Understanding confluence dynamics in the alluvial Ganga–Ramganga valley, India: An integrated approach using geomorphology and hydrology

Confluence dynamics in the Ganga–Ramganga valley in the western Ganga plains of India has been studied through systematic mapping of channel configuration using multi-date remote sensing images and topographic sheets for a period spanning nearly 100 years (1911–2000). The study has been supplemented with a detailed analysis of the channel morphology, hydrology and sediment transport characteristics of the different rivers. Our study indicates that new confluences have been created during this period and that the confluence points have moved both upstream and downstream on a historical time scale. Apart from major avulsions, other processes that have controlled the confluence movements include river capture, cut-offs and aggradation in the confluence area. River capture occurs through lateral bank erosion and migration, encroachment by the master stream and beheading of smaller rivers resulting in upstream movement of the confluence point. Another process which influences the upstream migration of the confluence is an increase in sinuosity of one of the channels near the confluence and then a cut-off. Aggradation in the confluence area and local avulsions of the primary channel in a multi-channel system seem to be the major process controlling the downstream movement of the confluence point. Analysis of channel morphology, hydrology and sediment budget for the study period supports our interpretations.     

Deep‐water dunes on drowned isolated carbonate terraces (Mozambique Channel,south‐west Indian Ocean)

Subaqueous sand dunes are common bedforms on continental shelves dominated by tidal and geostrophic currents. However, much less is known about sand dunes in deep‐marine settings that are affected by strong bottom currents. In this study, dune fields were identified on drowned isolated carbonate platforms in the Mozambique Channel (south‐west Indian Ocean). The acquired data include multibeam bathymetry, multi‐channel high‐resolution seismic reflection data, sea floor imagery, a sediment sample and current measurements from a moored current meter and hull‐mounted acoustic Doppler current profiler. The dunes are located at water depths ranging from 200 to 600 m on the slope terraces of a modern atoll (Bassas da India Atoll) and within small depressions formed during tectonic deformation of drowned carbonate platforms (Sakalaves Seamount and Jaguar Bank). Dunes are composed of bioclastic medium size sand, and are large to very large, with wavelengths of 40 to 350 m and heights of 0·9 to 9·0 m. Dune migration seems to be unidirectional in each dune field, suggesting a continuous import and export of bioclastic sand, with little sand being recycled. Oceanic currents are very intense in the Mozambique Channel and may be able to erode submerged carbonates, generating carbonate sand at great depths. A mooring located at 463 m water depth on the Hall Bank (30 km west of the Jaguar Bank) showed vigorous bottom currents, with mean speeds of 14 cm sec^?1 and maximum speeds of 57 cm sec^?1, compatible with sand dune formation. The intensity of currents is highly variable and is related to tidal processes (high‐frequency variability) and to anticyclonic eddies near the seamounts (low‐frequency variability). This study contributes to a better understanding of the formation of dunes in deep‐marine settings and provides valuable information about carbonate preservation after drowning, and the impact of bottom currents on sediment distribution and sea floor morphology.     

Diverse mode of phosphatic rocks in the environs of Proterozoic Bijawar and Sonrai basins and its relevance to uranium mineralisation — A case study from central India

