Sedimentology of a subtidal,tide-dominated sand body in the Yellow Sea,southwest Korea

Odanam Satoe, a subtidal, tide-dominated sand body in the Yellow Sea, Korea, is linear in plan and asymmetrical in cross-section. It consists of fine- to medium-grained, well-sorted subangular sand. Bedforms consist of high-amplitude (1–2 m) sandwaves on the lower flanks of the gentler-sloping bar surface, and medium-amplitude (0.5-1 m) sandwaves on the sand body trough adjoining the steeper face, the bar crest and shallower parts of the gently sloping bar surface. Bedforms are absent on the relatively steeper bar surface, which is characterized by 2° slopes. Bedform orientation on the gentler slope is oblique by 30° to the bar crest, parallel to the sand-body crest on the crest itself, and opposite to the steeper sand-body face in the trough below the steeper slope of the bar.Bottom current velocity data show that tidal currents are semi-rotary with a flood time—velocity asymmetry over the gentler slope, and ebb time—velocity asymmetry over the steeper slope during most of the tidal cycle. Tidal-current flow parallels bar elongation over the steeper slope, whereas over the gentler slope, tidal-current flow is directed at 30° to the bar crest and changes to normal to the crest one hour prior to low tide. Bedform orientation mapped with side-scan sonar shows agreement with these flow directions.Sand dispersal around the sand body is controlled by time—velocity asymmetry and partial rotary flow directions of tidal currents. This circulation causes not only a trapezoidal mode of grain dispersal, but also westerly migration of the sand body documented from comparative bathymetric surveys in 1964 and 1980.     

Breaking wave impact on vertical and sloping coastal structures

The results of laboratory experiments on the maximum and bottom impact pressures from waves breaking directly on vertical and sloping faced coastal structures are presented. Direct wave breaking on a wall is classified as early, late, and perfect breaking. Although the present study is aimed at dealing with the type of impact resulting from the perfect breaking, to some extent the occurrence of early and late breaking are unavoidable. The wave impact pressures, therefore, have a random nature of variation from impact-to-impact under the same conditions. The maximum and bottom impact pressures on walls are treated statistically. The effects of the wall angle and foreshore slope on these two quantities are examined. The results show that for practical applications, the still-water level can be taken as the acting place for the maximum impact pressure on the wall. Simultaneous impact pressure distribution below and above still-water level may be approximated as parabolic and linear, respectively. Finally, using a wall deflection criterion, a water depth region in front of the wall is defined, where the breaking wave forces may reach a critical level.     

Harpacticoida taxocen diversity in the silty-sandy littoral zone of Kandalaksha Bay of the White Sea

The fauna composition, ecological groups, and life forms of Harpacticoids of soft littoral grounds from 15 sites off the Karelian coast in Kandalaksha Bay of the White Sea were studied. Six types of harpacticoid taxocens with different sets of dominating species are described. On silty sands with clear signs of desalination, the Stenchelia palustris taxocen is common; medium-grained sands are characterized by the Heterolaophonte minuta, Paraleptastacus kliei — Huntemannia jadensis, and Amphiascoides nanus — Scottopsyllus minor taxocens; while on coarse sands, the Ameira parvula and Ameira scotti — Mesochra lilljeborgi taxocens have developed. The diversity of the taxocens is partly explained by the differences in the grain-size composition and salinity at different sites. In addition, groups of various taxocens dwelling on the same type of the sediments were found in different minor bights of the coastline.     

Quality control in mud coring

Consideration of factors influencing the interaction between a corer and sediment suggest the likelihood of significant and anisotropic straining of the particle framework during coring. Direct observations allow the coring process to be discretised, the relative motion of corer, core and sediment to be visualized and confirm that the development of differences between corer penetration and core length is not a continuous process. Records suggest the possibility of dislocation of the relative positions of porewater and particle framework, which may lead to the disequilibration of sorbed species.     

An inexpensive instrument for measuring benthic current velocity and direction at sea

An instrument which measures the velocity and direction of benthic water currents at depths of up to 80 m is described. Characteristics of this meter include: (i) readings are not affected by water flow during sinking or retrieval; (ii) it is portable; (iii) it operates unattended; (iv) it is inexpensive; and (v) it requires only simple maintenance. A timing circuit which operates two time periods in succession is used to activate and de-activate a revolution counter and a fluidfilled compass which are mounted on a special frame and vane system. In the field, the instrument accurately measured average current velocities of up to 6 m s⁻¹. Data are presented which illustrate the usefulness of this instrument in describing the velocity and direction of benthic currents along the east coast of Australia and demonstrate a positive correlation between benthic current velocity and catch rates of the commercially-exploited spanner crab Ranina ranina.     

Ageostrophic dynamics of the upper ocean layer: Measurements over the transatlantic section along 53° N

Some aspects of the upper ocean layer dynamics are considered, including the Ekman transport, the relation of the thickness of the quasi-homogeneous layer to the thickness of the layer of rotation of the drift current vector, and the correlation between the level of the turbulent energy dissipation and the thickness of the quasi-homogeneous layer.     

Sediment-starved sand ridges on a mixed carbonate/siliciclastic inner shelf off west-central Florida

High-resolution side-scan mosaics, sediment analyses, and physical process data have revealed that the mixed carbonate/siliciclastic, inner shelf of west-central Florida supports a highly complex field of active sand ridges mantled by a hierarchy of bedforms. The sand ridges, mostly oriented obliquely to the shoreline trend, extend from 2 km to over 25 km offshore. They show many similarities to their well-known counterparts situated along the US Atlantic margin in that both increase in relief with increasing water depth, both are oriented obliquely to the coast, and both respond to modern shelf dynamics. There are significant differences in that the sand ridges on the west-central Florida shelf are smaller in all dimensions, have a relatively high carbonate content, and are separated by exposed rock surfaces. They are also shoreface-detached and are sediment-starved, thus stunting their development. Morphological details are highly distinctive and apparent in side-scan imagery due to the high acoustic contrast. The seafloor is active and not a relict system as indicated by: (1) relatively young AMS ¹⁴C dates (<1600 yr BP) from forams in the shallow subsurface (1.6 meters below seafloor), (2) apparent shifts in sharply distinctive grayscale boundaries seen in time-series side-scan mosaics, (3) maintenance of these sharp acoustic boundaries and development of small bedforms in an area of constant and extensive bioturbation, (4) sediment textural asymmetry indicative of selective transport across bedform topography, (5) morphological asymmetry of sand ridges and 2D dunes, and (6) current-meter data indicating that the critical threshold velocity for sediment transport is frequently exceeded. Although larger sand ridges are found along other portions of the west-central Florida inner shelf, these smaller sand ridges are best developed seaward of a major coastal headland, suggesting some genetic relationship. The headland may focus and accelerate the N–S reversing currents. An elevated rock terrace extending from the headland supports these ridges in a shallower water environment than the surrounding shelf, allowing them to be more easily influenced by currents and surface gravity waves. Tidal currents, storm-generated flows, and seasonally developed flows are shore-parallel and oriented obliquely to the NW–SE trending ridges, indicating that they have developed as described by the Huthnance model. Although inner shelf sand ridges have been extensively examined elsewhere, this study is the first to describe them in a low-energy, sediment-starved, dominantly mixed siliciclastic/carbonate sedimentary environment situated on a former limestone platform.