Tectonic evolution of the southern Gawler Craton,South Australia,from electromagnetic sounding

Long-period natural-source electromagnetic data have been recorded using portable three-component magnetometers at 39 sites in 1998 and 2002 across the southern Eyre Peninsula, South Australia that forms part of the Gawler Craton. Site spacing was of order 5 km, but reduced to 1 km or less near known geological boundaries, with a total survey length of approximately 50 km. A profile trending east – west was inverted for a 2D electrical resistivity model to a depth of 20 km across the southern Eyre Peninsula. The main features from the models are: (i) on the eastern side of the Gawler Craton, the Donington Suite granitoids to the east of the Kalinjala Shear Zone are resistive (>1000 Ωm); (ii) the boundary between the Donington Suite granitoids and the Archaean Sleaford Complex, which has much lower resistivity of 10 – 100 Ωm, is almost vertical in the top 10 km and dips slightly westwards; and (iii) two very low resistivity (<1 Ωm) arcuate zones in the top 3 km of Hutchison Group sediments correlate with banded iron-formations, and are probably related to biogenic-origin graphite deposits concentrated in fold hinges. Such features suggest an extensional regime during the time period 2.00 – 1.85 Ga. We suggest that the resistivity boundary between the Donington Suite and the Archaean Sleaford Complex represents a growth fault, typical for rift systems that evolve into a half-graben structure. In the graben basin, low-resistivity shallow-marine Hutchison Group sediments were deposited. Folding of the sediments during the Kimban Orogeny between 1.74 and 1.70 Ga has led to migration of graphite to the fold hinges resulting in linear zones of very low resistivity that correlate with banded iron-formation magnetic anomalies.     

The seismic hazard assessment of the Dead Sea rift, Jordan

The Dead Sea fault system and its branching faults represent one of the most tectonically active regions in the Middle East. The aim of this study is to highlight the degree of hazards related to the earthquake activities associated with the Dead Sea rift, in terms of speculating the possible future earthquakes. The present investigation mainly is based on available data and vertical crustal modeling of Jordan and the Dead Sea model for the Dead Sea basin with particular emphasis of the recent earthquake activities, which occurred on December 31st, 2003 (Mc = 3.7), February 11th, 2004 (strongest Mc = 4.9 R), and March 15th, 2004 (Mc = 4). The present research examines the location of the strong events and correlates them with the various tectonic elements in the area. The source mechanism of the main shock and the aftershock events is also examined. The analyses were based on the available short period seismogram data, which was recorded at the Natural Resources Authority of Jordan, Seismological Observatory. The seismic energy appears to have migrated from the south to the north during the period from December 31st up to March 12th, where the released seismic energy showed a migration character to the southern block of the eastern side of the Dead Sea, which led the seismic event to occur on March 15th.     

Cotton yield prediction through spectral parameters

To predict the crop yield from spectral parameters, a field experiment was conducted on cotton crop during 1997-98 Kharif season on a sandy loam soil at the Punjab Agricultural Unjversity, Ludhiana. India. Spectral reflectance and agronomic measurements were made for cotton species (American and Desi cotton), sown on two dates (May 1 and May 29) under five nitrogen levels (0, 40, 80, 120 and 160 kg/ha). Regression analysis showed that growth variables had poor correlation with seed cotton yield for all three models, however, yield attributes were significantly and highly correlated for second degree model with seed cotton yield. The integrated Radiance Ratio (RR) and Normalized Difference Vegetation Index (NDVI) measured over time were significantly correlated quadratically with seed cotton yield on three time segment periods viz., 81–110, 111–140 and 141–200 DAS, but highest correlation values were obtained during 81–110 DAS, In American cotton, the highest correlation coefficient for RR and NDVI were 0.91 and 0.81, respectively; whereas for Desi cotton these values were 0.88 and 0.84, respectively.     

The shape of spiral arms

The response by a gaseous disc to perturbations is investigated. Spectral analysis of the resulting pattern indicates that information about the nature of the perturber is maintained only if the perturbation is strong.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 September–6 October, 1984.     