The Bundelkhand massif comprising a variety of Archean-Paleoproterozoic granitoids along with low grade and high-grade metamorphites and located in the centre of the Indian Plate, underwent extension during Paleoproterozoic period, resulting in the formation of homotaxial intracratonic Bijawar and Sonrai basins in the south and Gwalior basin in the northern margin. The Bijawar and Sonrai basins are typified by their characteristic sediments and basic volcanic rocks. A feature common to both the basins, is the overwhelming occurrence of phosphatic rocks across stratigraphy and lithotype in the Bijawar basin and its confinement to the basal part of the sedimentary column in Sonrai basin. Most of these rocks are primarily of marine origin, and later subjected to periods of repeated phosphatic redistribution. Multiple episodes of such phosphatisation culminates in the proliferation and enrichment of phosphate in the upper Bijawar rocks of Bijawar basin (phosphatic breccia of Hirapur-Mardeora) and lower Bijawar rocks of Sonrai basin (phosphatic breccia of Lalitpur). Apart from these established phosphatic rocks in both the basins, quartz reefs occurring in the basement as well as the lower Bijawar Malhera Chert Breccia Formation in Bijawar basin at places are endowed with anomalously high phosphate content. The phosphatic component in all the lithotypes is in the form of apatite varying in form from microcrystalline to well formed coarser crystal aggregate comprising cement, veins and botroidal encrustations. Irrespective of its spatial, temporal and paragenetic position, it invariably registers weak to moderate radioactivity, due to the presence of uranium within it, as is evident from microprobe data. Although intra-grain and inter-grain distribution of uranium is found to be random and erratic, in general, it is observed that uranium tends to be enriched in the later generation phosphates, due to secondary process of dissolution and reprecipitation. The present paper, with fresh inputs from petrological, geochemical, minerochemical and isotope data pertaining to apatite from all these diverse units, not only explores the already established association of uranium and phosphate in these basins but also provides new insight to the phosphatic quartz reef within the basement and the phosphatised arenaceous sediments of the lower Bijawar Formation.     

Geological characteristics of 2011 Japan tsunami sediments deposited along the coast of southwestern Mexico

The tsunami of 11th March 2011 was originated at the east coast of Japan and deposited ca.1 cm thick sediment layer along the coast of southwestern Mexico up to a maximum distance of 320 m from the beach. The sedimentological, mineralogical and geochemical characteristics of the sediments deposited during the tsunami (JT) are compared with the pre-tsunami sediments (PRT). JT sediments consist of dominant coarser fractions (>54% of medium to coarse sand), whereas PRT deposits comprise abundant finer fractions (>58% of fine sand). Assemblage of mafic and heavy minerals suggests similar provenance for both. The higher abundance and variation of heavy minerals along with higher concentrations of bromine (Br) and sodium (Na) in the JT deposits reveal the influence of high energy sea waves in transportation of heavy mineral rich coarse sediments onto the coastal lowlands.     

Genetic reinterpretation of crystallographicintergrowths of jacobsite andhausmannite from natural assemblages

Summary Crystallographic intergrowths of jacobsite and hausmannite (vredenburgite) occur in association with braunite in the Precambrian Sausar Group of rocks, India, that were metamorphosed under 600-700°C and P 6 kb. Quartz, hematite, rhodochrosite and a later hausmannite may occasionally occur as minor associates. Detailed characterization of the intergrown phases reveals that hausmannite lamellae, oriented in 4 or 5 crystallographic directions in the jacobsite host, show a wide variation in thickness and tapered intersections at low angles. The lamellae may be locally deformed. Analytical data reveal that the composition of natural hausmannite and jacobsite in the intergrowths cannot be approximated within the system Fe₃O₄ -Mn₃O₄, as has been conventionally done. These really belong to the Fe₂O₃-Mn₃O₄ subsystem. In the two phase intergrowths, hausmannite is depleted and the jacobsite is enriched in Fe in higher grade rocks. Mineral associations and petrographic considerations suggest that the jacobsite-hausmannite intergrowth originated through prograde decarbonation-oxidation reactions of a carbonatic precursor in an unbuffered X CO₂ situation, but f O₂ was held between hematite-magnetite and bixbyite-hausmannite buffers at the ambient physical conditions of metamorphism. Subsequent oxidation yielded a strong oxygenbuffering assemblage jacobsite, hausmannite, braunite, hematite and quartz. This study negates the commonly held idea that hausmannite jacobsite crystallographic intergrowth (vredenburgite) originates through unmixing of a high ([ldvredenburgite) originates through unmixing of a high temperature spinel_ss temperature spinel_ss during cooling.

