SCALE MODEL ELECTROMAGNETIC RESPONSE TO INLINE AND BROADSIDE SYSTEMS AT SKEW TRAVERSES OF A DIPPING HALF PLANE EMBEDDED IN A CONDUCTING HOST ROCK*

Laboratory scale model experiments have been performed to obtain the electromagnetic response of a finitely conducting half plane embedded in resistive/conductive surrounding and excited by an oscillating magnetic dipole. Inphase and quadrature profiles are presented for two horizontal coplanar transmitter-receiver systems (inline and broadside) for normal and skew traverses and for different dips of the conductor. It is observed that the broadside system is more diagnostic in delineating the strike and dip of the conductor and is more sensitive to the conducting host rock. The broadside profile over a vertical or dipping half plane is characterized, when traversing perpendicular to strike, by two positive peaks flanking a zero response when the coils are over the top edge of the conductor. For skew traverses a negative peak replaces the zero response. An increasing asymmetry in the anomalies is caused by changing the dip of the conductor from the vertical in both the systems, but it is more pronounced for the broadside system. The quadrature response in the broadside system changes in a characteristic way when the target is surrounded by a conducting host rock. The comparative results of the two systems may, therefore, be useful in the induction prospecting for ore deposits approximated by a half plane, especially in delineating the strike, dip, and effect of conductive host rock.     

A PORTABLE PROTON PRECESSION MAGNETOMETER*

The paper describes a transistorised, portable proton precession magnetometer constructed for surface geophysical prospecting. Constructional and circuit details are furnished. The readout of the instrument is digital. The accuracy of measurement is ± 1 part in 20,000. The maximum gradient of the total field under which a satisfactory measurement can be made is about 1 gamma/cm. The sensing head uses a single coil system with distilled water as the proton sample.     

CHARACTERIZATION OF MAJOR,MINOR AND TRACE ELEMENTS IN SIX CCRMP (TDB-1, WGB-1, UMT-1, WPR-1, WMG-1 AND WMS-1) AND ONE IWG (ZW-C) GEOCHEMICAL CANDIDATE REFERENCE MATERIALS*

Elemental compostions of six CCRMP (TDB-1, WGB-1, UMT-1, WPR-1, WMG-1 and WMS-1) and one IWG (ZW-C) geochemical candidate reference materials were determined by XRF, ICP-AES, ICP-MS, GFAAS and other modern instrumental techniques. Inter-method results compared favourably in the case of elements for which multiple data were available.     

Controls on sedimentation in distal margin palaeovalleys in the Early Tertiary Alpine foreland basin, south-eastern France

The influence of palaeodrainage characteristics, palaeogeography and tectonic setting are rarely considered as controls on stratigraphic organization in palaeovalley or incised valley systems. This study is an examination of the influence of source region vs. downstream base level controls on the sedimentary architecture of a set of bedrock-confined palaeovalleys developed along the distal margin of the Alpine foreland basin in south-eastern France. Three distinct facies associations are observed within the palaeovalley fills. Fluvial facies association A is mainly dominated by poorly sorted, highly disorganized, clast-to-matrix-supported cobble-to-boulder conglomerates that are interpreted as streamflood deposits. Facies association B comprises mainly yellow siltstones and is interpreted as recording deposition in an estuarine basin environment. Estuarine marine facies association C comprises interstratified estuarine siltstones and clean, well-sorted washover sandstones. The sedimentary characteristics of the valley fill successions are related to the proximity of depositional sites to sediment source areas. Palaeovalleys located proximal to structurally controlled basement palaeohighs are entirely dominated by coarse fluvial streamflood deposits. In contrast, distal palaeovalley segments, which are located several kilometres downstream, contain successions showing upward transition from coarse fluvial facies into estuarine central basin fines, and finally into estuarine-marginal marine facies. Facies distributions suggest that the fluvial deposits form wedge-shaped, downstream-thinning sediment bodies, whereas the estuarine deposits form an upstream-thinning wedge. The vertical stacking of fluvial to estuarine to marginal marine depositional environments records the fluvial aggradation and subsequent transgression of relatively small bedrock-confined river valleys, which drained a rugged, upland terrain. Facies geometries suggest that a fluvial sediment wedge initially prograded downvalley, in response to high bed load sediment yields. Subsequently, palaeovalleys became drowned during the passage of a marine transgression, with the establishment of estuarine conditions. Initial fluvial aggradation and subsequent marine flooding of the palaeovalleys is a consequence of the interaction of high local rates of sediment supply and relative sea-level rise driven by flexural subsidence of the basin.     

