An experimental study of the grain-scale processes of peridotite melting: implications for major and trace element distribution during equilibrium and disequilibrium melting

The grain-scale processes of peridotite melting were examined at 1,340°C and 1.5 GPa using reaction couples formed by juxtaposing pre-synthesized clinopyroxenite against pre-synthesized orthopyroxenite or harzburgite in graphite and platinum-lined molybdenum capsules. Reaction between the clinopyroxene and orthopyroxene-rich aggregates produces a melt-enriched, orthopyroxene-free, olivine + clinopyroxene reactive boundary layer. Major and trace element abundance in clinopyroxene vary systematically across the reactive boundary layer with compositional trends similar to the published clinopyroxene core-to-rim compositional variations in the bulk lherzolite partial melting studies conducted at similar P–T conditions. The growth of the reactive boundary layer takes place at the expense of the orthopyroxenite or harzburgite and is consistent with grain-scale processes that involve dissolution, precipitation, reprecipitation, and diffusive exchange between the interstitial melt and surrounding crystals. An important consequence of dissolution–reprecipitation during crystal-melt interaction is the dramatic decrease in diffusive reequilibration time between coexisting minerals and melt. This effect is especially important for high charged, slow diffusing cations during peridotite melting and melt-rock reaction. Apparent clinopyroxene-melt partition coefficients for REE, Sr, Y, Ti, and Zr, measured from reprecipitated clinopyroxene and coexisting melt in the reactive boundary layer, approach their equilibrium values reported in the literature. Disequilibrium melting models based on volume diffusion in solid limited mechanism are likely to significantly underestimate the rates at which major and trace elements in residual minerals reequilibrate with their surrounding melt. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Chrome-spinels in serpentinites and talc carbonates of the El Ideid-El Sodmein District, central Eastern Desert, Egypt: their metamorphism and petrogenetic implications

Serpentinites and talc-carbonate rocks of El Ideid-El Sodmein District (ISD), central Eastern Desert, Egypt, contain variably altered chrome-spinels. Back-scattered electron images and electron microprobe analyses of chrome-spinels and associated silicates are made to evaluate their textural and compositional variations with metamorphism. In most cases the chrome-spinel crystals are concentrically zoned with unaltered cores through transitional zone of ferritchromit to Cr-magnetite toward the rims. In talc-carbonate rocks chrome-spinels are extensively altered to Cr-magnetite. Compared to cores, the metamorphic rims are enriched in Cr# (0.83–1.0 vs. 0.58–0.63 for rims and cores, respectively) and impoverished in Mg# (0.05–0.29 vs. 0.57–0.63), due to Mg–Fe and Al(Cr)–Fe³⁺ exchange with the surrounding silicates during regional metamorphism rather than serpentinization process. Textural and compositional features of the chrome-spinels suggest transitional greenschist-amphibolite up to lower amphibolite facies metamorphism (at 500–600 °C), which is isofacial with the country rocks. The common preservation of unaltered chrome-spinel cores in the serpentinites, contrary to talc-carbonate rocks, implies that full equilibration has not been attained due to small metamorphic fluid–rock ratio. Microprobe analyses profile across a concentrically zoned grain confirms the presence of two compositional (miscibility?) gaps; one between chrome-spinel core and ferritchromit zone; and another one between ferritchromit zone and Cr-magnetite outer rim.Chrome-spinel cores do not appear to have re-equilibrated completely with the metamorphic spinel rims and surrounding silicates, indicating relic magmatic composition not affected by metamorphism. Core compositions suggest an ophiolitic origin and derivation by high degrees of melting of reduced, depleted harzburgite to dunite mantle peridotites in an oceanic supra-subduction zone (marginal-basin) tectonic environment.     

Application of precise 142Nd/144Nd analysis of small samples to inclusions in diamonds (Finsch,South Africa) and Hadean Zircons (Jack Hills,Western Australia)

¹⁴⁶Sm–¹⁴²Nd and ¹⁴⁷Sm–¹⁴³Nd systematics were investigated in garnet inclusions in diamonds from Finsch (S. Africa) and Hadean zircons from Jack Hills (W. Australia) to assess the potential of these systems as recorders of early Earth evolution. The study of Finsch inclusions was conducted on a composite sample of 50 peridotitic pyropes with a Nd model age of 3.3 Ga. Analysis of the Jack Hills zircons was performed on 790 grains with ion microprobe ²⁰⁷Pb/²⁰⁶Pb spot ages from 3.95 to 4.19 Ga. Finsch pyropes yield 100 × ?¹⁴²Nd = ? 6 ± 12 ppm, ?¹⁴³Nd = ? 32.5, and ¹⁴⁷Sm/¹⁴⁴Nd = 0.1150. These results do not confirm previous claims for a 30 ppm ¹⁴²Nd excess in South African cratonic mantle. The lack of a ¹⁴²Nd anomaly in these inclusions suggests that isotopic heterogeneities created by early mantle differentiation were remixed at a very fine scale prior to isolation of the South African lithosphere. Alternatively, this result may indicate that only a fraction of the mantle experienced depletion during the first 400 Myr of its history. Analysis of the Jack Hills zircon composite yielded 100 × ?¹⁴²Nd = 8 ± 10 ppm, ?¹⁴³Nd = 45 ± 1, and ¹⁴⁷Sm/¹⁴⁴Nd = 0.5891. Back-calculation of this present-day ?¹⁴³Nd yields an unrealistic estimate for the initial ?¹⁴³Nd of ? 160 ?-units, clearly indicating post-crystallization disturbance of the ¹⁴⁷Sm–¹⁴³Nd system. Examination of ^146,147Sm–^142,143Nd data reveals that the Nd budget of the Jack Hills sample is dominated by non-radiogenic Nd, possibly contained in recrystallized zircon rims or secondary subsurface minerals. This secondary material is characterized by highly discordant U–Pb ages. Although the mass fraction of altered zircon is unlikely to exceed 5–10% of total sample, its high LREE content precludes a reliable evaluation of ¹⁴⁶Sm–¹⁴²Nd systematics in Jack Hills zircons.     

