Ocean tide loading (OTL) displacements from global and local grids: comparisons to GPS estimates over the shelf of Brittany, France

In this paper we examine OTL displacements detected by GPS stations of a dedicated campaign and validate ocean tide models. Our area of study is the continental shelf of Brittany and Cotentin in France. Brittany is one of the few places in the world where tides provoke loading displacements of ∼10–12 cm vertically and a few cm horizontally. Ocean tide models suffer from important discrepancies in this region. Seven global and regional ocean tide models were tested: FES2004 corrected for K2, TPXO.7.0, TPXO.6.2, GOT00.2, CSR4.0, NAO.99b and the most recent regional grids of the North East Atlantic (NEA2004). These gridded amplitudes and phases of ocean tides were convolved in order to get the predicted OTL displacements using two different algorithms. Data over a period of 3.5 months of 8 GPS campaign stations located on the north coast of Brittany are used, in order to evaluate the geographical distribution of the OTL effect. We have modified and implemented new algorithms in our GPS software, GINS 7.1. GPS OTL constituents are estimated based on 1-day batch solutions. We compare the observed GPS OTL constituents of M₂, S₂, N₂ and K₁ waves with the selected ocean tide models on global and regional grids. Large phase-lag and amplitude discrepancies over 20° and 1.5 cm in the vertical direction in the semi-diurnal band of M₂ between predictions and GPS/models are detected in the Bay of Mont St-Michel. From a least squares spectral analysis of the GPS time-series, significant harmonic peaks in the integer multiples of the orbital periods of the GPS satellites are observed, indicating the existence of multipath effects in the GPS OTL constituents. The GPS OTL observations agree best with FES2004, NEA2004, GOT00.2 and CSR4.0 tide models.     

A Microwave Tomographic Approach for Nondestructive Testing of Dielectric Coated Metallic Surfaces

A microwave imaging method for nondestructive testing of perfectly conducting surfaces beyond a layered media is presented. The method is an adaptation of the surface reconstruction approach by Yapar et al. to the present problem. It is based on the analytical continuation of the measured data to the surface under test through a special representation of the scattered field in terms of Fourier transform and Taylor expansion. Then the problem is reduced to the solution of a nonlinear equation which is solved iteratively via the Newton method and regularization in the least squares sense. Numerical simulations show that defects as small as lambda/500 can be recovered through the presented algorithm.     

Contextual Spatiospectral Postreconstruction of Cloud-Contaminated Images

A general method has been proposed recently for the contextual reconstruction of cloud-contaminated areas in multitemporal multispectral images. It is based on the idea of making the prediction process learn from information available in the cloud-free neighborhood of contaminated areas. Though promising, this method does not fully exploit all available information, thus leaving room for further methodological enhancements. This letter presents a postreconstruction methodology for improving the contextual reconstruction process by opportunely capturing spatial and spectral correlations characterizing the considered image. In addition, we propose a solution to a problem that has not yet been addressed in the remote sensing literature, i.e., the generation of an error map beside the reconstructed images to provide end-users with helpful indications about reconstruction reliability. Thorough experiments conducted on a multitemporal sequence of Landsat-7 ETM+ images are reported and discussed.     

Unsupervised Change Detection From Multichannel SAR Images

Multichannel synthetic aperture radar (SAR) data present a good potential for environmental monitoring and disaster management, owing both to their insensitivity to atmospheric and sun-illumination conditions, and to the improved discrimination capability they may provide as compared to single-channel SAR. However, this requires accurate and possibly automatic techniques to generate change maps from multichannel SAR images acquired from the same geographic area at different times. In this letter, an automatic unsupervised contextual change-detection method is proposed for two-date multichannel SAR images, by integrating a SAR-specific extension of the Fisher transform with a variant of the expectation-maximization algorithm and with Markov random fields. The method is validated by experiments on SIR-C/XSAR data     

Testing satellite and ground thermal imaging of low-temperature fumarolic fields: The dormant Nisyros Volcano (Greece)

The Nisyros Volcano (Greece) was monitored by satellite and ground thermal imaging during the period 2000–2002. Three night-scheduled Landsat-7 ETM⁺ thermal (band 6) images of Nisyros Island were processed to obtain land surface temperature. Ground temperature data were also collected during one of the satellite overpasses. Processed results involving orthorectification and 3-D atmospheric correction clearly show the existence of a thermal anomaly inside the Nisyros Caldera. This anomaly is associated mainly with the largest hydrothermal craters and has land surface temperatures 5–10 °C warmer than its surroundings. The ground temperature generally increased by about 4 °C inside the main crater over the period 2000–2002. Ground thermal images of the hydrothermal Stephanos Crater were also collected in 2002 using a portable thermal infrared camera. These images were calibrated to ground temperature data and orthorectified. A difference of about 0–2 °C was observed between the ground thermal images and the ground temperature data. The overall study demonstrates that satellite remote sensing of low-temperature fumarolic fields within calderas can provide a reliable long-term monitoring tool of dormant volcanoes that have the potential to reactivate. Similarly, a portable thermo-imager can easily be deployed for real-time monitoring using telemetric data transfer. The operational costs for both systems are relatively low for an early warning system.     

