SLJ-100DH型井下数字三分向力平衡加速度计装置研制

介绍了新研制的井下数字三分向力平衡加速度计装置技术性能、工作原理,分析讨论了仪器的特点。     

超高强混凝土短柱抗震性能的试验研究

通过对12根剪跨比λ=2．0的超高强混凝土短柱在低周反复荷载下抗震性能的试验研究,分析了其破坏形态,并研究了轴压比和配箍率对试件滞回特性和抗震延性的影响,提出了满足一定延性要求（μ△≥3．0）超高强混凝土短柱的轴压比限值和箍筋加密区的最小配箍特征值的建议值。该值可为现行规范的修订提供参考。     

A comparative study between China and U.S. on seismic design philosophy and practice of a long span arch bridge

This paper presents the first of a series of case studies on the seismic design of long span bridges （cable-stayed bridges, suspension bridges and arch bridges） under a cooperative research project on seismic behavior and design of highway bridges between the State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University and the Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo. The objective of this series of case studies is to examine the differences and similarities on the seismic design practice of long span bridges in China and the U.S., to identify research needs and to develop design guidelines beneficial to bridge engineers in both countries. Unlike short to medium span bridges, long span bridges are not included in most seismic design specifications, mainly because they are location dependent and structurally unique. In this paper, an available model of a steel tied half through arch bridge with a main span of 550m in China is discussed. Analysis is focused on comparisons of the seismic responses due to different ground motions. Seismic design criteria and seismic performance requirements for long span bridges in both countries were first introduced and compared, and then three near field earthquake records with large vertical components were selected as the excitations to examine the seismic behavior and seismic vulnerability of the bridge. Results show that （1） the selected near field ground motions cause larger responses to key components （critical sections） of the bridge （such as arch rib ends） with a maximum increase of more than twice those caused by the site specific ground motions; （2） piers, longitudinal girders and arch crowns are more vulnerable to vertical motions, especially their axial forces; and （3） large vertical components of near field ground motions may not significantly affect the bridge＇s internal forces provided that their peak acceleration spectra ordinates only appear at periods of less than 0.2s. However, they may have more influence on the longitudinal displacements of sliding bearings due to their large displacement spectra ordinates at the fundamental period of the bridge.     

Kinematic source model for simulation of near-fault ground motion field using explicit finite element method

1 Introduction The prediction of broadband near-fault ground motion is an important aspect of seismic risk analysis, and is essential for the evaluation of urban seismic safety. Many methodologies are used to model the near-fault ground motions, such as the Green function method, ?nite element (FE) / ?nite difference (FD) method and a hybrid method (Aagaard, 1999; Oprsal and Zahradnik, 2002; Oprsal et al., 2003 a and b). In the hybrid method, the FE / FD method is used to model the low fr…     

藏北安多-巴青地区侏罗纪含礁层系岩相及沉积环境

根据岩性及其组合特征,本文将西藏北部安多—巴青地区侏罗纪含礁地层划分为流水成因的颗粒岩岩相、流水成因的碎屑岩岩相、复成因的泥晶—泥质灰岩岩相、生物及生物化学成因的障积岩岩相、生物及生物化学成因的粘结—障积岩岩相和生物及生物化学成因的骨架岩岩相等6大类型,计16种岩相。它们构成了潮坪相组合、台地浅滩相组合、开阔台地相组合和台地生物礁相组合共4种岩相组合,并由下而上有规律地形成2种岩相序列,即陆源碎屑与碳酸盐混合台地相序列和碳酸盐台地相序列。     

Synthesis of Pb-Feldspar by Ion Exchange Reaction and Its Implications

Feldspar and Pb（NO3）2 were mixed and reacted at T=380℃ to synthesize Pb-feldspar. In the XRD （X-ray diffraction） pattern of the product, the d values （crystal lattice spacing） of the five peaks are 0.654, 0.342, 0.332, 0.327 and 0.257 nm. The XPS analysis results show that the binding energy of Pb 4f（7/2） in the feldspar was between 137.81-138.03 eV. Pb^2＋ can replace alkali and alkali earth cations in the feldspar structure through ion exchange reaction to form Pb-feldspar.     

新一代天气雷达轴角盒故障的分析处理

CINRAD/SA天气雷达在PPI扫描过程中天线来回摆动,导致雷达无规律出现方位扇形范围无回波,雷达不能正常发挥其有效作用。为查找故障原因,从新一代天气雷达伺服系统信号流程入手,结合雷达基数据分析软件,分析雷达天线运行轨迹,通过信号流程中关键点参数的测量和比较,发现问题出现在轴角编码盒方位环节,导致轴角盒串行方位轴角数据输出不连续,造成雷达无规律出现方位扇形范围无回波。通过对此类故障分析思路与处理经验的总结,对台站级雷达技术保障提供借鉴。     

西北区域气象计量实验室综合能力比对结果分析

分析评价西北区域参加实验室比对的试验结果,及时发现问题并进行纠正,总结实施实验间比对工作的经验,提高实验室检定/校准能力和质量管理水平。参加比对的计量检定实验室分别对气压、温度、湿度、风速比对样品进行比对试验,用归一化偏差(En)进行统计分析。2011年西北区域气象计量检定的温度、湿度、气压实验室比对结果为满意,风速实验室比对结果为较满意。该次比对的实验数据客观、真实、可信,是对各参加比对实验室检定/校准能力的综合评价,较为客观地反映了各技术机构检定装置的测量能力、检定人员的技术水平以及西北区域气象计量标准装置的现状。     

理想点法在矿床工业价值评价中的应用

应用理想点法的基本原理,建立了一个矿床工业价值评价的数学模型,以我国贵州省兴义市雄武地区铀矿床为实例,构造评价函数得出最优解,结果表明:理想点法能够正确评价出矿床工业价值的大小,为矿石的最优开采提供有价值的参考。