Effect of core porosity on stability and run-up of breakwaters

The commonly used formulae like Hudson's [(1959), Laboratory investigations of rubblemound breakwaters. WES report, Vicksburg], Iribarren's or Vander meer's [(1988), Rockslopes and gravel beaches under wave attack. Ph.D. thesis, Delft University of Technology, The Netherlands], do not give us the design cross section of a rubblemound breakwater for varying core porosity values. The paper presents the results of the experimental study carried out to compute the effects of core porosity on the stability and run-up characteristics of rubblemound breakwaters. Regular waves were made to attack the structure, with different core porosity values in a normal direction. The porosity of the armour and the secondary layers was neglected. It was observed that as core porosity increased the stability also increased considerably within the limits of the experimental data values. This may be due to large inflow and energy dissipation within the core of the structure. The run-up on the rubblemound slope was found to decrease with the increase in the porosity for the same reason.     

The status of geological dredging techniques

Scientific sea-floor dredging is currently used in marine geology primarily by the hard-rock community interested in the recovery of basement rock samples from the unsedimented deep ocean floor. The technique has generally been eclipsed by ocean drilling for recovery of sedimentary rocks, because of perceived uncertainties in the location of sampling and in the representativeness of recovered material. This contribution reviews dredging equipment currently in use by marine geological institutions and refers to pinger attachments that allow precise information on the behaviour of the dredge to be telemetered back to the ship. We argue that improvements in ship navigation and transponder navigation at the seafloor, when used in conjunction with surface and/or deeply towed sidescan and swathemapping surveys, now allow for considerably less uncertainty on the location of dredge sampling. Refined sorting criteria for dredge hauls are now also available. Recent comparisons of regional sample recovery by ocean drilling and by dredge sampling indicate that the dredge hauls can usefully supplement the drilling data in the construction of sedimentary and tectonic histories of seafloor areas.     

Extension of the Narmada — Son lineament on the continental margin off Saurashtra,Western India as obtained from magnetic measurements

Magnetic total intensity values and bathymetric data collected on the continental margin off Saurashtra were, used to prepare magnetic anomalies and bathymetric contour maps. The magnetic anomalies are considered to have been caused by the Deccan Trap flood basalts which underlie the Tertiary sediments. Interpretation of the magnetic data using two-dimensional modelling method suggests that the magnetic basement is block faulted and deepens in steps from less than 1.0 km in the north to about 8.0 km towards the southern portion of the study area. The WNW-ESE trending faults identified in the present study extend across the Saurashtra continental margin between Porbandar and Veraval and appear to represent a major linear tectonic feature. The relationship of these fault lineaments with the regional tectonic framework have been discussed to indicate that they conform better as the northern boundary faults of the Narmada rift graben on the continental margin off Saurashtra.     

Wave drift enhancement effects in multi column structures

A theoretical assessment is made of mean wave drift forces on groups of vertical circular cylinders, such as the columns of a floating offshore platform. A complete analytical solution is obtained for two cylinders extending from seabed to free surface, and a long wave approximation is found to provide reliable predictions of the drift force in line with the waves at low frequencies. For moderate separation between the two cylinders, this force is found to tend at low frequencies to a value four times the force on an isolated cylinder.A numerical method is employed to study two surface piercing cylinders truncated below the free surface, and an arrangement of four vertical cylinders characteristic of a floating offshore platform. The mean vertical drift force is found to be reasonably well approximated, over the frequency range of practical interest, by the force on an individual cylinder considered in isolation multiplied by the number of cylinders in the group. Interaction effects, however, have a profound influence on the total horizontal drift force. At low frequencies this force is found to tend to the force on an isolated cylinder multiplied by the squate of the number of cylinders in the group.     

An experimental investigation of plunging breaker boundary layers in the transformation zone

Experimental investigation is made on the boundary layers of the transformation zone (i.e. the region between the last symmetrical wave profile depth and the breaking point) of plunging breakers propagating on a smooth beach with 1/12 uniform slope. Using a laser anemometer, the particle velocities are measured at four verticals along the transformation zone for three different steepnesses of waves within the plunging breaker range. The boundary layer flow in the transformation zone is found mostly of turbulent character and vertical distribution of particle velocities does not seem to conform to the classical law of the wall distribution given for steady-flow boundary layers. The results show that free-stream particle velocities, in the boundary layer of the breaker under the crest phase, increase considerably as the wave progresses towards the breaking point. The boundary layer thickness, defined as the velocity-affected region, remains constant throughout the transformation zone but it decreases with increasing deep-water wave steepness for the particular beach slope tested.     

Accumulation and effects of organotin compounds in oysters and mussels: Correlation with serum biochemical and cytological factors and tissue burdens

Oysters and mussels exposed to a concentration of 0·7 ppb (μg/liter) tributyltin from painted panels in flowing seawater accumulated tin in the digestive glands to comparable levels. The mussels experienced approximately 50% mortality during the 60-day test period, but the oysters suffered virtually no deaths. There was no evidence from either bivalve of elevated numbers of hemocytes during the test period and no evidence for cellular disruption as detected by increased levels of serum lysosomal hydrolases. Serum protein of exposed mussels relative to controls increased with time of exposure to the toxicant, while oyster serum protein, normally 10 x higher than in mussels, did not. No evidence was found for elevated stress proteins (heat shock proteins) or metallothioneins in the serum hemocytes of either bivalve. Responses by these animals to fatal or near fatal doses of TBT were thus very different from responses to copper that we have reported elsewhere.^1,2     

Upwelling in the Black Sea by the results of numerical experiments and satellite data

The paper analyses results of the numerical simulation of upwelling events in the north-western part of the Black Sea, mostly near the South Crimea. The calculations were performed using a numerical model based on primitive hydrodynamics equations. Emphasis is laid on the case when a salinity front simulating the Black Sea rim current is prescribed in the initial conditions. The interaction of the Black Sea rim current's stream with the coastline and bottom topography leads to the development of an upwelling near the Crimea's coast, even in the absence of wind forcing. The paper discusses the structure of the three-dimensional circulation of waters in the shelf area of the NW Black Sea. Numerical modelling results are matched up with the satellite data obtained by the HRPT receiving station. Translated by Vladimir A. Puchkin.     

The effect of currents on the generation of internal waves by a barotropic tide near an underwater ridge

In the frame of the linear theory for long waves, the paper studies long waves generated by a barotropic tide running at an arbitrary angle over a bottom ridge. The ocean is assumed to be two-layered. In the area of a ridge with a rectangular cross section, geostrophic flows are considered, coupled with the inclinations of the free surface and interface. Wave amplitudes are shown to depend on the angle of an onrunning tide and this allows us to reach a conclusion about the influence of a geostrophic current on the generation of internal waves. Translated by Vladimir A. Puchkin.