An analysis of failure mechanism constraints on pre-failure rock block deformation using TLS and roto-translation methods

Rockfall hazards increase the risk of train derailment along railway corridors in western Canada. In this study, repeated terrestrial laser scanning (TLS) datasets were collected every 2–3 months at three different sites along the Thompson and Fraser River corridors in British Columbia, referred to as the Goldpan, White Canyon, and Mile 109 sites. A total of 207 rockfall events occurring across all three sites between November 11, 2014 and October 18, 2016 were recorded in a database. For each of these rockfalls, pre-failure deformation was measured using a method of three-dimensional roto-translation block tracking. Each rockfall was classified by its deformation behaviour and further categorised based on failure mechanism, volume, lithology, and the roughness condition of the failure plane. Results reveal that detectable levels of deformation were measured in 33% of the total number of rockfall events using the present methods. Rotation deformation was most commonly observed in toppling failures with relatively steep joint orientations. Conversely, planar sliding blocks generally exhibited the least measurable deformation, with the majority not showing any precursory translation or rotation. It is postulated that overhanging rockfall configurations may suppress the expression of deformation in rockfall source blocks, though additional research is required to confirm this.     

Textural and micro-analytical insights into mafic–felsic interactions during the Oruanui eruption,Taupo

Quenched juvenile mafic inclusions (enclaves) are an occasional but informative component in the deposits of large felsic eruptions. Typically, the groundmasses of these inclusions rapidly crystallize as the mafic magma is chilled against a more voluminous, cooler felsic host, providing a physical and chemical record of the nature and timing of mafic–felsic interactions. We examine mafic inclusions of two compositional lineages (tholeiitic and calc-alkaline) from deposits of the 25.4 ka Oruanui eruption (Taupo, New Zealand). 2-D quantitative textural data from analysis of back-scattered electron images reveal a marked diversity in the groundmass textures of the inclusions, including median crystal sizes (amphibole: 14–45 µm; plagioclase: 21–75 µm) and aspect ratios (amphibole: 1.7–4.2; plagioclase: 2.1–4.0), area number densities (amphibole: 122–2660 mm^?2; plagioclase: 117–2990 mm^?2), area fractions (?) of minerals (?_plag?=?23–45%, ?_amph?=?0–28%, ?_cpx?=?0–6%, ?_oxides?=?0.6–5.5%), and the relative abundance of plagioclase and amphibole (?_plag/?_amph?=?1.0–4.6). Textural parameters vary more significantly within, rather than between, the two compositional lineages, and in some cases show marked variations across individual clasts, implying that each inclusion’s cooling history, rather than bulk composition, was the dominant control on textural development. Groundmass mineral compositions are also diverse both within and between inclusions (e.g. plagioclase from An_34–92, with typical intra-clast variability of ~?20 mol%), and do not correlate with bulk chemistry. Diverse groundmass textures and mineral and glass chemistries are inferred to reflect complex interplay of a range of factors including the degree and rate of undercooling, bulk composition, water content and, possibly, intensive variables. Our data are inconsistent with breakup of a crystallizing ponded mafic layer at the base of the Oruanui melt-dominant body, instead implying that each inclusion partially crystallized as a discrete body with a unique cooling history. Extensive ingestion of mush-derived macro-crystals suggests that mechanical breakup of mafic feeder dikes occurred within a transition zone between the mush and melt-dominant magma body. In this zone, the mush lacked yield strength, as has been inferred from field studies of narrow (meters to few tens of meters) mush-melt transition zones preserved in composite intrusions. Evidence for plastic deformation of inclusions during eruption and the abundance of fresh residual glass in inclusions from all eruptive phases suggest that the inclusions formed syn-eruptively, and must have been formed recurrently at multiple stages throughout the eruption.     

The origins of marine and non-marine boulder deposits: a brief review

Natural Hazards - We identify 14 mechanisms, marine and non-marine, one man made, that result and could result in the formation of boulder deposits after reviewing issues associated with clast...     

Reducing wind power curtailment in China: comparing the roles of coal power flexibility and improved dispatch

Renewable energy curtailment is a critical issue in China, impeding the country’s transition to clean energy and its ability to meet its climate goals. This paper analyzes the impacts of more flexible coal-fired power generation and improved power dispatch towards reducing wind power curtailment. A unit commitment model for power dispatch is used to conduct the analysis, with different scenarios demonstrating the relative impacts of more flexible coal-fired generation and improved power dispatch. Overall, while we find both options are effective in reducing wind power curtailment, we find that improved power dispatch is more effective: (1) the effect of ramping down coal-fired generators to reduce wind power curtailment lessens as the minimum output of coal-fired generation is decreased; and (2) as a result, at higher wind capacity levels, wind curtailment is much more significantly reduced with improved power dispatch than with decreased minimum output of coal-fired generation.

Key policy insights

• China should emphasize both coal power flexibility and dispatch in its policies to minimize renewable power curtailment and promote clean energy transition.

• China should accelerate the process of implementing spot market and marginal cost-based economic dispatch, while making incremental improvements to the existing equal share dispatch in places not ready for spot market.

• A key step in improving of dispatch is incorporating renewable power forecasts into the unit commitment process and updating the daily unit commitment based on the latest forecast result.

