Changing roles controlling alternating marine and aeolian deposition and formation of Quaternary sequences in Hergla coastal escarpment (north-eastern Tunisia)

This work is meant to set a new stratigraphic framework of the Quaternary Hergla Sea Cliff deposits in eastern Tunisia including vital precisions concerning depositional environments and climatic conditions. Infrared stimulated luminescence (IRSL) data previously obtained at the Hergla region show that the Khniss unit is Tyrrhenian in age (MIS 5.5), while the Rejiche unit dates to the MIS 5.3/5.1 undifferentiated by the IRSL for the marine deposits and attributed to the MIS 4 for the dunes continental deposits. The sedimentological studies showed that the whole of the marine units of the Upper Pleistocene of Hergla were deposited in a shallow marine environment and also highlighted at least two major transgressive cycles interrupted by drops of the sea level leading to emergence. The first cycle corresponds to the Khniss unit deposit. The second cycle corresponds to the transgression of the Rejiche unit. The end of the MIS 5.5 is marked by a lagoonal sedimentation with a regressive tendency followed by an emergence period materialized by the presence of a paleosol. During the MIS 5.3/5.1, the marine deposits of the Rejiche unit correspond to infratidal carbonate sediments subjected to storms currents. They are characterized by the reworking of lithoclasts, due to the action of the storm currents. Eventually, the study of cements in the continental deposits of the Rejiche unit indicates a late evolution in a continental vadose environment, subjected to the action of meteoric waters. In terms of climatic conditions, the MIS 5.5 was hotter and wetter than the subsequent MIS 5.3/5.1.     

Determination of the thicknesses of oil films in micro- and nano-pores in tight oil sands: an example from the southern Songliao Basin,NE China

An experimental method of field-emission environmental scanning electron microscope (ESEM) coupled with the energy dispersive spectrum (EDS) to determine the thickness of oil films in the micro- and nano-pores of tight oil sands was proposed to overcome the limitations of current methods. First, we got the data of the detection range volumes, elemental mass percentages, and elemental atomic percentages using the EDS, and then calculated the volumes of oil films in the detection range according to the elemental mass percentages and the elemental atomic percentages of carbon. After that, we calculated the surface areas of oil films using the pore size data (lengths, widths, and depths) detected by ESEM. The thicknesses of oil films in the pores equaled the volumes divided by the surface areas. An analysis of tight oil samples from the Quan 4 Segment of in the southern Songliao Basin, NE China confirmed that the oil in the micro- and nano-pores had two main forms: oil films and oil droplets. The thicknesses of the oil films ranged from about 400 nm to 2 μm, while the thicknesses of the oil droplets ranged from about 200 to 700 nm.     

Hydrodynamic characteristics of floating toroidal bodies

The paper deals with the linearized exciting wave forces and hydrodynamic coefficients of a toroidal body floating in water of finite depth. For the solution of the diffraction and the radiation problems the flow field around the body is subdivided into ring-shaped fluid regions, in each of which axisymmetric eigenfunction expansions for the velocity potential is made. By implementing Galerkin's method the various potential solutions are matched and numerical results concerning the exciting wave forces and the hydrodynamic coefficients in all modes of motion are obtained.     

Characterization of the mechanical properties of a claystone by nano-indentation and homogenization

Based on the analyses of mineralogical compositions by X-ray diffraction and microstructure by optical microscopy, the Young’ modulus and hardness of a claystone were characterized by the nano-indentation technique and homogenization method. Three distinct microstructural zones are identified in the claystone: clay matrix, a composite matrix of clay and small mineral grains and imbedded quartz grains. The elastic modulus and hardness of different zones were determined by nano-indentation testing. Based on the statistical analysis of nano-indentation results, the spatial mappings and frequency distributions of elastic modulus and hardness of the different zones were obtained. The elastic moduli of main constituent phases of the claystone are then estimated from the nano-indentation tests. These values were further used for the determination of the macroscopic elastic modulus of the claystone using two different homogenization schemes: the dilute scheme and Mori–Tanaka scheme. The predicted values by the homogenization schemes are compared with experimental data obtained from conventional uniaxial compression tests.     

Periodical mixing of MORB magmas near East Pacific Rise 13°N: Evidence from modeling and zoned plagioclase phenocrysts