---

Genetische Reinterpretation der kristallographischen Verwachsungen von Jakobsit und Hausmannit in natürlichen Vorkommen

Zusammenfassung Kristallographische Verwachsungen von Jakobsit und Hausmannit (Vredenburgit) treten in Verbindung mit Braunit in Gesteinen der präkambrischen Sausargruppe in Indien auf. Die Gesteine wurden bei Drucken von ca. 6 kbar und Termperaturen von 600–700°C metamorphosiert. Quarz, Hämatit, Rhodochrosit, und Hausmannit als Spätphase treten gelegentlich als untergeordnete Gemengteile auf. Hausmannit-Lamellen, die in vier oder fünf kristallographischen Richtungen in Jakobsit orientiert sind, haben sehr unterschiedliche Durchmesser und bilden versetzte Zwickel in kleinem Winkel mit dem Jakobsit. Die Lamellen können lokal deformiert sein. Analytische Daten zeigen, daß die Zusammensetzung von natürlichem Hausmannit und Jakobsit in Verwachsungen nicht, wie bisher angenommen, in dem System Fe₃O₄-Mn₃O₄ dargestellt werden kann. Diese Verwachsungen gehören vielmehr in das Fe₂O₃-Mn₃O₄ System. In höher-gradigen metamorphen Gesteinen ist Fe in zwei-phasigen Verwachsungen im Hausmannit ab- und im Jakobsit angereichert. Die Mineralzusammensetzung und petrographische Gesichtspunkte lassen darauf schließen, daß die Jakobsit/Hausmannit Verwachsung durch prograde Dekarbonatisierung/Oxydationsreaktion eines karbonatischen Vorläufers in einem nicht gepufferten X CO₂ Milieu entstanden ist. F O₂ wurde durch Hämatit-Magnetit und Bixbyit-Hausmannit Puffer unter den gegebenen physikalischen Bedingungen der Metamorphose stabil gehalten. Eine nachfolgende Oxydation führte zu einer starken Sauerstoff-puffernden Assoziation von Jakobsit, Hausmannit, Braunit, Hämatit und Quarz. Diese Untersuchungen widerlegen die allgemein verbreitete Ansicht, daß die kristallographische Verwachsung von Hausmannit und Jakobsit (Vredenburgit) durch Entmischung eines Hochtemperatur-Spinells während der Abkühlung entstanden ist.

---

---

With 1 figure     

Uranium geochemistry in groundwater from tertiary sediments

Dissolved U concentrations and activity ratios (ARs) of the U isotopes in the ²³⁸U decay series were measured in ground and surface waters as part of an investigation to delineate the water quality in a proposed uranium mining area of northwest Nebraska. In oxidizing groundwaters from 67 wells completed in the Tertiary sediments, increasing U concentrations in the direction of groundwater flow generally were associated with a maturation of the formation water as evidenced by evolutionary trends in major ion character. The increased U levels probably are associated with leaching as shown by the positive correlation between U concentrations and total dissolved solids (TDS) (r = +0.83). The inverse relationships between TDS and U ARs (r = ?0.73) and U levels and ARs (r = 0.72) indicate that the decay of excess U-234 is related to maturation of the formation water and to sediment leaching along the flowpath. The data are described by a model which incorporates etching, decay and recoil and suggests that aquifer residence time can be estimated from the TDS level.The levels of soluble U in a reducing uraniferous hydrogeologic unit near Crawford, Nebraska are affected by the proximity of the sample collection to ore. In groundwater samples having similar chemistries (Na-SO₄ + Cl type), similar Ehs, and collected from a close-knit pattern, U concentrations ranged from 0.01 to 2,037 μg l^?1 and ARs ranged from 0.75 to 12.6. This high variability in U levels and ARs is indicative of uranium ore in small areal studies where low ARs almost always are associated with high U concentrations.     

