A photoautotrophic source for lycopane in marine water columns

Suspended particulate matter and recent sediments from diverse oceanic sites have been investigated for their contents of lycopane. Lycopane was present in all samples, including both oxic and anoxic water column and sediments. The highest concentrations in the water column were found in surface waters of the central Pacific gyre (1.5 ng/L) and in the anoxic waters of the Cariaco Trench (1.1 ng/L) and the Black Sea (0.3 ng/L). Vertical concentration profiles suggest that lycopane is probably algal in origin. Moreover, biogeochemical conditions in anoxic zones apparently result in a secondary production of lycopane from an as yet unidentified precursor. Compound-specific carbon isotopic analyses have been carried out on lycopane from water column and sediment samples. Isotopic compositions of lycopane range between -23.6% and -32.9% and are consistent with a photoautotrophic origin. We postulate that some lycopane is produced in surface waters of the ocean, while additional lycopane is produced in anoxic zones by anaerobic microbial action on an algal precursor.     

Size effects of suspended particles on gill damage in green-lipped mussel Perna viridis

The green-lipped mussels Perna viridis were exposed to <500 μm suspended solids (SS) with concentrations of 0 (control), 250, 500, 750 and 1000 mg/L for 14 days, followed by transferring to clean, filtered seawater for 28 days. Results of scanning microscopy showed significantly higher damages to the cilia on the frontal surface of the gill filaments than that on the abfrontal surface in both demibranchs. Percent ciliary depletion varied with SS concentrations and time. No sign of recovery of the gill filaments was observed after the mussels were transferred to clean seawater. In a second experiment, mussels were exposed to SS with size range from <63, >125–<250 and >250–<500 μm at 600 mg/L, together with a control (0 mg/L) for 14 days, followed by transferring to clean, filtered seawater for 28 days. Results of scanning microscopy showed significant ciliary damages in both the ascending and descending lamellae under the three particle size groups as compared with the control. Percent depletion of frontal cilia was most serious for the >250–<500 μm size group and least for the <63 μm size group. However, percent depletion of abfrontal cilia was most serious for the >125–<250 μm size group and least for the <63 μm size group. No recovery of ciliary damages was observed. The effects of particle size of suspended sediments on the morphological damages of gill filaments in the green-lipped mussels were discussed.     

Predictive isotopic biogeochemistry: hydrocarbons from anoxic marine basins

Carbon isotopic compositions were determined for individual hydrocarbons in water column and sediment samples from the Cariaco Trench and Black Sea. In order to identify hydrocarbons derived from phytoplankton, the isotopic compositions expected for biomass of autotrophic organisms living in surface waters of both localities were calculated based on the concentrations of CO2(aq) and the isotopic compositions of dissolved inorganic carbon. These calculated values are compared to measured delta values for particulate organic carbon and for individual hydrocarbon compounds. Specifically, we find that lycopane is probably derived from phytoplankton and that diploptene is derived from the lipids of chemoautotrophs living above the oxic/anoxic boundary. Three acyclic isoprenoids that have been considered markers for methanogens, pentamethyleicosane and two hydrogenated squalenes, have different delta values and apparently do not derive from a common source. Based on the concentration profiles and isotopic compositions, the C31 and C33 n-alkanes and n-alkenes have a similar source, and both may have a planktonic origin. If so, previously assigned terrestrial origins of organic matter in some Black Sea sediments may be erroneous.     

Effect of dietary copper exposure on accumulation, growth and hematological parameters of the juvenile rockfish, Sebastes schlegeli

Copper accumulation, and its effect on growth and hematological parameters were investigated in juvenile rockfish, Sebastes schlegeli (mean length 11.83+/-0.03 cm, and mean weight 26.02+/-0.23 g), after sub-chronic dietary Cu exposure (0, 50, 125, 250 and 500 mg/kg) for 60 days. The profile of Cu accumulation among tissues in rockfish is dependent on the exposure periods and Cu concentration. Liver of rockfish is a more important storage tissue than other tissues, and the order of Cu accumulation in tissues was liver > intestine > kidney > gill > muscle. Cu reduced the growth rate, and there was an inverse relationship between growth and Cu concentration (> 50 mg/kg). The RNA:DNA ratios were not affected by exposure and there was no correlation between growth rate and RNA:DNA ratio in the liver and muscle. There was no significant effect of exposure on blood parameters except for magnesium. Cu exposure increased GOT and GPT serum concentrations with increasing time and dose.     

