Evaluation of the Global Mean Sea Level Budget between 1993 and 2014

Evaluating global mean sea level (GMSL) in terms of its components—mass and steric—is useful for both quantifying the accuracy of the measurements and understanding the processes that contribute to GMSL rise. In this paper, we review the GMSL budget over two periods—1993 to 2014 and 2005 to 2014—using multiple data sets of both total GMSL and the components (mass and steric). In addition to comparing linear trends, we also compare the level of agreement of the time series. For the longer period (1993–2014), we find closure in terms of the long-term trend but not for year-to-year variations, consistent with other studies. This is due to the lack of sufficient estimates of the amount of natural water mass cycling between the oceans and hydrosphere. For the more recent period (2005–2014), we find closure in both the long-term trend and for month-to-month variations. This is also consistent with previous studies.     

Superposition of burial and hydrothermal events: post‐Variscan thermal evolution of the Erzgebirge,Germany

The post‐Variscan thermal history of the Erzgebirge (Germany) is the result of periods of sedimentary burial, exhumation and superimposed hydrothermal activity. The timing and degree of thermal overprint have been analysed by zircon and apatite (U–Th)/He and apatite fission track thermochronology. The present‐day surface of the Erzgebirge was exhumed to a near‐surface position after the Variscan orogeny. Thermal modelling reveals Permo‐Mesozoic burial to temperatures of up to 80–100 °C, although the sedimentary cover thins out towards the north resulting in maximum burial temperatures of less than 40 °C. This thermal pattern was locally modified by Cretaceous hydrothermal activity that reset the zircon (U–Th)/He thermochronometer along ore veins. The thermal models show no significant regional exhumation during Cenozoic times, indicating that the peneplain‐like morphology of the basement is a Late Cretaceous feature.     

Identification of magnetic Fe–Ti oxides in marine sediments by electron backscatter diffraction in scanning electron microscopy

In paleomagnetic and environmental magnetic studies the magnetomineralogical identification is usually based on a set of rock magnetic parameters, complemented by crystallographic and chemical information retrieved from X-ray diffraction (XRD), (electron) microscopy or energy dispersive spectroscopy (EDS) of selected samples. While very useful, each of these supplementary techniques has its limitations when applied to natural sample material which are related to low particle concentrations (down to the ppm range in marine sediments) and very fine grain sizes (down to the nm scale). Therefore, meaningful application of such techniques depends on sample quality. Electron backscatter diffraction (EBSD) of individual grains in scanning electron microscopy (SEM) enables mineralogical identification of grains down to ∼0.2 micrometer and is particularly powerful when combined with EDS. In this study, we show the merits of EBSD for rock magnetic investigations by analyzing titanomagnetites and hemoilmenites of various compositions and submicron lamella of titanomagnetite–hemoilmenite intergrowths. Such particles often occur in natural marine sediments where EDS often has a semi-quantitative character and compositionally similar intergrowths may be difficult to distinguish. With the mineralogical information provided by EBSD unambiguous identification of spinel-type and trigonal oxides is obtained. Optimal EBSD patterns are gathered from smooth, polished surfaces, but here we show that interpretable EBSD patterns can be obtained directly from the surface of unconsolidated, so called 'non-embedded' particles from marine sediments. This information enhances the interpretative value of rock magnetic parameters.     

Provenance of Palaeo‐Rhine sediments from zircon thermochronology,geochemistry, U/Pb dating and heavy mineral assemblages

