Application of a distributed erosion model for the assessment of spatial erosion patterns in the Lushi catchment,China

A grid-based erosion model is developed by integrating the distributed hydrological model, BTOPMC, with the modified USLE to estimate soil erosion and sediment outflow during single storms. The possible sheet, rill, channel erosion types, and sediment transport processes are considered within each grid under the model structure. Instead of representing the sheet erosion and rill erosion separately, the classic USLE method is modified to simulate the lumped sheet–rill erosion during storms. In the modification, the runoff ratio and a relevant correction coefficient are brought into the R-factor which improves the model’s applicability in predicting erosion during single storms. Instead of representing a grid with a unique erosion type, a channel component is assumed to exist in each grid, and its width varies with the upstream contributing area of the grid. This assumption avoids the problems that are caused by the difference between the channel widths in the upstream area and the downstream area if the grid is simply recognized as a channel grid. It also enables the model to be applicable in simulating soil erosion and sediment outflow from a large catchment. Through a case study in the Lushi catchment, China, the results show an overall satisfactory accuracy for the selected events. Moreover, by analyzing the spatial distribution of soil erosion or deposition, the erosion-prone areas are identified for the prioritization purpose.     

Analysis of formation pressure test results in the Mount Elbert methane hydrate reservoir through numerical simulation

Targeting the methane hydrate (MH) bearing units C and D at the Mount Elbert prospect on the Alaska North Slope, four MDT (Modular Dynamic Formation Tester) tests were conducted in February 2007. The C2 MDT test was selected for history matching simulation in the MH Simulator Code Comparison Study. Through history matching simulation, the physical and chemical properties of the unit C were adjusted, which suggested the most likely reservoir properties of this unit. Based on these properties thus tuned, the numerical models replicating “Mount Elbert C2 zone like reservoir”, “PBU L-Pad like reservoir” and “PBU L-Pad down dip like reservoir” were constructed. The long term production performances of wells in these reservoirs were then forecasted assuming the MH dissociation and production by the methods of depressurization, combination of depressurization and wellbore heating, and hot water huff and puff. The predicted cumulative gas production ranges from 2.16 × 10⁶ m³/well to 8.22 × 10⁸ m³/well depending mainly on the initial temperature of the reservoir and on the production method.This paper describes the details of modeling and history matching simulation. This paper also presents the results of the examinations on the effects of reservoir properties on MH dissociation and production performances under the application of the depressurization and thermal methods.     

Oceanic fine structure

Abstract

Measurements by free fall instruments, in the San Diego Trough, the Florida Current, and the central Pacific, reveal the detailed structure of the vertical component of the oceanic temperature gradient. The temperature changes are concentrated into regions on the order of a meter thick wherein the measured gradients are often more than ten times the average gradient. The horizontal extent of the regions of high gradient is greater than 750 meters in the seasonal thermocline off San Diego, but is only a few hundred meters at depths greater than 400 meters.

Fine scale measurements show that the layers of high gradient consist of even finer fluctuations in gradient which are only a few centimeters thick. Time scales of the thinnest of these regions of high gradient are of the order of five minutes. The data also yields an estimate of the entropy generation. According to the results of an idealized model relating entropy generation to the turbulent heat transport, only 240 to 700 ergs per cm.² per sec were transported in a 25 meter vertical section measured in the San Diego Trough. This value compared with 3600 ergs per cm.² per sec estimated from the mean gradient and an eddy coefficient of 1 cm.² per sec.     

Conversion of waste to electricity in a microbial fuel cell using newly identified bacteria: <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis>

The present study deals with the capability of pulp industry wastewater to produce bioelectricity with isolation and screening of native electrogenic bacteria from wastewater. In the screening process, three bacterial isolates were obtained; they were studied on the basis of morphology and biochemical characteristics. The maximum bioelectricity producing bacteria was identified by sequencing method and was identified as Pseudomonas fluorescens, and it is a novel bacteria reported in bioelectricity production from pulp industry wastewater. Further, the work focuses on optimization of various parameters, i.e., inoculum size, pH, temperature, mediators and its concentration. It was observed that with pulp industry wastewater, inoculum size of 1.5% gave the maximum voltage and current of 1.244 ± 0.003^d V and 5.946 ± 0.005^d mA, respectively. A pH of 7.0 gave maximum voltage and current of 0.956 ± 0.009^e V and 2.692 ± 0.016^e mA. At 35 °C temperature, maximum production of voltage and current of 1.045 ± 0.003^d V and 2.167 ± 0.037^d mA were recorded. Among the various mediators, humic acid was found to be most effective as it produced a voltage of 1.054 ± 0.004^f V and current of 1.070 ± 0.004^d mA. Maximum voltage of 1.291 ± 0.021^f V and current of 1.896 ± 0.006^f mA were recorded with 200 μM of humic acid. Physicochemical analysis of the effluent was conducted before and after experimental run, and the values suggested that the microbial fuel cell technology is an efficient method for biological treatment of wastewater.     

Analysis of the weightiness of site effects on reinforced concrete (RC) building seismic behaviour: The Adra town example (SE Spain)

The damage distribution in Adra town (south‐eastern Spain) during the 1993 and 1994 Adra earthquakes (5.0 magnitude), that reached a maximum intensity degree of VII (European Macroseismic Scale (EMS scale)), was concentrated mainly in the south‐east zone of the town and the most relevant damage occurred in reinforced concrete (RC) buildings with four or five storeys. In order to evaluate the influence of ground condition on RC building behaviour, geological, geomorphological and geophysical surveys were carried out, and a detailed map of ground surface structure was obtained. Short‐period microtremor observations were performed in 160 sites on a 100m × 100m dimension grid and Nakamura's method was applied in order to determine a distribution map of soil predominant periods. Shorter predominant periods (0.1–0.3 s) were found in mountainous and neighbouring zones and larger periods (greater than 0.5 s) in thicker Holocene alluvial fans. A relationship T = (0.049 ± 0.001)N, where T is the natural period of swaying motion and N is the number of storeys, has been empirically obtained by using microtremor measurements at the top of 38 RC buildings (ranging from 2 to 9 storeys). 1‐D simulation of strong motion on different soil conditions and for several typical RC buildings were computed, using the acceleration record in Adra town of the 1993 earthquake. It is noteworthy that all the aforementioned results show the influence of site effects in the degree and distribution of observed building damage. Copyright © 2007 John Wiley & Sons, Ltd.     

