Planktonic foraminifers in the southern Bering Sea: Changes in composition and productivity during the Late Pleistocene-Holocene

Taxonomic composition and distribution of planktonic foraminifers are studied in section of Core GC-11 that penetrated through Upper Quaternary sediments of the Bowers Ridge western slope, the southern Bering Sea. As is shown, structure of foraminiferal assemblage and productivity have varied substantially during the last 32000 calendar years in response to changes in surface water temperatures and water mass circulation in the northern part of the Pacific, the Bering Sea included. The productivity was maximal during deglaciation epoch, being notably lower in the Holocene and minimal at the glaciation time.     

The Ruiga intrusion: A typical example of a shallow-facies paleoproterozoic peridotite-gabbro-komatiite-basaltic association of the Vetreny Belt,Southeastern Fennoscandia

The Ruiga differentiated mafic-ultramafic intrusion in the northwestern part of the Vetreny Belt paleorift was described for the first time based on geological, petrological, geochronological, and geochemical data. The massif (20 km² in exposed area) is a typical example of shallow-facies peridotite-gabbro-komatiite-basalt associations and consists of three zones up to 810 m in total thickness (from bottom to top): melanogab-bronorite, peridotite, and gabbro. In spite of pervasive greenschist metamorphism, the rocks contain locally preserved primary minerals: olivine (Fo _75–86), bronzite, augite of variable composition, labradorite, and Cr-spinels. A mineral Sm-Nd isochron on olivine melanogabbronorite from the Ruiga Massif defines an age of 2.39 ± 0.05 Ga, while komatiitic basalts of the Vetreny Belt Formation were dated at 2.40–2.41 Ga (Puchtel et al., 1997). The rocks of the Ruiga intrusion and lava flows of Mt. Golets have similar major, rare-earth, and trace element composition, which suggests their derivation from a single deep-seated source. Their parent magma was presumably a high-Mg komatiitic basalt. In transitional crustal chambers, its composition was modified by olivine-controlled fractionation and crustal contamination, with the most contaminated first portions of the ejected melt. In terms of geology and geochemistry, the considered magmatic rocks of the Vetreny Belt are comparable with the Raglan Ni-PGE komatiite gabbro-peridotite complex in Canada (Naldrett, 2003).     

Dissolved and labile concentrations of Cd, Cu, Pb, and Zn in the South Fork Coeur d’Alene River, Idaho: Comparisons among chemical equilibrium models and implications for biotic ligand models

In order to evaluate thermodynamic speciation calculations inherent in biotic ligand models, the speciation of dissolved Cd, Cu, Pb, and Zn in aquatic systems influenced by historical mining activities is examined using equilibrium computer models and the diffusive gradients in thin films (DGT) technique. Several metal/organic-matter complexation models, including WHAM VI, NICA-Donnan, and Stockholm Humic model (SHM), are used in combination with inorganic speciation models to calculate the thermodynamic speciation of dissolved metals and concentrations of metal associated with biotic ligands (e.g., fish gills). Maximum dynamic metal concentrations, determined from total dissolved metal concentrations and thermodynamic speciation calculations, are compared with labile metal concentrations measured by DGT to assess which metal/organic-matter complexation model best describes metal speciation and, thereby, biotic ligand speciation, in the studied systems. Results indicate that the choice of model that defines metal/organic-matter interactions does not affect calculated concentrations of Cd and Zn associated with biotic ligands for geochemical conditions in the study area, whereas concentrations of Cu and Pb associated with biotic ligands depend on whether the speciation calculations use WHAM VI, NICA-Donnan, or SHM. Agreement between labile metal concentrations and dynamic metal concentrations occurs when WHAM VI is used to calculate Cu speciation and SHM is used to calculate Pb speciation. Additional work in systems that contain wide ranges in concentrations of multiple metals should incorporate analytical speciation methods, such as DGT, to constrain the speciation component of biotic ligand models.     

The passivation of calcite by acid mine water. Column experiments with ferric sulfate and ferric chloride solutions at pH 2

Column experiments, simulating the behavior of passive treatment systems for acid mine drainage, have been performed. Acid solutions (HCl or H₂SO₄, pH 2), with initial concentrations of Fe(III) ranging from 250 to 1500 mg L⁻¹, were injected into column reactors packed with calcite grains at a constant flow rate. The composition of the solutions was monitored during the experiments. At the end of the experiments (passivation of the columns), the composition and structure of the solids were measured. The dissolution of calcite in the columns caused an increase in pH and the release of Ca into the solution, leading to the precipitation of gypsum and Fe–oxyhydroxysulfates (Fe(III)–SO₄–H⁺ solutions) or Fe–oxyhydroxychlorides (Fe(III)–Cl–H⁺ solutions). The columns worked as an efficient barrier for some time, increasing the pH of the circulating solutions from 2 to 6–7 and removing its metal content. However, after some time (several weeks, depending on the conditions), the columns became chemically inert. The results showed that passivation time increased with decreasing anion and metal content of the solutions. Gypsum was the phase responsible for the passivation of calcite in the experiments with Fe(III)–SO₄–H⁺ solutions. Schwertmannite and goethite appeared as the Fe(III) secondary phases in those experiments. Akaganeite was the phase responsible for the passivation of the system in the experiments with Fe(III)–Cl–H⁺ solutions.     