New insights into rare earth element (REE) particulate generated by cigarette lighters: an electron microscopy and materials science investigation of a poorly understood indoor air pollutant and constraints for urban geochemistry

Cigarette smoking is a well-recognized cause of lung cancer and other diseases and is a major contributor to indoor air pollution in numerous settings worldwide. Most cigarette lighters use rare earth element (REE) mischmetal in their flints in order to aid ignition, and these lighters thus have pyrophoric properties. REE particulate emitted from these lighters presents a complexity in the role of health of smokers that has yet to be explored fully. Furthermore, these particles are likely present in numerous urban settings and contribute to the complexities of urban geochemistry. Details of the material properties of rare earth element (REE) particulate derived from smoking lighters are determined first the first time. Particulate was investigated using back-scatter detection scanning electron microscopy techniques and transmission electron microscopy techniques. Several particle types were observed and demonstrate a diverse range of size and textures, many of which are previously not documented and are much smaller than previous basic scanning electron microscopy investigations. These include irregularly shaped fragments of mischmetal, micrometer-scale spherules, aggregates of nanospherules, and platy sponge-like nanoparticles. All of these particles have significant REE content, and most are of a particle size that can be deposited deep in the lung. The available literature regarding toxicity of REEs and the material science data presented here argues very strongly for cause for concern.     

A strontium,neodymium and oxygen isotope study of hydrothermal metamorphism and crustal anatexis in the Trois Seigneurs Massif,Pyrenees, France

Nd, Sr, and O isotope analyses have been made on metamorphic and igneous rocks and minerals from a 310–340 Ma Hercynian-age metamorphic terrane in the Pyrenees, France. Lower Paleozoic shales and phyllites have ⁸⁷Sr/⁸⁶Sr values of 0.707–0.717 at 310 Ma, but model values at 310 Ma of 0.709–0.736 (based on assumed depositional age of 450 Ma and an initial ⁸⁷Sr/⁸⁶Sr=0.707). On a regional scale, ⁸⁷Sr/⁸⁶Sr was homogenized to about 0.713 to 0.717 in the higher-grade pelitic schists during metamorphism. Much of this ⁸⁷Sr/⁸⁶Sr exchange occurred at very low grades (below the biotite isograd), but significant changes also accompanied the δ ¹⁸O lowering of the phyllites (+13 to +16) during their transformation to andalusite- and sillimanite-grade schists (δ ¹⁸O=+11 to +12); all of these effects are attributed to pervasive interactions with hydrothermal fluids (Wickham and Taylor 1985). The data also show that a syn-metamorphic plutonic complex, dominated by a biotite granite body, was derived by mixing of a relatively mafic magmatic end-member (⁸⁷Sr/⁸⁶Sr～ 0.7025–0.7050 and δ ¹⁸O～ +7.5 to +8.0) with two metasedimentary sources, both having ⁸⁷Sr/⁸⁶Sr～0.715 and δ ¹⁸O～ +10.0 to +12.0, but with one being more homogeneous than the other. The more homogeneous component and the (mantle-derived?) magmatic end-member dominate at low structural levels within the complex. The less homogeneous end-member that dominates at high levels is clearly derived from the local Paleozoic pelitic schists. A Rb-Sr age of 330±20 Ma was obtained on hornblende from a deep level within the complex, which fixes this age for the regional metamorphism, as well. Although a post-metamorphic granodiorite magma body at Trois Seigneurs also displays heterogeneities in δ ¹⁸O and ⁸⁷Sr/⁸⁶Sr (and thus does not give a clear-cut Rb-Sr isochron), the data are consistent with an emplacement age between 260 and 310 Ma, similar to ages of other late granodiorites in the Pyrenees. ¹⁴³Nd/ ¹⁴⁴Nd is very uniform within the Hercynian crust, both at Trois Seigneurs (? _Nd=?3 to ?7) and elsewhere in the Pyrenees; almost all igneous lithologies have depleted-mantle, mid-Proterozoic model ages, consistent with efficient recycling of crustal material following original crustal accretion in this area at about 1600 Ma or earlier. Rb-Sr mineral ages exhibit a complex cooling history reflecting late Hercynian and Mesozoic thermal events. Our results show that profound homogenization of the ⁸⁷Sr/⁸⁶Sr and ¹⁸O/¹⁶O ratios of large volumes of the crust can occur during regional metamorphism and crustal anatexis, particularly in regions undergoing extensional tectonics. Such processes can significantly modify the isotopic compositions of the protoliths of granitic magmas; this may explain why many peraluminous Hercynian granitoids of Western Europe have anomalously low (⁸⁷Sr/⁸⁶Sr) initial values compared to their probable sedimentary parent rocks.     

