Key Design Elements of Building Pressure Cycling for Evaluating Vapor Intrusion—A Literature Review

Building pressure cycling (BPC) is becoming an increasingly important tool for studying vapor intrusion. BPC has been used to distinguish subslab and indoor sources of vapor intrusion as well as to define reasonable worst case volatile organic compound mass discharge into a structure. Analyses have been performed both semi-quantitatively with concentration trends and quantitatively with more rigorous flux calculation and source attribution methods. This paper reviews and compares the protocols and outcomes from multiple published applications of this technology to define the key variables that control performance. Common lessons learned are identified, including those that help define the range of building size and type to which BPC is applicable. Differences in test protocols are discussed, recognizing that the complexity of the test protocol required depends on the particular objectives of each project. Research gaps are identified and tabulated for future validation studies and applications.     

Experiments on steady buoyancy transfer through turbulent fluid layers separated by density interfaces

A laboratory experiment was performed to investigate mixing across a density interface which separates two turbulent fluid layers and coexists with a stabilizing buoyancy flux. It was found that the buoyancy flux (q₀) across the interface and through the turbulent layers (of depth D) becomes steady and constant in magnitude in the vertical direction, only when , where u is the horizontal r.m.s. velocity at the base of the mixed layers. The results suggest that mixing across the density interface is controlled by a dynamically important buoyancy gradient induced in the turbulent layers and that parameters such as the bulk Richardson number, , where Δb is the interfacial buoyancy jump, are of secondary importance. Measurements are used to infer the mixing mechanism at the interface, the mixing efficiency of stratified fluids and the entrainment law. Some geophysical applications of the results are also discussed.     

The relation between rigorous and Helmert’s definitions of orthometric heights

Following our earlier definition of the rigorous orthometric height [J Geod 79(1-3):82–92 (2005)] we present the derivation and calculation of the differences between this and the Helmert orthometric height, which is embedded in the vertical datums used in numerous countries. By way of comparison, we also consider Mader and Niethammer’s refinements to the Helmert orthometric height. For a profile across the Canadian Rocky Mountains (maximum height of ~2,800 m), the rigorous correction to Helmert’s height reaches ~13 cm, whereas the Mader and Niethammer corrections only reach ~3 cm. The discrepancy is due mostly to the rigorous correction’s consideration of the geoid-generated gravity disturbance. We also point out that several of the terms derived here are the same as those used in regional gravimetric geoid models, thus simplifying their implementation. This will enable those who currently use Helmert orthometric heights to upgrade them to a more rigorous height system based on the Earth’s gravity field and one that is more compatible with a regional geoid model.     

Influence of salinity on permeability characteristics of marine sediments

Abstract

Laboratory tests were conducted on compacted marine sediments to study the effect of salt concentration of permeating fluid on its permeability characteristics. Deep sea sediment samples were collected from water depths varying from 3700 to 4500 m off Mauritius coast. Liquid limit and plasticity index varied widely from 45 to 75 and 10 to 35, respectively. Permeability was found at different void ratios with distilled water and 0.2, 0.4, and 0.8 N NaCl solutions as permeating fluid. It was found that permeability increases with an increase in salt concentration for a given void ratio. This is explained by diffused double layer theory. Also, the rate of increase in permeability decreases with increase in salt concentration. The effect of salt concentration seemed to be less at higher void ratios.     

A Multiple Flare Scenario where the Classic Long-Duration Flare Was Not the Source of a CME

A series of flares (GOES class M, M and C) and a CME were observed in close succession on 20 January 2004 in NOAA 10540. Radio observations, which took the form of types II, III and N bursts, were associated with these events. We use the combined observations from TRACE, EIT, Hα images from Kwasan, MDI magnetograms and GOES to understand the complex development of this event. Contrary to a standard interpretation, we conclude that the first two impulsive flares are part of the CME launch process while the following long-duration event flare represents simply the recovery phase. Observations show that the flare ribbons not only separate but also shift along the magnetic inversion line so that magnetic reconnection progresses stepwise to neighboring flux tubes. We conclude that “tether cutting” reconnection in the sheared arcade progressively transforms it to a twisted flux tube, which becomes unstable, leading to a CME. We interpret the third flare, a long-duration event, as a combination of the classical two-ribbon flare with the relaxation process following forced reconnection between the expanding CME structure and neighboring magnetic fields. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Numerical simulations of protostellar encounters — II. Coplanar disc–disc encounters

It is expected that an average protostar will undergo at least one impulsive interaction with a neighbouring protostar whilst a large fraction of its mass is still in a massive, extended disc. Such interactions must have a significant impact upon the evolution of the protostars and their discs.   We have carried out a series of simulations of coplanar encounters between two stars, each possessing a massive circumstellar disc, using an SPH code that models gravitational, hydrodynamic and viscous forces. We find that during a coplanar encounter, disc material is swept up into a shock layer between the two interacting stars, and the layer then fragments to produce new protostellar condensations. The truncated remains of the discs may subsequently fragment; and the outer regions of the discs may be thrown off to form circumbinary disc-like structures around the stars. Thus coplanar disc–disc encounters lead efficiently to the formation of multiple star systems and small- N clusters, including substellar objects.