Thirty-six basalt samples from near East Pacific Rise 13°N are analyzed for major and trace elements. Different types of zoned plagioclase phenocrysts in basalts are also backscatter imaged, and major element profiles scanned and analyzed for microprobe. Basalts dredged from a restricted area have evolved to different extents (MgO=9.38wt%—6.76wt%). High MgO basalts are modeled for crystalliza-tion to MgO of about 7wt%, and resulted in the Ni contents (≈28 ppm) that are generally lower than that in observed basalts (>60 ppm). It suggests that low MgO basalts may have experienced more intensive magma mixing. High MgO (9.38wt%) basalt is modeled for self-"mixing-crystallization", and the high Ni contents in low MgO basalts can be generated in small scale and periodical self-mixing of new magma (high MgO). "Mixing-crystallization" processes that low MgO magmas experienced accord with recent 226Ra/230Th disequilibria studies for magma residence time, in which low MgO magmas have experi-enced more circles of "mixing-crystallization" in relatively longer residence time. Magma mixing is not homogeneous in magma chamber, however, low MgO magmas are closer to stable composition pro-duced by periodical "mixing-crystallization", which is also an important reason for magma diversity in East Pacific Rise. Zoned plagioclase phenocrysts can be divided into two types: with and without high An# cores, both of which have multiple reversed An# zones, suggesting periodical mixing of their host magmas. Cores of zoned plagioclase in low MgO (7.45wt%) basalt differ significantly with their mantle in An#, but are similar in An# with microlite cores (products of equilibrium crystallization) in high MgO (9.38wt%) basalt, which further shows that plagioclase phenocryst cores in low MgO basalts may have formed in their parental magmas before entering into the magma chamber.     

Diurnal SST warming in the Bay of Biscay: satellite measurements and model prediction

INTRODUCTIONIt has long been recognized that a diurnal thermal cycle occurs in the upper layer of the ocean(Stommel et al., 1969; Price and Weller, 1986). Interest in the subject has revived in recentyears due to the importance of resolving the diurnal cycle for correctly coupling the ocean and atmosphere (Lukas, 1991 ). While the study of the diurnal cycle is of intrinsic scientific interest, italso offers the benefit to remote sensing scientists of identifying the bias caused by the di…     

Sedimentary Deposits from the 17 July 2006 Western Java Tsunami,Indonesia: Use of Grain Size Analyses to Assess Tsunami Flow Depth,Speed, and Traction Carpet Characteristics

The 2006 western Java tsunami deposited a discontinuous sheet of sand up to 20 cm thick, flooded coastal southern Java to a depth of at least 8 m and inundated up to 1 km inland. In most places the primarily heavy mineral sand sheet is normally graded, and in some it contains complex internal stratigraphy. Structures within the sand sheet probably record the passage of up to two individual waves, a point noted in eyewitness accounts. We studied the 2006 tsunami deposits in detail along a flow parallel transect about 750 m long, 15 km east of Cilacap. The tsunami deposit first becomes discernable from the underlying sediment 70 m from the shoreline. From 75 to 300 m inland the deposit has been laid down in rice paddies, and maintains a thickness of 10–20 cm. Landward of 300 m the deposit thins dramatically, reaching 1 mm by 450 m inland. From 450 m to the edge of deposition (around 700 m inland) the deposit remains <1 mm thick. Deposition generally attended inundation—along the transect, the tsunami deposited sand to within about 40 m of the inundation limit. The thicker part of the deposit contains primarily sand indistinguishable from that found on the beach 3 weeks after the event, but after about 450 m (and roughly coinciding with the decrease in thickness) the tsunami sediment shifts to become more like the underlying paddy soil than the beach sand. Grain sizes within the deposit tend to fine upward and landward, although overall upward fining takes place in two discrete pulses, with an initial section of inverse grading followed by a section of normal grading. The two inversely graded sections are also density graded, with denser grains at the base, and less dense grains at the top. The two normally graded sections show no trends in density. The inversely graded sections show high density sediment to the base and become less dense upward and represents traction carpet flows at the base of the tsunami. These are suggestive of high shear rates in the flow. Because of the grain sorting in the traction carpet, the landward-fining trends usually seen in tsunami deposits are masked, although lateral changes of mean sediment grain size along the transect do show overall landward fining, with more variation as the deposit tapers off. The deposit is also thicker in the more seaward portions than would be produced by tsunamis lacking traction carpets.     

Comparison of different models of water quality index in the assessment of surface water quality

The method of water quality index is widely used in evaluation of the surface water quality because of its capability to summarize a number of water quality parameters into one numeric value, along with defined scale of water quality range. The current investigation includes application of modified model for calculating water quality index values, generated using experimental data and literary models. Software was created using modular design. Fourteen physical, chemical and biological parameters representing water quality state along with the assigned weights were elected. Comparison between models generated based on Serbian and American models of water quality index was done. Selected parameters differ mutually in number of parameters used in calculation of index, as well as in values of the weighting factors. In order to enable an efficient water quality analysis and to reconcile the requirements of both Serbian and American model, two software solutions were generated and processed on the example of the water quality of the Danube River in Serbia. Danube water quality was assessed at seventeen measuring locations along the river flow. Index values obtained from the two generated software applications were compared with the results of the official Serbian online calculator. Water quality determined using new generated models shows stricter approach and one class lower water quality compared to the existing Serbian model. Therefore, modular and open-generated simulation software is of great significance for the comparison and testing of different water quality models, not just those two shown in this study.