GPS sidereal filtering: coordinate- and carrier-phase-level strategies

Multipath error is considered one of the major errors affecting GPS observations. One can benefit from the repetition of satellite geometry approximately every sidereal day, and apply filtering to help minimize this error. For GPS data at 1 s interval processed using a double-difference strategy, using the day-to-day coordinate or carrier-phase residual autocorrelation determined with a 10-h window leads to the steadiest estimates of the error-repeat lag, although a window as short as 2 h can produce an acceptable value with > 97% of the optimal lag’s correlation. We conclude that although the lag may vary with time, such variation is marginal and there is little advantage in using a satellite-specific or other time-varying lag in double-difference processing. We filter the GPS data either by stacking a number of days of processed coordinate residuals using the optimum “sidereal” lag (23 h 55 m 54 s), and removing these stacked residuals from the day in question (coordinate space), or by a similar method using double-difference carrier-phase residuals (observational space). Either method results in more consistent and homogeneous set of coordinates throughout the dataset compared with unfiltered processing. Coordinate stacking reduces geometry-related repeating errors (mainly multipath) better than carrier-phase residual stacking, although the latter takes less processing time to achieve final filtered coordinates. Thus, the optimal stacking method will depend on whether coordinate precision or computational time is the over-riding criterion.     

Analysis of Seasonal Variability of Vegetation and Methane Concentration over India using SPOT-VEGETATION and ENVISAT-SCIAMACHY Data

This paper highlights the spatial and temporal variability of atmospheric columnar methane (CH₄) concentration over India and its correlation with the terrestrial vegetation dynamics. SCanning IMaging Absorption spectrometer for Atmospheric CHartographY (SCIAMACHY) on board ENVIronmental SATellite (ENVISAT) data product (0.5° × 0.5°) was used to analyze the atmospheric CH₄ concentration. Satellite Pour l'Observation de la Terre (SPOT)-VEGETATION sensor’s Normalized Difference Vegetation Index (NDVI) product, aggregated at 0.5° × 0.5° grid level for the same period (2004 and 2005), was used to correlate the with CH₄ concentration. Analysis showed mean monthly CH₄ concentration during the Kharif season varied from 1,704 parts per billion volume (ppbv) to 1,780 ppbv with the lowest value in May and the highest value in September. Correspondingly, mean NDVI varied from 0.28 (May) to 0.53 (September). Analysis of correlation between CH₄ concentration and NDVI values over India showed positive correlation (r = 0.76; n = 6) in Kharif season. Further analysis using land cover information showed characteristic low correlation in natural vegetation region and high correlation in agricultural area. Grids, particularly falling in the Indo-Gangetic Plains showed positive correlation. This could be attributed to the rice crop which is grown as a predominant crop during this period. The CH₄ concentration pattern matched well with growth pattern of rice with the highest concentration coinciding with the peak growth period of crop in the September. Characteristically low correlation was observed (r = 0.1; n = 6) in deserts of Rajasthan and forested Himalayan ecosystem. Thus, the paper emphasizes the synergistic use of different satellite based data in understanding the variability of atmospheric CH₄ concentration in relation to vegetation.     

Comparison of Two Data Smoothing Techniques for Vegetation Spectra Derived From EO-1 Hyperion

Hyperspectral data are generally noisier compared to broadband multispectral data because their narrow bandwidth can only capture very little energy that may be overcome by the self-generated noise inside the sensors. It is desirable to smoothen the reflectance spectra. This study was carried out to see the effect of smoothing algorithms - Fast-Fourier Transform (FFT) and Savitzky–Golay (SG) methods on the statistical properties of the vegetation spectra at varying filter sizes. The data used in the study is the reflectance spectra data obtained from Hyperion sensor over an agriculturally dominated area in Modipuram (Uttar Pradesh). The reflectance spectra were extracted for wheat crop at different growth stages. Filter sizes were varied between 3 and 15 with the increment of 2. Paired t-test was carried out between the original and the smoothed data for all the filter sizes in order to see the extent of distortion with changing filter sizes. The study showed that in FFT, beyond filter size 11, the number of locations within the spectra where the smooth spectra were statistically different from its original counterpart increased to 14 and reaches 21 at the filter size 15. However, in SG method, number of statistically different locations were more than those found in the FFT, but the number of locations did not changing drastically. The number of statistically disturbed locations in SG method varied between 16 and 19. The optimum filter size for smoothing the vegetation spectra was found to be 11 in FFT and 9 in SG method.     

VLBI-derived troposphere parameters during CONT08

Time-series of zenith wet and total troposphere delays as well as north and east gradients are compared, and zenith total delays (ZTD) are combined on the level of parameter estimates. Input data sets are provided by ten Analysis Centers (ACs) of the International VLBI Service for Geodesy and Astrometry (IVS) for the CONT08 campaign (12?C26 August 2008). The inconsistent usage of meteorological data and models, such as mapping functions, causes systematics among the ACs, and differing parameterizations and constraints add noise to the troposphere parameter estimates. The empirical standard deviation of ZTD among the ACs with regard to an unweighted mean is 4.6?mm. The ratio of the analysis noise to the observation noise assessed by the operator/software impact (OSI) model is about 2.5. These and other effects have to be accounted for to improve the intra-technique combination of VLBI-derived troposphere parameters. While the largest systematics caused by inconsistent usage of meteorological data can be avoided and the application of different mapping functions can be considered by applying empirical corrections, the noise has to be modeled in the stochastic model of intra-technique combination. The application of different stochastic models shows no significant effects on the combined parameters but results in different mean formal errors: the mean formal errors of the combined ZTD are 2.3?mm (unweighted), 4.4?mm (diagonal), 8.6?mm [variance component (VC) estimation], and 8.6?mm (operator/software impact, OSI). On the one hand, the OSI model, i.e. the inclusion of off-diagonal elements in the cofactor-matrix, considers the reapplication of observations yielding a factor of about two for mean formal errors as compared to the diagonal approach. On the other hand, the combination based on VC estimation shows large differences among the VCs and exhibits a comparable scaling of formal errors. Thus, for the combination of troposphere parameters a combination of the two extensions of the stochastic model is recommended.