ORDERED PEAK STATISTICS THROUGH DIGITAL SIMULATION

A detailed knowledge of the seismic response time history in the form of the first, second, third, … largest peak amplitudes is useful to understand the progressive damage in a structure. This information is however not available from the conventionally used response spectra. This paper provides a formulation of the statistics of these higher order peaks by proposing a digitally simulated joint density function for the peaks in a stationary, Gaussian process. A digital experimentation has been done by generating an ensemble of the single-degree-of-freedom oscillator response to several artificial accelerograms, and the corresponding ordered peak distributions have been found to be in close agreement with the predictions based on the formulation in this paper. The peak factors based on the proposed formulation have also been compared with those from the existing formulations based on the Markov theory and on the assumption of peak independence. It has been found that whereas the peak factors from the proposed and Markovian formulations are compatible, the assumption of independence may give reasonable estimates only for the first few orders of peaks.     

PROPAGATION OF TORSIONAL SURFACE WAVES IN A HOMOGENEOUS SUBSTRATUM OVER A HETEROGENEOUS HALF-SPACE

The paper discusses the propagation of torsional surface wave in a homogeneous substratum over a half-space with linearly varying rigidity and density. The study reveals that under assumed conditions, a torsional surface wave propagates in the medium. The velocities of torsional surface waves have been calculated numerically and are presented in a number of graphs. It is also observed that for a stratum over a homogeneous half-space, the velocity of torsional surface waves coincides with that of Love waves. For a non-homogeneous half-space it is observed that the velocity of torsional surface waves is always higher than that of Love waves propagated in a homogeneous layer over a homogeneous half-space. An attempt is also made to assess the possible propagation of torsional surface waves in a half-space with linearly varying rigidity and density, lacking a superficial layer. It is concluded that such a half-space allows two solutions for torsional waves while a homogeneous half-space has one.     

DIKE FORMATION WITH SUBMERGED VANE

1 INTRODUCTION Increasing capital costs, emerging environmental concerns and rising maintenance expenses of conventional river training works around the world have led to the development of submerged vanes in practice. Submerged vanes are being favoured f…     

PROPAGATION OF RAYLEIGH WAVES IN A HETEROGENEOUS INCOMPRESSIBLE SUBSTRATUM OVER A HOMOGENEOUS INCOMPRESSIBLE HALF-SPACE

The paper studies the propagation of Rayleigh waves in an incompressible layer with general variation of rigidity as μ=μ₀(1+bz)^m resting over a homogeneous incompressible elastic half-space. Instead of using the Whittaker function, the expansion formula proposed by Newlands has been used for better results at shallow depths. As a particular case for m=1, the results have been shown to coincide with those obtained by Newlands. The velocities have been computed for different values of m and the results are presented in graphs.     

Spatial Variability of Mass Movements in the Satluj Valley,Himachal Pradesh during 1990～2006

Satluj Valley is known to have a history of landslides and related mass movement activities since the geological times.Geological and geomorphological settings combined with anthropogenic activities constitute a propensity towards slope failure.During the last two decades.the area witnessed substantial increase in athropogenic pressure,mainly due to the exploitation of hydropower potential,changing landuse pattern and population growth.In addition,a shift of the climatic Datterns in the form of larger area falling under the influence of rains was observed.These natural as well as anthropogenic changes in the area have resulted in increased spatial coverage of landslide in the area.This paper documents these changes during 1990～2006.     

Bacterial response to contrasting sediment geochemistry in the Central Indian Basin

In order to investigate whether geochemical, physiographic and lithological differences in two end‐member sedimentary settings could evoke varied microbe–sediment interactions, two 25 cm long sediment cores from contrasting regions in the Central Indian Basin have been examined. Site TVBC 26 in the northern siliceous realm (10°S, 75·5°E) is organic‐C rich with 0·3 ± 0·09% total organic carbon. Site TVBC 08 in the southern pelagic red clay realm (16°S, 75·5°E), located on the flank of a seamount in a mid‐plate volcanic area with hydrothermal alterations of recent origin, is organic‐C poor (0·1 ± 0·07%). Significantly higher bacterial viability under anaerobic conditions, generally lower microbial carbon uptake and higher numbers of aerobic sulphur oxidizers at the mottled zones, characterize core TVBC 26. In the carbon‐poor environment of core TVBC 08, a doubling of the ¹⁴C uptake, a 250 times increase in the number of autotrophic nitrifiers, a four‐fold lowering in the number of aerobic sulphur oxidizers and a higher order of denitrifiers exists when compared with core TVBC 26; this suggests the prevalence of a potentially autotrophic microbial community in core TVBC 08 in response to hydrothermal activity. Microbial activity at the northern TVBC 26 is predominantly heterotrophic with enhanced chemosynthetic activity restricted to tan‐green mottled zones. The southern TVBC 08 is autotrophic with increased heterotrophic activity in the deepest layers. Notably, the bacterial activity is generally dependent on the surface productivity in TVBC 26, the carbon‐rich core, and mostly independent in TVBC 08, the carbon‐poor, hydrothermally influenced core. The northern sediment is more organic sink‐controlled and the southern sediment is more hydrothermal source‐controlled. Hydrothermal activity and associated rock alteration processes may be more relevant than organic matter delivery in these deep‐sea sediments. Thus, this study highlights the relative importance of hydrothermal activity versus organic delivery in evoking different microbial responses in the Central Indian Basin sediments.