Discharge‐sediment processes of the Zhadang glacier on the Tibetan Plateau measured with a high frequency data acquisition system

In high elevation cold regions of the Tibetan Plateau, suspended sediment transfer from glacier meltwater erosion is one of the important hydrological components. The Zhadang glacier is a typical valley‐type glacier in the Nyainqentanglha Mountains on the Tibetan Plateau. To make frequent and long period records of meltwater runoff and sediment processes in the very high elevation and isolated regions, an automatic system was installed near the glacier snout (5400 m a.s.l) in August 2013, to measure the transient discharge and sediment processes at 5‐min interval, which is shorter than the time span for the water flow to traverse the catchment from the farthest end to the watershed outlet. Diurnal variations of discharge, and suspended sediment concentration (SSC) were recorded at high frequency for the Zhadang glacier, before suspended sediment load (SSL) was computed. Hourly SSC varied from the range of 0.2 kg/m³ to 0.5 kg/m³ (at 8:00–9:00) to the range of 2.0 kg/m³ to 4.0 kg/m³ (at 17:00–18:00). The daily SSL was 32.24 t during the intense ablation period. Hourly SSC was linearly correlated with discharge (r = 0.885**, n = 18, p < 0.01). A digit‐eight hysteresis loop was observed for the sediment transport in the glacier area. Air temperature fluctuations influence discharge, and then result in the sediment variations. The results of this study provide insight into the responses of suspended sediment delivery processes with a high frequency data in the high elevation cold regions. Copyright © 2016 John Wiley & Sons, Ltd.     

A new standardized Palmer drought index for hydro‐meteorological use

Accepting the concept of standardization introduced by the standardized precipitation index, similar methodologies have been developed to construct some other standardized drought indices such as the standardized precipitation evapotranspiration index (SPEI). In this study, the authors provided deep insight into the SPEI and recognized potential deficiencies/limitations in relating to the climatic water balance it used. By coupling another well‐known Palmer drought severity index (PDSI), we proposed a new standardized Palmer drought index (SPDI) through a moisture departure probabilistic approach, which allows multi‐scalar calculation for accurate temporal and spatial comparison of the hydro‐meteorological conditions of different locations. Using datasets of monthly precipitation, temperature and soil available water capacity, the moisture deficit/surplus was calculated at multiple temporal scales, and a couple of techniques were adopted to adjust corresponding time series to a generalized extreme value distribution out of several candidates. Results of the historical records (1900–2012) for diverse climates by multiple indices showed that the SPDI was highly consistent and correlated with the SPEI and self‐calibrated PDSI at most analysed time scales. Furthermore, a simple experiment of hypothetical temperature and/or precipitation change scenarios also verified the effectiveness of this newly derived SPDI in response to climate change impacts. Being more robust and preferable in spatial consistency and comparability as well as combining the simplicity of calculation with sufficient accounting of the physical nature of water supply and demand relating to droughts, the SPDI is promising to serve as a competent reference and an alternative for drought assessment and monitoring. Copyright © 2013 John Wiley & Sons, Ltd.     

Watershed delineation using hydrographic features and a DEM in plain river network region

Watershed delineation is a required step when conducting any spatially distributed hydrological modelling. Automated approaches are often proposed to delineate a watershed based on a river network extracted from the digital elevation model (DEM) using the deterministic eight‐neighbour (D8) method. However, a realistic river network cannot be derived from conventional DEM processing methods for a large flat area with a complex network of rivers, lakes, reservoirs, and polders, referred to as a plain river network region (PRNR). In this study, a new approach, which uses both hydrographic features and DEM, has been developed to address the problems of watershed delineation in PRNR. It extracts the river nodes and determines the flow directions of the river network based on a vector‐based hydrographic feature data model. The river network, lakes, reservoirs, and polders are then used to modify the flow directions of grid cells determined by D8 approach. The watershed is eventually delineated into four types of catchments including lakes, reservoirs, polders, and overland catchments based on the flow direction matrix and the location of river nodes. Multiple flow directions of grid cells are represented using a multi‐direction encoding method, and multiple outflows of catchments are also reflected in the topology of catchments. The proposed approach is applied to the western Taihu watershed in China. Comparisons between the results obtained from the D8 approach, the ‘stream burning’ approach, and those from the proposed approach clearly demonstrate an improvement of the new approach over the conventional approaches. This approach will benefit the development of distributed hydrological models in PRNR for the consideration of different types and multiple inlets and outlets of catchments. Copyright © 2015 John Wiley & Sons, Ltd.     