Controls on porphyroblast size along a regional metamorphic field gradient

Garnet-bearing schists from the Waterville Formation of south-central Maine provide an opportunity to examine the factors governing porphyroblast size over a range of metamorphic grade. Three-dimensional sizes and locations for all garnet porphyroblasts were determined for three samples along the metamorphic field gradient spanning lowest garnet through sillimanite grade, using high-resolution X-ray computed tomography. Comparison of crystal size distributions to previous data sets obtained by stereological methods for the same samples reveals significant differences in mode, mean, and shape of the distributions. Quantitative textural analysis shows that the garnets in each rock crystallized in a diffusion-controlled nucleation and growth regime. In contrast to the typical observation of a correlation between porphyroblast size and position along a metamorphic field gradient, porphyroblast size of the lowest-grade specimen is intermediate between the high- and middle-grade specimens’ sizes. Mean porphyroblast size does not correlate with peak temperatures from garnet-biotite Fe-Mg exchange thermometry, nor is post-crystallization annealing (Ostwald Ripening) required to produce the observed textures, as was previously proposed for these rocks. Robust pseudosection calculations fail to reproduce the observed garnet core compositions for two specimens, suggesting that these calc-pelites experienced metasomatism. For each of these two specimens, Monte Carlo calculations suggest potential pre-metasomatism bulk compositions that replicate garnet core compositions. Pseudosection analyses allow the estimation of the critical temperatures for garnet growth: ∼481, ∼477, and ∼485°C for the lowest-garnet-zone, middle-garnet-zone, and sillimanite-zone specimens, respectively. Porphyroblast size appears to be determined in this case by a combination of the heating rate during garnet crystallization, the critical temperature for the garnet-forming reaction and the kinetics of nucleation. Numerical simulations of thermally accelerated, diffusion-controlled nucleation, and growth for the three samples closely match measured crystal size distributions. These observations and simulations suggest that previous hypotheses linking the garnet size primarily to the temperature at the onset of porphyroblast nucleation can only partially explain the observed textures. Also important in determining porphyroblast size are the heating rate and the distribution of favorable nucleation sites.     

Low-pressure,water-assisted anatexis of basic dykes in a contact metamorphic aureole,Fuerteventura (Canary Islands): oxygen isotope evidence for a meteoric fluid origin

Migmatites produced by low-pressure anatexis of basic dykes are found in a contact metamorphic aureole around a pyroxenite–gabbro intrusion (PX2), on Fuerteventura. Dykes outside and inside the aureole record interaction with meteoric water, with low or negative δ¹⁸O whole-rock values (+0.2 to −3.4‰), decreasing towards the contact. Recrystallised plagioclase, diopside, biotite and oxides, from within the aureole, show a similar evolution with lowest δ¹⁸O values (−2.8, −4.2, −4.4 and −7.6‰, respectively) in the migmatite zone, close to the intrusion. Relict clinopyroxene phenocrysts preserved in all dykes, retain typically magmatic δ¹⁸O values up to the anatectic zone, where the values are lower and more heterogeneous. Low δ¹⁸O values, decreasing towards the intrusion, can be ascribed to the advection of meteoric water during magma emplacement, with increasing fluid/rock ratios (higher dyke intensities towards the intrusion acting as fluid-pathways) and higher temperatures promoting increasing exchange during recrystallisation. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

A transdisciplinary analysis of water problems in the mountainous karst areas of Morocco

Water management and engineering in the karstic High Atlas of Morocco are difficult tasks under the prevailing geological, hydrogeological, geomorphological, vegetational and climatic conditions. It is important to be able to understand and predict the characteristics and availability of water for future water planning in the region under changing climatic and agricultural conditions. An interdisciplinary analysis of problems and adequate hydrological modelling tools developed by geologists, hydrologists and biologists are necessary. The karst areas of the High Atlas Mountains are characterised by impermeable triassic basalt underlying substantial subsurface reservoirs with high potential discharge rates. The karst groundwater aquifers are extensive but largely unknown in dimension, probably with a hierarchical network of groundwater flow paths. It is estimated that approximately 70% of the surface water is directly lost to groundwater. Steep landslide- and debris flow prone slopes exist next to coarse-grained, highly porous river beds. Infrequent, high intensity rainfall or snowmelt causes a particularly high flood risk to these karst areas. In addition, agriculture and land use changes have degraded the karst areas. The most important driving forces for degradation include permanent overgrazing even during droughts and the use of firewood by a continually growing population. Large scale degradation of vegetation has occurred in the oro-mediterranean (mountainous Mediterranean) zone, between 2600 and 3400 m which coincides with the most important zone for karstic groundwater creation. The combination of high amounts of groundwater flow and rapid surface flow due to sparse vegetation has increased the problems of flood flow.     