Sediments deposited in the Late Cenozoic basins of the Central European Rift System, including the Upper Rhine Graben (URG) and the Lower Rhine Embayment (LRE), document the drastic extension of the Rhine's catchment towards the Central Alps in the Late Pliocene by distinct heavy mineral assemblages. This outstanding change in principal sediment sources should be accompanied by a change towards distinctly younger (i.e. Tertiary) detrital mineral cooling ages. Therefore, it provides a particularly well‐suited framework to explore the thermochronological provenance record in relation to heavy mineral assemblages. In this multi‐proxy approach we (i) exploit and elaborate detrital zircon (U–Th)/He thermochronology (ZHe) for sediment provenance surveys, (ii) document shortcomings if only a single geochronological method is employed, and (iii) obtain tighter constraints on the sources of Paleo‐Rhine sediments. Our results are based on Pliocene and Pleistocene sediment samples from the northern URG (drill core Ludwigshafen P36) and the LRE (lignite mine Hambach). In a Late Pliocene URG sample, Variscan and Permo‐Triassic cooling ages dominate the age spectra of the ZHe and Zircon fission track (ZFT) thermochronometers. The youngest ages are Late Cretaceous and these zircons show rare earth element signatures that suggest derivation from hydrothermally affected basement rocks of the URG margins. In contrast, a Lower Pleistocene URG sample contains significant Tertiary age components that unequivocally indicate Alpine sources. This cardinal difference coincides well with a significant change in the heavy mineral assemblage. The extension of the catchment of the Rhine towards the Central Alps is considered to occur no earlier than the latest Pliocene (i.e. after ~3.0 Ma). Despite strongly contrasting heavy mineral compositions, the Pliocene and Pleistocene samples from the LRE show largely similar ZHe and ZFT age distributions dominated by Permo‐Triassic and Variscan ages. Admixture of zircon‐dominated, but overall heavy mineral‐poor sediment derived from local drainages of the Rhenish Massif likely explains this apparent contradiction in sediment provenance proxies. Tertiary cooling ages occur in both Pliocene and Pleistocene LRE samples. Zircon Th/U ratios and U/Pb ages reveal that the young age component in Late Pliocene sediments from the LRE is not derived from the Alps but from Oligocene trachytic members of the Central European volcanic centres of the Vogelsberg, Westerwald, and/or Siebengebirge. The integration of ZHe and ZFT techniques with zircon geochemistry and U/Pb geochronology adds the respective advantages of each method and allows for a very detailed picture of detrital zircon provenance.     

Holocene trophic state changes in relation to sea level variation in Lake Blanca, SE Uruguay

Paleolimnological data are presented relating trophic development to sea level variation in Lake Blanca, a small (0.6 km²), coastal fresh waterbody in southern Uruguay. Using a sediment core that extended to 7300 years BP, analyses of grain size, thin sections, organic matter, carbonate, total carbon, nutrients, diatoms and palynomorphs, allowed us to infer changes in trophic state and paleosalinities, which were closely related to Holocene sea level variation. Higher trophic states were observed during regressive events, most probably due to increases in runoff and erosion as regression progressed. Four diatom association zones (DAZ) were identified in the sediment core. The basal core section pre-dated the first Holocene marine transgression, contained no diatoms, chrysophyte cysts or non-siliceous microalgae, and showed C/N ratios values higher than 20. Thus, it is likely that the system exhibited terrestrial characteristics. In the second section (6500–2200 years BP, following the first Holocene transgression), there was dominance of marine/brackish diatom species. The lowest trophic states of the core were observed in this section. The third section (2200–1100 years BP), represented the system as it became separate from the Atlantic Ocean, and showed a dominance of brackish/freshwater species and increases in trophic state were observed. In the last section (after 1100 years BP), the system became fully freshwater as no marine or brackish diatom species were found, but a trend to oligotrophication was observed, probably due to nutrient depletion. However, after 1967 AD, eutrophication intensified because of forestry and soil fertilization in the catchment. Pollen association zones (PAZ) allowed us to identify four sections. Below 250 cm (2200 years BP), the core contained no pollen grains as redox potential and pH values were not conducive for pollen preservation. After 2200 years BP (when the system started to separate from the ocean), xerophilic taxa typical of coastal dunes colonized the catchment. Only after 1100 years BP (after fully freshwater conditions established) pollen grains of trees were observed.     

Ollo de Sapo Cambro‐Ordovician volcanics from the Central Iberian basement—A multiphase evolution

The Cambro‐Ordovician rhyodacitic to dacitic volcanics from the Central Iberian basement, currently known as Ollo de Sapo (toads eye), have been reported as a specific group of felsic porphyritic rocks with blue quartz and large phenocrysts of K‐feldspar, in a partly vitreous or fine‐grained matrix. Interpreted to form Cambro‐Ordovician volcanic domes, they are accompanied by tuffs, ignimbrites and products of reworking in a near‐surface environment. The coarse‐ to fine‐grained rocks exhibit rather large K‐feldspar phenocrysts, plagioclase and rounded blue quartz, representing former corroded phenocrysts. Their colouration indicates unmixing of TiO₂ at around 900°C during cooling from relatively high crystallisation temperatures, indicating their origin at hot lower crustal conditions. We propose at least a two‐step evolution (1) starting around 495 Ma in the lower crust of a collapsing cordillera, generating a phenocryst‐rich mush and adiabatic melting of the lower crustal protolith to produce the spectacular Ollo de Sapo porphyrites, before (2) magma ascent and crustal extension leading to a different thermal regime around 483 Ma.     