Effects of nitrogen and sulphide on macroinfaunal community: a microcosm study

A microcosm experiment was conducted to test the short-term effects of nitrogen (as TKN, total Kjeldahl nitrogen) and sulphide (as AVS, acid volatile sulphide) on macrobenthic infauna over a period of 8 weeks. The experiment consisted of four treatments using sediment cores (D: 8 cm, H: 20 cm) with addition of: I, nitrogen (N) to an in situ mean level of 0.48 mg Ng(-1) dw; II, sulphidic solution (S) to an in situ mean level of 318.8 microM S g(-1) dw; III, nitrogen and sulphidic solution (NS) to in situ mean levels of 0.45 mg Ng(-1) dw and 329.0 microM S g(-1) dw, respectively, and IV, control with no addition of N and S. Sediment cores were retrieved for analysis of infaunal composition after weeks 2, 4 and 8. A total of 646 specimens of macrobenthic infauna belonging to 27 species were recorded from the cores, in which polychaetes were the most abundant with respect to species and individual numbers. Mean species number and diversity H' of the control and N treatment was statistically higher than S and NS treatments, mean individual number of the S treatment was larger than the NS treatment, and mean evenness J of the S treatment was lower than the N and NS treatments as well as the control. Individual numbers also showed a significant increase from weeks 2 to 8, whereas evenness J decreased in weeks 4 and 8. Multivariate analyses of the faunal data suggested that benthic composition of the N treatment and control did not differ during the experimental period, but changes in benthic structure in S and NS treatments were evident. The present findings demonstrated the dose-response relationship of benthic species changes under controlled addition of N and S. The response to N and S additions in the sediment microcosms was in agreement with the general effects of organic enrichment on macrobenthic communities along a spatial gradient of organic pollution as described by Pearson and Rosenberg [Pearson, T.H., Rosenberg, R., 1978. Macrobenthic succession in relation to organic enrichment and pollution of the marine environment. Oceanography and Marine Biology Annual Review 16, 229-311]. However, in the present experiment, community changes in the treatments were observable in a short, temporal scale.     

Radiocesium reaction with illite and organic matter in marine sediment

The mineralogical effect on the (137)Cs reaction with marine sediment has not been systematically studied yet, even though illite has been known to adsorb Cs preferentially on its frayed edge sites in a low Cs concentration. Ninety-three marine sediment samples were collected near Yangnam, Korea for quantitative X-ray-diffraction (XRD), gamma-ray, and total organic carbon (TOC) analysis. Illite content was in the range of 0-23 wt.% and those of (137)Cs and TOC were minimum detectable activity (MDA) approximately 7.19 Bq/kg-dry and approximately 3.32%, respectively. The illite content in the marine sediment showed a good relationship with the (137)Cs content (R(2)=0.69), but with an increase in the illite content, the relationship became less linear. This trend can be clearly shown in two groups of samples with different size fractions (< and >5Mdvarphi). For the samples of larger particle sizes (low contents of illite), the relationship is linear, but for the samples of the smaller particle sizes (high illite content) it is less linear with a decreased slope, indicating that increase in illite content does not significantly contribute to the fixation of (137)Cs in marine sediment. Rather, the TOC has a more linear relationship with (137)Cs content with no slope change in all particle size ranges. This may indicate that humic materials in marine sediment block the access of (137)Cs to the frayed edge site and reduces the adsorption of (137)Cs on illite and that the organic materials in marine sediment play more important roles in adsorbing Cs than illite.     

A real-time, interactive steering environment for integrated ground water modeling

We present in this note an innovative software environment, called Interactive Ground Water (IGW), for unified deterministic and stochastic ground water modeling. Based on efficient computational algorithms, IGW allows simulating three-dimensional (3D) unsteady flow and transport in saturated media subject to systematic and "random" stresses and geological and chemical heterogeneity. Adopting a new computing paradigm, IGW eliminates the fragmentation in the traditional modeling schemes and allows fully utilizing today's dramatically increased computing power. For many problems, IGW enables real-time modeling, visualization, mapping, and analysis. The software environment functions as a "numerical laboratory" in which an investigator may freely explore the following: creating visually an aquifer system of desired configurations, interactively applying stresses and boundary conditions, and then investigating and visualizing on the fly the geology and flow and transport dynamics. At any time, a researcher can pause to interact dynamically with virtually any aspects of the modeling process and then resume the integrated visual exploration; he or she can initiate, pause, or resume particle tracking, plume modeling, subscale modeling, stochastic modeling, monitoring, and budget analyses. IGW continually provides results that are dynamically processed, overlaid, and displayed. It dynamically merges modeling inputs and outputs into composite two-dimensional/3D images-integrating related data to provide a more complete view of the complex interplay among the geology, hydrology, flow system, and transport. These unique capabilities of real-time modeling, steering, analysis, and mapping expand the utility of models as tools for research, education, and professional investigations.     

An Excel macro for generating trilinear plots

This computer note describes a method for creating trilinear plots in Microsoft Excel. Macros have been created in MS Excel's internal language: Visual Basic for Applications (VBA). A simple form has been set up to allow the user to input data from an Excel worksheet. The VBA macro is used to convert the triangular data (which consist of three columns of percentage data) into X-Y data. The macro then generates the axes, labels, and grid for the trilinear plot. The X-Y data are plotted as scatter data in Excel. By providing this macro in Excel, users can create trilinear plots in a quick, inexpensive manner.     

地电化学法勘查深部矿体的实际应用

地球化学方法勘查深部矿体已引起了全球的兴趣。本文作者以其２０年的勘查经历了探讨了各种地电化学方法的优缺点。