胶州湾中国对虾资源的生态特征

胶州湾是我囻黄海南部对虾的重要产卵场之一,每年4月中国对虾(Penaeus chinensis)亲体陆续进人胶州湾,进行产卵活动。繁殖的幼对虾生长迅速,至8月下旬虾群平均体长可达13cm左右,成为秋汛渔业的重要捕捞对象。近年由于捕捞力量加强等诸多因素,湾内对虾的年渔获量由70年代的2-5t,减至80年代的1-2t。虽然1984年以来有关部门实施对虾增殖放流,对虾资源量有所回升,但是因春季洄游的亲体(雌虾)数量锐减,7-8月间又使用各种网具违捕幼虾,因而极大地损害了幼虾资源。刘瑞玉等(1992)曾调查研究了胶州湾对虾生物资源。本文根据作者1991年以来5月和8月的对虾拖网调査资料,对胶州湾对虾资源的生态分布及其变动原因进行了分析研究,对加强管理和保护幼虾资源,以及提高对虾产量有极其重要的意义。     

Tank wall effects on broadside current forces on barge models

Three different barge sizes were tested in uniform current in a tank of limited width. One of the barges was tested with and without bilge keels. Tests were conducted in both deep and shallow water. The barges were placed broadside to the current flow and the lateral forces on the barges were measured. The effect of the tank walls on these forces is clearly shown.     

Cross-shelf exchange in a model of the Ross Sea circulation and biogeochemistry

Transport of warm, nutrient-rich Circumpolar Deep Water (CDW) onto Antarctic continental shelves and coastal seas has important effects on physical and biological processes. The present study investigates the locations of this transport and its dynamics in the Ross Sea with a high-resolution three-dimensional numerical model. The model circulation is forced by daily wind stress along with heat and salt fluxes calculated from atmospheric climatologies by bulk formulae. All surface fluxes are modified by an imposed climatological ice cover. Waters under the Ross Ice Shelf are not included explicitly, but their effect on temperature and salinity is imposed in a buffer zone at the southern end of the model domain. A simple nutrient uptake is calculated based on the climatological chlorophyll distribution and Monod uptake kinetics.Model circulation is strongly affected by bottom topography, due to weak stratification, and agrees with schematics of the general flow and long-term current measurements except near the southern boundary. The sea-surface temperature is similar to satellite estimates except that the warmest simulated temperatures are slightly higher than observations. There is a significant correlation between the curvature of the shelf break and the transport across the shelf break. A momentum term balance shows that momentum advection helps to force flow across the shelf break in specific locations due to the curvature of the bathymetry (that is, the isobaths curve in front of the flow). For the model to create a strong intrusion of CDW onto the shelf, it appears two mechanisms are necessary. First, CDW is driven onto the shelf at least partially due to momentum advection and the curvature of the shelf break; then, the general circulation on the shelf takes the CDW into the interior.     

Design and projected performance of a flapping foil AUV

The design and construction of a biomimetic flapping foil autonomous underwater vehicle is detailed. The vehicle was designed as a proof of concept for the use of oscillating foils as the sole source of motive power for a cruising and hovering underwater vehicle. Primary vehicle design requirements included scalability and flexibility in terms of the number and placement of foils, so as to maximize experimental functionality. This goal was met by designing an independent self-contained module to house each foil, requiring only direct current power and a connection to the vehicle's Ethernet local area network for operation. The results of tests on the foil modules in the Massachusetts Institute of Technology (MIT) Marine Hydrodynamics Water Tunnel and the MIT Ship Model Testing Tank are both used to demonstrate fundamental properties of flapping foils and to predict the performance of the specific vehicle design based on the limits of the actuators. The maximum speed of the vehicle is estimated based on the limitations of the specific actuator and is shown to be a strong function of the vehicle drag coefficient. When using four foils, the maximum speed increases from 1 m/s with a vehicle C/sub D/ of 1.4 to 2 m/s when C/sub D/=0.1, where C/sub D/ is based on vehicle frontal area. Finally, issues of vehicle control are considered, including the decoupling of speed and pitch control using pitch-biased maneuvering and the tradeoff between actuator bandwidth and authority during both the cruising and hovering operation.     

Boussinesq-type modelling using an unstructured finite element technique

A model for solving the two-dimensional enhanced Boussinesq equations is presented. The model equations are discretised in space using an unstructured finite element technique. The standard Galerkin method with mixed interpolation is applied. The time discretisation is performed using an explicit three-step Taylor–Galerkin method. The model is extended to the surf and swash zone by inclusion of wave breaking and a moving boundary at the shoreline. Breaking is treated by an existing surface roller model, but a new procedure for the detection of the roller thickness is devised. The model is verified using four test cases and the results are compared with experimental data and results from an existing finite difference Boussinesq model.     

Second-order drift force response of offshore guyed towers

An iterative frequency domain method of analysis is presented for determining the response behaviour of Guyed Offshore Towers to low-frequency, second-order wave drift forces generated in a random sea environment. For the response analysis, the tower is idealized as a shear beam with a rotational spring at the bottom support. The guylines are replaced by a non-linear spring. The second-order drift force is considered to be proportional to the square of the wave elevation and is simulated using a drift force coefficient and the time history of a slowly varying wave envelope in random sea. The responses due to drift forces are obtained in frequency domain by incorporating the non-linearities produced due to non-linear guy lines. An example problem is solved under different random sea states to compare the response behaviour of the tower obtained by the second-order wave force, the first-order wave force and a combination of the two.     

On the vertical distribution of

The aim of this paper is to present an analytical expression for the vertical distribution of the correlation between the horizontal ( ) and vertical ( ) wave velocity components. This quantity, , which appears explicitly in the time-averaged momentum balance equations, has been shown to play an important role in the vertical distribution of wave-induced currents.The proposed formulation for is based on an identity that relates the effective (wave) shear stress to the effective (wave) normal stresses ( ² and ²) and to the vorticity of the oscillatory flow gw. This general expression has been applied to simplified situations and has been shown to degenerate into other existing formulations with comparable simplifying assumptions, viz. irrotational waves in shallow water over an arbitrary bottom topography and breaking waves over a horizontal bottom.The model has also been applied to the case of waves interacting with a depth-varying current over a horizontal bottom, in which preliminary results have been obtained for a simplified situation invoking linear (small-amplitude) wave theory.     

Reflection of large-scale inhomogeneities in the air-sea boundary layer on the intensity of surface wave breaking in the ocean

An overview of experiments is given on the observation of the dependence of the intensity of wind wave breaking on large-scale currents' inhomogeneities and atmospheric boundary layer stratification. The data were interpreted using a model in which the variance of the wind wave breaking intensity reflects fluctuations in the influx of energy to wind waves due to various factors. Translated by V. Puchkin.     

Physico-chemical and mineralogical studies on cochin marine clays

Large deposits of marine clays are encountered all along the Indian coastal belt. These clays are pleistocene to recent in origin, are considered to be young, and were deposited in a salt or brackish environment. These clays are very soft in consistency with low in-situ strength and high compressibility. The properties of these soil deposits depend mainly on the clay minerals present. In the present investigation, the mineralogical studies of some Cochin marine clays were carried out using XRD technique. The physical and chemical properties of these deposits were also reported. The test results were compared with some earlier reported works on marine clays.