Mechanical design of the solar telescope GREGOR

The mechanical structure of the GREGOR telescope was installed at the Observatorio del Teide, Tenerife, in 2004. New concepts for mounting and cooling of the 1.5‐meter primary mirror were introduced. GREGOR is an open telescope, therefore the dome is completely open during observations to allow for air flushing through the open, but stiff telescope structure. Backside cooling system of the primary mirror keeps the mirror surface close to ambient temperature to prevent mirror seeing. The large collecting area of the primary mirror results in high energy density at the field stop at the prime focus of the primary which needs to be removed. The optical elements are supported by precision alignment systems and should provide a stable solar image at the optical lab. The coudé train can be evacuated and serves as a natural barrier between the outer environmental conditions and the air‐conditioned optical laboratory with its sensitive scientific instrumentation. The telescope was successfully commissioned and will start its nominal operation during 2013 (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Pre-Variscan geological events in the Austrian part of the Bohemian Massif deduced from U–Pb zircon ages

In an attempt to elucidate the pre-Variscan evolution history of the various geological units in the Austrian part of the Bohemian Massif, we have analysed zircons from 12 rocks (mainly orthogneisses) by means of SHRIMP, conventional multi-grain and single-grain U–Pb isotope-dilution/mass-spectrometry. Two of the orthogneisses studied represent Cadomian metagranitoids that formed at ca. 610 Ma (Spitz gneiss) and ca. 580 Ma (Bittesch gneiss). A metagranite from the Thaya batholith also gave a Cadomian zircon age (567±5 Ma). Traces of Neoproterozoic zircon growth were also identified in several other samples, underlining the great importance of the Cadomian orogeny for the evolution of crust in the southern Bohemian Massif. However, important magmatic events also occurred in the Early Palaeozoic. A sample of the Gföhl gneiss was recognised as a 488±6 Ma-old granite. A tonalite gneiss from the realm of the South Bohemian batholith was dated at 456±3 Ma, and zircon cores in a Moldanubian metagranitic granulite gave similar ages of 440–450 Ma. This Ordovician phase of magmatism in the Moldanubian unit is tentatively interpreted as related to the rifting and drift of South Armorica from the African Gondwana margin. The oldest inherited zircons, in a migmatite from the South Bohemian batholith, yielded an age of ca. 2.6 Ga, and many zircon cores in both Moravian and Moldanubian meta-granitoid rocks gave ages around 2.0 Ga. However, rocks from the Moldanubian unit show a striking lack of zircon ages between 1.8 and 1.0 Ga, reflecting an ancestry from Armorica and the North African part of Gondwana, respectively, whereas the Moravian Bittesch gneiss contains many inherited zircons with Mesoproterozoic and Early Palaeoproterozoic ages of ca. 1.2, 1.5 and 1.65–1.8 Ga, indicating a derivation from the South American part of Gondwana.     

The effects of mining in Northern Romania on the heavy metal distribution in sediments of the rivers Szamos and Tisza (Hungary)

The breach in the dam of a tailing pond in the processing plant of a gold mine in Baia Mare (NW Romania) in January 2000 lead to an ecological disaster in the rivers Szamos and Tisza. It was mainly caused by the released slurries containing cyanides and heavy metals. The investigation of surface sediment samples and depth profiles of the years 2000 and 2001 documented the pollution of the rivers Szamos and Tisza on Hungarian territory. In the Szamos and large areas of the Tisza floodplains a significant enrichment with the heavy metals Pb, Cd, Cu, and Zn is existent. The identification of the binding forms with sequential extraction showed that Cd and Zn exist in an easily available form. Therefore the remobilization is possible and an environmental hazard in the downstream areas must be considered. The anthropogenically caused portions of heavy metal concentrations decrease considerably with increasing distance to the mining region. The comparison of the concentrations of heavy metals in both years shows that the pollution is not only caused by the accident in January 2000. The increase of concentrations is based on the permanent input of pollutants into the rivers. The pollution is mainly caused by the erosion of exposed tailing dumps and the poor maintenance of the treatment plants.