Characteristics of magnetic and non-magnetic lag in the Cobar area, NSW

Geochemical patterns from two lag anomalies in the Cobar region of central New South Wales are described. The region is semi-arid, deeply weathered and some areas are covered by variable thicknesses of aeolian and alluvial transported overburden.Lag morphology and mineralogy are related to landform. In erosional landforms the surface is covered by lag, which is composed of coarse fragments derived locally from bedrock and displays varying degrees of ferruginization, together with a range of secondary pisoids. In depositional landforms the lag is less abundant and contains more pisoids. Deflation by sheetwash may lead to lag being partially buried by alluvium. In a large proportion of pisoid lag, hematite and goethite have been converted to maghemite, allowing ready separation into magnetic and non-magnetic fractions. The non-magnetic fraction is dominated by the lithic lag whereas the magnetic fraction is dominated by pisoid lag.The magnetic and non-magnetic components of the 2–11 mm lag fraction, milled to < 75 μm and subjected to HF-HNO₃-HClO₄ attack, give rise to distinct geochemical patterns at targets related to a variant of the Cobar style of Pb-Zn mineralization with variable silicification and to Zn mineralization in a swarm of quartz and carbonate veinlets. The patterns are influenced by metal source, lag type, surface chemical conditions and landtbrm. Differences in the correlation between metal contents in the magnetic and non-magnetic lag components, and between trace elements and Fe. indicate variable loss of Cu and Zn from the magnetic lag at some targets but retention of Pb. The presence of a readily cxtractable base metal component in the lag has implications for detecting anomalies in transported cover in the region.     

Adsorption of hexavalent chromium onto activated carbon derived from <Emphasis Type="Italic">Leucaena leucocephala</Emphasis> waste sawdust: kinetics,equilibrium and thermodynamics

The adsorptive removal of Cr(VI) was studied using activated carbon derived from Leucaena leucocephala (ACLL). The physico-chemical properties of ACLL were determined using proximate analysis and N₂ BET surface area analysis. The N₂ BET surface area of ACLL was determined to be 1131 m² g^?1. The point of zero charge (pH_pzc) of 5.42 indicated that ACLL surface was positively charged for pH below the pH_PZC, attracting anions. The effect of experimental operating parameters such as time of contact, ACLL dose, pH, initial concentration and temperature was investigated. The optimum values of parameters such as concentration of 100 mg L^?1, 300 mg of ACLL dose, time of contact of 60 min, pH of 4 indicated the maximum Cr(VI) uptake of 13.85 mg g^?1. The pseudo-second-order kinetic model best fitted with the Cr(VI) adsorption data. Adsorptive removal of Cr(VI) onto ACLL satisfactorily fitted in the order of Redlich–Peterson > Freundlich > Langmuir > Temkin adsorption isotherm model. The thermodynamic parameters showed the adsorption of Cr(VI) onto ACLL was an endothermic and spontaneously occurred process.     

On radiative forcing of sulphate aerosol produced from ion-promoted nucleation mechanisms in an atmospheric global model

A significant fraction of the total number of particles present in the atmosphere is formed by nucleation in the gas phase. Nucleation and the subsequent growth process influence both number concentration of particles and their size distribution besides chemical and optical properties of atmospheric aerosols. Sulphate aerosol nucleation mechanisms promoted by ions have been evaluated here in a tropospheric interactive chemistry-aerosol module for mass and number concentration in a global atmospheric model. The indirect radiative forcing of sulphate particles is assessed in this model; indirect radiative forcing is different for ion-induced (IIN) and ion-mediated (IMN) mechanisms. The indirect radiative forcing in 10-year simulation runs has been calculated as ?1.42?W/m² (IIN) and ?1.54?W/m² (IMN). The 5% emission of primary sulphate particles in simulations changes the indirect radiative forcing from ?1.42 to ?1.44?W/m² for IIN case, and from ?1.54 to ?1.55 W/m² for the IMN case. More precisely, owing to greater nucleation rates, IMN mechanisms produces greater cooling than the IIN mechanisms in the backdrop that both mechanisms produce almost identical distribution of CDNC in their pre-industrial runs. The inclusion of primary particles in simulations with IIN and IMN mechanisms increases both CDNC and the indirect radiative forcing.