Gaseous mercury emissions from urban surfaces: Controls and spatiotemporal trends

The spatial and temporal variability of Hg emissions from urban paved surfaces was assessed through repeated measurements under varying environmental conditions at six sample sites in Toronto, Ontario, Canada. The results show significant spatial variability of the Hg emissions with median values ranging from below detection limit to 5.2 ng/m²/h. Two of the sites consistently had higher Hg emissions (on several occasions >20 ng/m²/h) than the other 4, which were equivalently low (maximum emission: 2.1 ng/m²/h). A surrogate measure of the pavement Hg concentrations was obtained during each day of sampling through the collection of street dust. The median street dust concentration also showed significant spatial variability (ranging from 9.6 to 44.5 ng/g). Regression analysis showed that the spatial variability of the Hg emissions was significantly related to the street dust concentrations. Controlled experiments using Hg amended street dust confirmed the relationship between Hg surface concentration and emission magnitude. Within a given sample site, Hg emissions varied temporally and multiple regression analysis showed that within-site variability was significantly influenced by changes in solar radiation with only a minor effect from surface temperature. Controlled experiments using shade cloths confirmed that solar radiation can have a large influence on the magnitude of Hg emissions within a given site. The emissions measured in Toronto were contextualized through comparison sampling in Austin, Texas. The Hg emissions measured in Austin were within the range detected in Toronto and also showed significant correlation with Hg street dust concentrations between sites. To provide a holistic assessment of Hg emissions from urban environments, samples were also collected from other common urban surfaces (soil, roofs, and windows). Soils consistently had higher emissions than all the other surfaces (7.3 ng/m²/h, n = 39).     

Radon transfer from groundwater used in showers to indoor air

Estimation of Rn transfer from water to indoor air based on multi-day measurements may underestimate alpha exposure that occurs at short time scales in confined spaces, such as from showering, in houses with high Rn activities in the water supply. In order to examine one such incremental increase in exposure, variations in Rn in water and indoor air in 18 houses with private wells in western North Carolina (USA) were investigated. Radon in well water ranged from 158 to 811 Bq L⁻¹ (median 239 Bq L⁻¹). After 20-min showers in bathrooms with closed doors, peak Rn in air increases (above background) ranged from 71 to 4420 Bq m⁻³ (median 1170 Bq m⁻³). Calculated transfer coefficients at the scale of a 40-min closed bathroom (20-min shower plus 20 min post-shower) are described by a lognormal distribution whose geometric mean exceeds the widely-used ∼10⁻⁴ whole-house transfer coefficient by about one order of magnitude. As short-lived decay products grow from shower-derived Rn, short-term alpha energy exposure occurs in bathrooms in addition to the exposure caused by Rn mixed throughout the volume of the house. Due to the increasing ratio of Rn decay products to Rn, alpha energy exposure is greatest several minutes after the shower is turned off. For a 7.2-min shower with 10 min of additional exposure before opening the door, a geometric mean 5.6% increase in exposure over the ∼10⁻⁴ whole-house transfer coefficient derived from longer measurement periods was estimated. In addition to Rn activity in water, short-term shower exposure to Rn progeny depends on exposure time, ventilation, attachment and deposition, among other variable factors that characterize individual houses and residents.     

Modeling households’ decisions on reconstruction of houses damaged by earthquakes––Japanese case study

In this study, households’ decisions on reconstruction of damaged houses were modeled, using questionnaire data in Japan. Characteristics of households’ decisions were investigated using parameter estimation results. The effects of subsidizing policy were evaluated as follows. First, subsidy for rebuilding may be effective for the households whose houses were heavily damaged. Second, there is a possibility that subsidy accelerated rebuilding of houses by the households having children. Third, subsidy for rebuilding may not be effective for elderly people’s households and households in depopulated areas.     

The effects of gas flaring on crops in the Niger Delta,Nigeria

Flaring of associated gas from oil exploitation has several consequences on the environment. This study explores the spatial variability effects of gas flaring on the growth and development of cassava (Manihot esculenta), waterleaf (Talinum triangulare), and pepper (Piper spp.) crops commonly cultivated in the Niger Delta, Nigeria. Data was collected on soil and atmospheric temperature and moisture at a 20-m interval, starting at 40 m from the flare point to a distance of 140 m. Lengths and widths of crop leaves, height of crop plants and cassava yields were measured at the specified distances. The amino acid, ascorbic acid, starch, and sugar constituents of the cassava yields were determined. The results suggest that a spatial gradient exists in the effects of gas flares on crop development. Retardation in crop development manifests in decreased dimensions of leaf lengths and widths of cassava and pepper crops closer to the gas flare point. Statistical analysis also confirms that cassava yields are higher at locations further away from the flare point. In addition, the amount of starch and ascorbic acid in cassava decreased when the plant is grown closer to the gas flare. High temperatures around the gas flare appear to be the most likely cause of this retardation. The waterleaf crop, on the other hand, appears to thrive better around the gas flare point.