• China should expand the coal power flexibility retrofit programme and promote the further development of the ancillary service market to encourage more flexibility from coal-fired generation.

     

Hydrogen fluence in Genesis collectors: Implications for acceleration of solar wind and for solar metallicity

NASA's Genesis mission was flown to capture samples of the solar wind and return them to the Earth for measurement. The purpose of the mission was to determine the chemical and isotopic composition of the Sun with significantly better precision than known before. Abundance data are now available for noble gases, magnesium, sodium, calcium, potassium, aluminum, chromium, iron, and other elements. Here, we report abundance data for hydrogen in four solar wind regimes collected by the Genesis mission (bulk solar wind, interstream low‐energy wind, coronal hole high‐energy wind, and coronal mass ejections). The mission was not designed to collect hydrogen, and in order to measure it, we had to overcome a variety of technical problems, as described herein. The relative hydrogen fluences among the four regimes should be accurate to better than ±5–6%, and the absolute fluences should be accurate to ±10%. We use the data to investigate elemental fractionations due to the first ionization potential during acceleration of the solar wind. We also use our data, combined with regime data for neon and argon, to estimate the solar neon and argon abundances, elements that cannot be measured spectroscopically in the solar photosphere.     

Flexural deformation controls on Late Quaternary sediment dispersal in the Garo-Rajmahal Gap,NW Bengal Basin

Subsurface deformation is a driver for river path selection when deformation rates become comparable to the autogenic mobility rate of rivers. Here we combine geomorphology, soil and sediment facies analyses, and geophysical data of the Late Quaternary sediments of the central Garo-Rajmahal Gap in Northwest Bengal to link subsurface deformation with surface processes. We show variable sedimentation characteristics, from slow rates (<0.8 mm/year) in the Tista megafan at the foot of the Himalaya to nondeposition at the exposed surface of the Barind Tract to the south, enabling the development of mature soils. Combined subsidence in the Tista fan and uplift of the Barind Tract are consistent with a N-S flexural response of the Indian plate to loading of the Himalaya Mountains given a low value of elastic thickness (15–25 km). Provenance analysis based on bulk strontium concentration suggests a dispersal of sediment consistent with this flexural deformation—in particular the abandonment of the Barind Tract by a Pleistocene Brahmaputra River and the current extents of the Tista megafan lobes. Overall, these results highlight the control by deeply rooted deformation patterns on the routing of sediment by large rivers in foreland settings.     

The Distribution of Chadian and earliest Arundian strata in North Wales: Implications for Dinantian (Carboniferous) lithostratigraphy and palaeogeography

The late Chadian Foel Formation, previously thought to be confined to the Dyserth area of North Wales, forms a poorly exposed but persistent basal unit to much of the Dinantian crop east of the Clwydian Range, necessitating a revision of the local lithostratigraphy. The formation comprises a peritidal heterolith which, together with the lowest few metres of the overlying Llanarmon Limestone, yields microfossil assemblages diagnostic of the Eoparastaffella Cf4α Subzone. Succeeding strata, containing the lowest archaediscid foraminifera, provide the first record of Cf4β assemblages from North Wales and establish an early Arundian age for these beds. The Foel Formation was deposited as an aggradational sequence on the northern flank of St. George's Land during a pulsed transgression which began in late Chadian times. The widely recognized basal Arundian transgression is represented by the contact between the Foel Formation and overlying platform carbonates. The latter overlap the Foel Formation in the southernmost part of the Clwydian crop demonstrating, for the first time, southwards onlap on the northern side of the Bala–Bryneglwys Fault System.     

Evaluating the Geographic in GIS

Despite several decades of discussion and debate around the role of GIS in the discipline of Geography, it would be a stretch to argue that GIS has not irreversibly altered the discipline, both in the scope of research and teaching as well as in the wider imagination of a general public. However, it remains a challenge to incorporate the range of geographic knowledge, born of a diversity of modalities, into operational insights and analytical pre‐conditions in a GIS. To be certain, some irreconcilability between GIS and geographical inquiry is to be expected, epistemologically speaking. In what follows, we consider what might be meant by a shift to geographic analysis as scholars from disciplines in the humanities and social sciences turn to GIS as a method of observation, interpretation, analysis, and representation. In this context, we engage in a thought experiment and offer some commentary, fixing the notion of information system, while opening the geographic in GIS to more variable understanding. The point is to pursue greater development of GIS theory and method, encompassing, while not reducing, scientific, social scientific, and humanities research.     

Peaks of People: Using Topographic Prominence as a Method for Determining the Ranked Significance of Population Centers

This article borrows a statistical method from physical geography—topographical prominence—to suggest a new technique for measuring the relative significance or rank of population centers. Unlike raw population measures, prominence gives consideration to both the spatial intensity of concentrated population areas as well as the spatial dependence or independence of neighboring settlement clusters in relation to one another. We explain how to apply the topographic prominence calculation method to gridded population data and examine its practical utility through case studies of several U.S. states. We then discuss some ways in which parametric choices about point-to-surface transformations can result in considerably different outcomes and offer further suggestions for conceptualizing and measuring population center significance.