Uranium and thorium series nuclides in oriented ferromanganese nodules: growth rates,turnover times and nuclide behavior

Three ferromanganese nodules handpicked from the tops of 2500 cm² area box cores taken from the north equatorial Pacific have been analysed for their U-Th series nuclides.²³⁰Th_exc concentrations in the surface 1–2 mm of the top side of the nodules indicate growth rates of 1.8–4.6 mm/10⁶ yr. In two of the nodules a significant discontinuity in the²³⁰Th_exc depth profile has been observed at ～0.3 m.y. ago, suggesting that the nodule growth has been episodic. The concentration profiles of²³¹Pa_exc (measured via²²⁷Th) yield growth rates similar to the²³⁰Th_exc data. The bottom sides of the nodules display exponential decrease of²³⁰Th_exc/²³²Th activity ratio with depth, yielding growth rates of 1.5–3.3 mm/10⁶ yr.The²³⁰Th_exc and²³¹Pa_exc concentrations in the outermost layer of the bottom face are significantly lower than in the outermost layer of the top face. Comparison of the extrapolated²³⁰Th_exc/²³²Th and²³⁰Th_exc/²³¹Pa_exc activity ratios for the top and bottom surfaces yields an “age” of (5?15) × 10⁴ yr for the bottom relative to the top. This “age” most probably represents the time elapsed since the nodules have attained the present orientation.The²¹⁰Pb concentration in the surface ～0.1 mm of the top side is in large excess over its parent²²⁶Ra. Elsewhere in the nodule, up to ～1 mm depth in both top and bottom sides,²¹⁰Pb is deficient relative to²²⁶Ra, probably due to²²²Rn loss. The absence of²¹⁰Pb_exc below the outermost layer of the top face rules out the possibility of a sampling artifact as the cause of the observed exponentially decreasing²³⁰Th_exc and²³¹Pa_exc concentration profiles. The flux of²¹⁰Pb_exc to the nodules ranges between 0.31 and 0.58 dpm/cm² yr. The exhalation rate of²²²Rn, estimated from the²²⁶Ra-²¹⁰Pb disequilibrium is ～570 dpm/cm² yr from the top side and >2000 dpm/cm² yr from the bottom side.²²⁶Ra is deficient in the top side relative to²³⁰Th up to ～0.5–1 mm and is in large excess throughout the bottom. The data indicate a net gain of²²⁶Ra into the nodule, corresponding to a flux of (24?46) × 10^?3 dpm/cm² yr. On a total area basis the gain of²²⁶Ra into the nodules is <20% of the²²⁶Ra escaping from the sediments. A similar gain of²²⁸Ra into the bottom side of the nodules is reflected by the high²²⁸Th/²³²Th activity ratios observed in the outermost layer in contact with sediments.     

Bol’shakovskii gabbro massif as a fragment of the Southern Urals zone of Early Carboniferous rift

In this paper new data on the absolute age and geochemistry of rocks of the Bol’shakovskii massif, situated in the central part of the Aramil-Sukhteli zone of the Southern Urals, are given. The obtained values are evidence for its Visean age. By the geological-petrographic and petro- and geochemical features, the rocks of the Bol’shakovskii complex differ sharply from ophiolite-type gabbroids, although they reveal a substantial similarity with the gabbro-granite formation of the Magnitogorsk megazone. The Bol’shakovskii massif is situated in the northern branch of the South Urals zone of Early Carboniferous riftogenesis; and its formation is most probably associated with magmatism events during the rift regime in the died_out island arc.     

Digital Image Based Approach for Three-Dimensional Mechanical Analysis of Heterogeneous Rocks

Summary This paper presents a digital image based approach for three-dimensional (3-D) numerical simulation and failure analysis of rocks by taking into account the actual 3-D heterogeneity. Digital image techniques are adopted to extract two-dimensional (2-D) material heterogeneity from material surface images. The 2-D image mesostructures are further extrapolated to 3-D cuboid mesostructures by assuming the material surface as a representation of the inner material heterogeneity within a very small depth. The iterative milling and scanning system is set up to generate the 3-D rock mesostructures. A Hong Kong granite specimen is used as an example to demonstrate the procedure of 3-D mesostructure establishment. The mechanical responses and failure process under the conventional Brazilian tensile test condition are examined through numerical analyses. The stress distribution, crack propagation process and failure model of heterogeneous material cases are simulated with a finite difference software. The numerical results indicate that material heterogeneity plays an important role in determining the failure behavior of rocks under external loading.     

Stationary magnetospheric convection on November 24, 1981. 1. A case study of “pressure gradient/minimum-B” auroral arc generation

We present two case studies in the night and evening sides of the auroral oval, based on plasma and field measurements made at low altitudes by the AUREOL-3 satellite, during a long period of stationary magnetospheric convection (SMC) on November 24, 1981. The basic feature of both oval crossings was an evident double oval pattern, including (1) a weak arc-type structure at the equatorial edge of the oval/polar edge of the diffuse auroral band, collocated with an upward field-aligned current (FAC) sheet of ≈1.0 μA m⁻², (2) an intermediate region of weaker precipitation within the oval, (3) a more intense auroral band at the polar oval boundary, and (4) polar diffuse auroral zone near the polar cap boundary. These measurements are compared with the published magnetospheric data during this SMC period, accumulated by Yahnin et al. and Sergeev et al., including a semi-empirical radial magnetic field profile B_Z in the near-Earth neutral sheet, with a minimum at about 10–14 R_E. Such a radial B_Z profile appears to be very similar to that assumed in the “minimum B/cross-tail line current” model by Galperin et al. (GVZ92) as the “root of the arc”, or the arc generic region. This model considers a FAC generator mechanism by Grad-Vasyliunas-Boström-Tverskoy operating in the region of a narrow magnetic field minimum in the near-Earth neutral sheet, together with the concept of ion non-adiabatic scattering in the “wall region”. The generated upward FAC branch of the double sheet current structure feeds the steady auroral arc/inverted-V at the equatorial border of the oval. When the semi-empirical B_Z profile is introduced in the GVZ92 model, a good agreement is found between the modelled current and the measured characteristics of the FACs associated with the equatorial arc. Thus the main predictions of the GVZ92 model concerning the “minimum-B” region are consistent with these data, while some small-scale features are not reproduced. Implications of the GVZ92 model are discussed, particularly concerning the necessary conditions for a substorm onset that were not fulfilled during the SMC period.     

Effect of common point selection on coordinate transformation parameter determination

The use of satellite positioning techniques commonly requires a transformation from a Conventional Terrestrial coordinate system to a Geodetic coordinate system, or vice versa. For such a transformation, the main problem is the determination of transformation parameters between these coordinate systems. The transformation parameters are estimated by a least-squares process using “common” points, i.e., those points whose coordinates are known in both systems. Therefore, the precision of so estimated transformation parameters is closely related to certain characteristics of the common points. In this contribution, we have formulated some theoretical relations between the transformation parameters and the number and the distribution of common points, and corroborated the theoretical results numerically, using a simulated geodetic network.