Association of dissolved aluminum with silica: Connecting molecular structure to surface reactivity using NMR

We studied uptake mechanisms for dissolved Al on amorphous silica by combining bulk-solution chemistry experiments with solid-state Nuclear Magnetic Resonance techniques (²⁷Al magic-angle spinning (MAS) NMR, ²⁷Al{¹H} cross-polarization (CP) MAS NMR and ²⁹Si{¹H} CP-MAS NMR). We find that reaction of Al (1 mM) with amorphous silica consists of at least three reaction pathways; (1) adsorption of Al to surface silanol sites, (2) surface-enhanced precipitation of an aluminum hydroxide, and (3) bulk precipitation of an aluminosilicate phase. From the NMR speciation and water chemistry data, we calculate that 0.20 (±0.04) tetrahedral Al atoms nm⁻² sorb to the silica surface. Once the surface has sorbed roughly half of the total dissolved Al (∼8% site coverage), aluminum hydroxides and aluminosilicates precipitate from solution. These precipitation reactions are dependent upon solution pH and total dissolved silica concentration. We find that the Si:Al stoichiometry of the aluminosilicate precipitate is roughly 1:1 and suggest a chemical formula of NaAlSiO₄ in which Na⁺ acts as the charge compensating cation. For the adsorption of Al, we propose a surface-controlled reaction mechanism where Al sorbs as an inner-sphere coordination complex at the silica surface. Analogous to the hydrolysis of , we suggest that rapid deprotonation by surface hydroxyls followed by dehydration of ligated waters results in four-coordinate (>SiOH)₂Al(OH)₂ sites at the surface of amorphous silica.     

Isotopic studies of leaf water. Part 1: A physically based two-dimensional model for pine needles

Understanding of isotopic variations in leaf water is important for reconstruction of paleoclimate and assessment of global biochemical processes. We report here a study of isotopic distributions within a single needle of two pine species, Pinus resinosa Ait and Pinus strobes L., with the objective of understanding how isotopic compositions of leaf water are controlled by environmental and physiological variables. A 2D model was developed to simulate along-leaf isotopic variations and bulk leaf water isotopic compositions. In addition to variables common to all leaf water isotopic models, this 2D model also takes into account the specific geometry and dimensions of pine needles and the isotopic transport in xylem and mesophyll. The model can successfully simulate oxygen isotopic variations along a single needle and averaged over a leaf (bulk leaf water). The simulations suggest that isotopic composition of the bulk leaf water does not always depend only upon the average transpiration rate, which in turn raises questions about using leaf water isotopic values to estimate transpiration rates. An unsuccessful attempt to simulate along-needle hydrogen isotopic variations suggests that certain unknown biological process(es) may not have been incorporated into our 2D model, and if so, it calls for a reevaluation of all other models for hydrogen isotopic simulations of leaf water since they too lack these processes.Existing leaf water isotopic models are reviewed in this work. In particular, we evaluate the most frequently used model, the stomatal boundary layer model (also referred to as the Craig-Gordon model). We point out that discrepancy between the boundary layer model and the measured bulk leaf water seems to depend upon relative humidity. Using our 2D model, we show that this humidity dependency is a result of an interplay between environmental and physiological conditions: if the transpiration rate of plant leaves decreases with increasing relative humidity, our 2D model can reproduce the pattern of isotopic discrepancy between boundary layer model predictions and observations, enabling us to understand better the reason behind this discrepancy.     

The Fe-C system at 5 GPa and implications for Earth’s core

Earth’s core may contain C, and it has been suggested that C in the core could stabilize the formation of a solid inner core composed of Fe₃C. We experimentally examined the Fe-C system at a pressure of 5 GPa and determined the Fe-C phase diagram at this pressure. In addition, we measured solid metal/liquid metal partition coefficients for 17 trace elements and examined the partitioning behavior between Fe₃C and liquid metal for 14 trace elements. Solid metal/liquid metal partition coefficients are similar to those found in one atmosphere studies, indicating that the effect of pressure to 5 GPa is negligible. All measured Fe₃C/liquid metal partition coefficients investigated are less than one, such that all trace elements prefer the C-rich liquid to Fe₃C. Fe₃C/liquid metal partition coefficients tend to decrease with decreasing atomic radii within a given period. Of particular interest, our 5 GPa Fe-C phase diagram does not show any evidence that the Fe-Fe₃C eutectic composition shifts to lower C contents with increasing pressure, which is central to the previous reasoning that the inner core may be composed of Fe₃C.