求解GM(1,1)模型新总体最小二乘算法

在GM(1,1)模型中系数矩阵和观测向量都是由原始序列组成的。系数矩阵中同样是有误差的,与观测向量中的误差一样,亦来源于原始序列,即它们误差同源。不同位置的相同元素应该有相同的改正数,采用传统总体最小二乘求解则不能达到此目的。针对这一缺陷,推导了一种新的总体最小二乘算法;并且通过算例验证了新方法的可行性和有效性。     

渝东南下古生界页岩构造裂缝形成及分布控制因素

天然裂缝对页岩气储集和渗流有重要影响,但目前对页岩构造裂缝研究不够深入。本文通过露头、岩心裂缝观察和分析,探讨了渝东南下古生界页岩构造裂缝类型、形成机理及分布控制因素。基于裂缝特征及力学成因,将剪切裂缝分为高角度剪切裂缝、倾斜滑脱裂缝和水平滑脱裂缝。倾斜滑脱裂缝是在上覆岩层重力和水平构造应力共同作用下沿应力集中的软弱面发生剪切滑动形成,水平滑脱裂缝是在构造挤压应力作用条件下主要沿页理面方向的剪切或层间滑动形成;页理发育程度及岩层曲率是控制水平滑脱裂缝形成的关键因素,岩石矿物组成、构造作用及岩层厚度是控制其它类型构造裂缝形成和分布的主要因素,页岩岩石力学层的划分需要根据裂缝特征、岩性变化特征、岩石力学参数及沉积界面等综合确定,岩层厚度与层间构造裂缝密度呈负相关关系。     

GPS 高程转换的总体最小二乘组合方法

在现有GPS高程转换的研究中,通常只采用单一的解算方法,然而,不同的计算方法由于适用的条件不同,在对同一组数据进行解算时,解算的精度也各有优劣。针对以上问题,文中提出GPS高程转换的总体最小二乘组合方法,对多种不同的高程转换方法进行组合,运用总体最小二乘法计算不同方法的权值,结合实际工程数据,验证该方法的可行性。计算结果表明,提出的方法能够有效地提高高程转换精度。     

一种裸露土壤湿度反演方法

针对目前土壤湿度反演方法研究较少且缺少实时性的现状,该文提出一种土壤湿度反演方法——最小二乘支持向量机技术。以积分方程模型为正向算法,数值模拟不同雷达参数(频率、入射角及极化)下后向散射系数随土壤含水量和地表粗糙度的变化情况。经过数据敏感性分析,选取C-波段和X-波段、小入射角下的同极化后向散射系数作为支持向量回归的训练样本信息;经过适当的训练,利用支持向量回归技术对土壤含水量进行了反演研究;并考虑通过多频率、多极化、多入射角数据的组合,消除地表粗糙度的影响,提高反演精度。模拟结果表明,该方法反演土壤湿度具有较高的精度和较好的实时性;同时,与人工神经网络方法的结果比较,证明了该方法的有效性,为土壤湿度的反演研究提供了一种方法。     

Grid pattern recognition in road networks using the C4.5 algorithm

Pattern recognition in road networks can be used for different applications, including spatiotemporal data mining, automated map generalization, data matching of different levels of detail, and other important research topics. Grid patterns are a common pattern type. This paper proposes and implements a method for grid pattern recognition based on the idea of mesh classification through a supervised learning process. To train the classifier, training datasets are selected from worldwide city samples with different cultural, historical, and geographical environments. Meshes are subsequently labeled as composing or noncomposing grids by participants in an experiment, and the mesh measures are defined while accounting for the mesh’s individual characteristics and spatial context. The classifier is generated using the C4.5 algorithm. The accuracy of the classifier is evaluated using Kappa statistics and the overall rate of correctness. The average Kappa value is approximately 0.74, which corresponds to a total accuracy of 87.5%. Additionally, the rationality of the classifier is evaluated in an interpretation step. Two other existing grid pattern recognition methods were also tested on the datasets, and comparison results indicate that our approach is effective in identifying grid patterns in road networks.     

伊通盆地鹿乡断陷C区块含油饱和度与含油性分析

综合研究伊通盆地鹿乡断陷双二段储层的岩性、含油性和含油饱和度,确定了适用于本区的含油饱和度计算方法,并与实际含油性进行了对比,分析了沉积和构造对含油性的影响。研究区双二段含油储层的岩性以粉砂岩、细砂岩和砂砾岩为主,含油级别为荧光级以上。根据阿尔奇公式计算出的含油饱和度大部分与实际的含油性相符合,并将含油饱和度70%、50%和38%值作为本区气层、油层、油水层和水层的区分标准。本区储层的含油性受到沉积和构造两方面的控制,沉积作用主要控制储层的岩石结构和物性,构造控制油气的聚集,即在构造高部位,实际含油饱和度比计算结果要高,而在构造低部位,实际含油饱和度比计算结果要低。