Properties of fine technogenic sediments and their effect on channel process and self-purification of river water

The role of fine sediments of technogenic origin in channel process is analyzed. The specific features of sedimentation of particles with different density and shape and the issues of flocculation and consolidation of sediments in the bottom part of flow are discussed. Experimental data on the adhesion of particles are given and a relationship for its assessment is proposed. The class of sediments for which the adhesion determines the critical erosion velocity is determined. The processes of river water self-purification and precipitation of fine sediments were compared to show that sedimentation processes play an important role in river water self-purification.     

Long‐term temporal and spatial patterns in bioeroding sponge distribution at the Abrolhos Bank,Brazil, Southwestern Atlantic

Bioeroding sponges belong to the most dominant bioeroders, significantly contributing to the erosion of coral reefs. Some species are tolerant or even benefit from environmental conditions such as ocean warming, acidification, and eutrophication. In consequence, increases in sponge bioerosion have been observed on some coral reefs over the last decades. The Abrolhos Bank is the largest coral reef system in the South Atlantic. It has been affected by sedimentation, eutrophication, overfishing, and climate change, mainly affecting coastal reefs, and at lesser intensity outer ones as well. This study aimed to describe spatial and temporal patterns in bioeroding sponge distribution in carbonate substrates in the Abrolhos Bank. Photo‐quadrats were used to compare bioeroding sponge abundance between two shallow reefs: a coastal, Pedra de Leste (PL), and an outer reef, Parcel dos Abrolhos (PAB). Each individual was delimitated over the substrate by determining the sponge surface through a line connecting the outermost papillae. The study was conducted over 6 years in 2008–2009 and 2013–2016. Four species of bioeroding sponges were identified: Cliona carteri Ridley, 1881, C. delitrix Pang, 1973, C. cf. schmidtii Ridley, 1881, and Siphonodictyon coralliphagum Rützler, 1971. The distribution and abundance of species varied between the inner and outer reefs and across the years, and displayed certain selectivity for the calcareous substrates recorded. Crustose coralline algae (CCA) were the main substrate excavated by the most abundant bioeroding species, C. carteri, and represented 70% of the substrate types occupied by this sponge (CCA, coral overgrown by CCA and plain coral). The highest abundance of bioeroding sponges observed in photo‐quadrats was 21.3 individuals/m² at the outer reefs (PAB) in 2014. The abundances or areal extents of bioeroding sponges were up to 10 times greater on the outer reefs than on the coastal ones, where sedimentation is higher and more strongly influenced by siliciclastic material. Moreover, a higher herbivorous fish biomass has been reported on outer reefs which could also influence the higher abundance of bioeroding sponges in outer reefs. During the study period of 6 years, an increase in bioeroding sponge abundance was observed at the outer reefs (PAB), with the sea surface temperature increase. As CCA have an important role in reefal cementation and carbonate production in the Abrolhos reefs, a bioerosion impact might be expected, in particular, on the outer reefs.     

Anabranching in mixed bedrock-alluvial rivers: the example of the Orange River above Augrabies Falls, Northern Cape Province, South Africa

Anabranching is characteristic of a number of rivers in diverse environmental settings worldwide, but has only infrequently been described from bedrock-influenced rivers. A prime example of a mixed bedrock-alluvial anabranching river is provided by a 150-km long reach of the Orange River above Augrabies Falls, Northern Cape Province, South Africa. Here, the perennial Orange flows through arid terrain consisting mainly of Precambrian granites and gneisses, and the river has preferentially eroded bedrock joints, fractures and foliations to form multiple channels which divide around numerous, large (up to 15 km long and 2 km wide), stable islands formed of alluvium and/or bedrock. Significant local variations in channel-bed gradient occur along the river, which strongly control anabranching style through an influence on local sediment budgets. In relatively long (>10 km), lower gradient reaches (<0.0013) within the anabranching reach, sediment supply exceeds local transport capacity, bedrock usually only crops out in channel beds, and channels divide around alluvial islands which are formed by accretion in the lee of bedrock outcrop or at the junction with ephemeral tributaries. Riparian vegetation probably plays a key role in the survival and growth of these islands by increasing flow roughness, inducing deposition, and stabilising the sediments. Less commonly, channels may form by eroding into once-continuous island or floodplain surfaces. In shorter (<10 km), higher gradient reaches (>0.0013) within the anabranching reach, local transport capacity exceeds sediment supply, bedrock crops out extensively, and channels flow over an irregular bedrock pavement or divide around rocky islands. Channel incision into bedrock probably occurs mainly by abrasion, with the general absence of boulder bedforms suggesting that hydraulic plucking is relatively unimportant in this setting. Mixed bedrock-alluvial anabranching also occurs in a number of other rivers worldwide, and appears to be a stable and often long-lived river pattern adjusted to a number of factors commonly acting in combination: (1) jointed/fractured granitoid rock outcrop; (2) erosion-resistant banks and islands; (3) locally variable channel-bed gradients; (4) variable flow regimes.