产品实际观测精度相当.     

鄂尔多斯盆地南部地区延长组深水沉积构造特征及地质意义

鄂尔多斯盆地南部地区上三叠统延长组长7段发育有典型的重力流沉积。对野外露头剖面进行大量调查研究,发现研究区重力流沉积发育丰富的沉积构造,底层面构造、软沉积变形构造是主要的两种类型。这种深水沉积构造组合能够很好地揭示研究区广泛发育的一定坡度背景下深水重力流沉积体系。滑移-滑塌沉积、砂质碎屑流沉积、浊流沉积是研究区发育最为广泛的深水重力流沉积类型,滑移-滑塌及软沉积变形构造为触发机制沉积响应,底层面构造为砂质碎屑流沉积及浊流沉积响应。综合分析研究区地层发育的大量凝灰岩夹层、深水泥岩中发育的植物碎屑、深水砂岩中发育的大量浅黄色泥砾等沉积特征,认为地震、火山喷发及季节性洪水为研究区深水重力流沉积最有利的触发因素。     

深水稀井区天然气藏储盖组合定量预测方法研究:以琼东南盆地陵水凹陷为例

南海北部油气勘探表明天然气是本地区主要的资源类型。与石油相比,天然气藏的形成对盖层要求更为严格,因此开展天然气藏储盖组合研究对油气勘探具有重要意义。通过统计和调研的方法,将砂岩储层孔隙度12%定义为琼东南盆地天然气有效储层评价的下限参数,将泥岩排替压力1 MPa定义为天然气有效泥岩盖层评价的下限参数。利用测井资料开展了单井天然气藏储盖组合窗口定量预测,得出陵水凹陷W22-1井发育单个天然气藏储盖组合窗口。在此基础上,针对稀井或无井区,提出了基于地震反演速度剖面的天然气藏储盖组合定量预测方法,以琼东南盆地陵水凹陷主洼过井测线为例,开展了天然气藏储盖组合窗口地震预测,确定出该凹陷主洼发育单个天然气藏储盖组合窗口,大体上包括陵水组-莺歌海组上部多套地层,拓宽了陵水凹陷天然气勘探层系。这种方法对其它深水区和低勘探新区均有借鉴意义。     

The morphological characteristics of gully systems and watersheds in Dry-Hot Valley,SW China

Gully systems and watersheds are geomorphic units with clear boundaries that are relatively independent of basin landscapes and play an important role in natural geography. In order to explore the morphological characteristics of gully systems and watersheds in the Dry-Hot Valley [South West (SW) China], gullies are interpreted from online Google images with high resolution and watersheds are extracted from digital elevation model at a scale of 1:50,000. The results show that: (1) There are 17,382 gullies (with a total area of 1141.66 km²) and 42 watersheds in the study area. (2) The average gully density of the study area (D) is 4.29 km/km², gully frequency (F) is 14.39 gullies/km², the branching ratio (B) is 5.13, the length ratio (L) is 3.12, and the coefficient of the main and tributary gullies (M) is 0.06. The degree of gully erosion is strong to extremely strong, the main development intensity of gully erosion ranges from intense to moderate, and the type of gully system is tributary. (3) The watershed areas (A) are between 0.39 and 96.43 km², the relief ratio (R) is from 0.10 to 0.19, the circularity ratio (C) is from 0.30 to 0.83, the texture ratio (T) is from 0.82 to 39.35, and the dominant geomorphological texture type is fine. (4) There is a quantitative relationship between F and D:F?=?0.624D² (R?=0.84) and T is closely related to D, F, M (R²?>?0.7). A, R and C are related to M (R²?>?0.5). The development of gully systems is the result of coupling effects between multiple factors. In this area, the degree of erosion and the condition of the main and tributary gullies can be controlled by the degree of topographic breakage in the watershed, which provides some theoretical basis for the evaluation of gully erosion by the latter. In addition, the scale, relief, and shape have a significant impact on the locations of the main and tributary gullies. For tributary gullies, attention should be paid to the interception and control of runoff and sediment in the small confluence branches in order to prevent gully expansion and head advance. These features can inform the development of targeted measures for the control of soil erosion.     

The Late Triassic I–Type Granites from the Longmu Co–Shuanghu Suture Zone in the interior of Tibetan Plateau, China: Petrogenesis and Implication for Slab Break–Off

The Jiangaidarina granitic mass(JM) is an important part of the magmatic belt in Longmu CoShuanghu Suture Zone(LSSZ) in the central Tibetan Plateau. An integrated research involving wholerock geochemistry, zircon LA-ICP-MS U-Pb ages and Hf isotopic compositions was carried out to define the timing, genesis and tectonic setting of the JM. Zircon LA-ICP-MS U-Pb ages have been obtained ranging from 210 to 215 Ma, rather than the Early Jurassic as previously thought. Fifteen granite samples contain hornblendes and show a negative correlation between P_2 O_5 and SiO_2, indicating that the JM is an I-type granite. All the granites are enriched in LREE relative to HREE, with negative Eu anomalies(Eu/Eu*=0.56-0.81), and have similar trace elements patterns, with depletion of Ba, Nb, Sr and P. These suggest that the JM was fractionated, and this is also proved by the characteristic of negative correlations between oxide elements(TiO_2, MgO, FeOt, MnO, CaO) and SiO_2. Almost all ε_(Hf)(t) values of the granites are between-10.3 and-5.8, implying that the JM has a crustal source intimately related with the South Qiangtang Block(SQB), except for one(+10.2), showing a minor contribution from mantle source.Moreover, relatively low Na_2 O/K_2 O ratios(0.42-0.93) and high A/CNK values(0.91-1.50) reflect that the JM was predominately derived from the medium-high potassium basaltic crust, interacted with greywacke. Our new geochemical data and geochronological results imply that the Late Triassic magmas were generated in a post-collisional tectonic setting, probably caused by slab break-off of the Longmu Co-Shuanghu Tethyan Ocean(LSTO). This mechanism caused the asthenosphere upwelling, formed extension setting, offered an enormous amount of heat, and provided favorable conditions for emplacement of voluminous felsic magmas. Furthermore, the LSTO could be completely closed during the Middle Triassic, succeed by continental collision and later the slab broke off in the Late Triassic.