Forecasting of cyclone Viyaru and Phailin by NWP-based cyclone prediction system (CPS) of IMD – an evaluation

An objective NWP-based cyclone prediction system (CPS) was implemented for the operational cyclone forecasting work over the Indian seas. The method comprises of five forecast components, namely (a) Cyclone Genesis Potential Parameter (GPP), (b) Multi-Model Ensemble (MME) technique for cyclone track prediction, (c) cyclone intensity prediction, (d) rapid intensification, and (e) predicting decaying intensity after the landfall. GPP is derived based on dynamical and thermodynamical parameters from the model output of IMD operational Global Forecast System. The MME technique for the cyclone track prediction is based on multiple linear regression technique. The predictor selected for the MME are forecast latitude and longitude positions of cyclone at 12-hr intervals up to 120 hours forecasts from five NWP models namely, IMD-GFS, IMD-WRF, NCEP-GFS, UKMO, and JMA. A statistical cyclone intensity prediction (SCIP) model for predicting 12 hourly cyclone intensity (up to 72 hours) is developed applying multiple linear regression technique. Various dynamical and thermodynamical parameters as predictors are derived from the model outputs of IMD operational Global Forecast System and these parameters are also used for the prediction of rapid intensification. For forecast of inland wind after the landfall of a cyclone, an empirical technique is developed. This paper briefly describes the forecast system CPS and evaluates the performance skill for two recent cyclones Viyaru (non-intensifying) and Phailin (rapid intensifying), converse in nature in terms of track and intensity formed over Bay of Bengal in 2013. The evaluation of performance shows that the GPP analysis at early stages of development of a low pressure system indicated the potential of the system for further intensification. The 12-hourly track forecast by MME, intensity forecast by SCIP model and rapid intensification forecasts are found to be consistent and very useful to the operational forecasters. The error statistics of the decay model shows that the model was able to predict the decaying intensity after landfall with reasonable accuracy. The performance statistics demonstrates the potential of the system for improving operational cyclone forecast service over the Indian seas.     

Factors Affecting Efficient Aquifer Restoration at In Situ Uranium Mine Sites

In situ mining of uranium typically requires the injection of a reactive leaching solution (lixiviant) such as sodium carbonate/bicarbonate, ammonium carbonate/bicarbonate, or sulfuric acid, and an oxidant such as hydrogen peroxide or oxygen into an ore-bearing, confined aquifer. It also requires the environmental restoration of the source aquifer. The stratigraphy of sandstone uranium deposits typically consists of interbedded layers of poorly consolidated sands and clays and gravels deposited in fluvial or coastal environments. The parameters that influence the migration of lixiviant during mining and restoration in these environments include induced hydraulic gradients, hydrodynamic dispersion, heterogeneity, anisotropy, physicochemical reactions, leakage into and/or through confining layers, and convergence of flow lines due to partial well penetration.
The effectiveness of the various methods of aquifer restoration is sit -specific and is dependent upon the site hydrogeology and hydrogeochemistry, and the chemistry of the lixiviant. Each method of aquifer restoration has advantages and disadvantages. Selection of the most effective and economically feasible method requires detailed knowledge of the site-specific hydrogeologic conditions.     

Evaluation of precipitation prediction skill of IMD operational NWP system over Indian monsoon region

Summary The study provides a concise and synthesized documentation of the current level of skill of the operational NWP model of India Meteorological Department based on daily 24 hours forecast run of the model during two normal monsoon years 2001 and 2003 making detailed inter-comparison with daily rainfall analysis from the use of high dense land rain gauge observations. The study shows that the model, in general, is able to capture three regions of climatologically heavy rainfall domains along Western Ghats, Northeast India and over east central India, over the domain of monsoon trough. However, the accuracy in prediction of location and magnitude of rainfall fluctuates considerably. The inter-comparison reveals that performance of the model rainfall forecast deteriorated in 2003 when rainfall over most parts of the region was significantly under-predicted. These features are also reflected in the error statistics. The study suggests that there is a need to maximize the data ingest in the model with a better data assimilation scheme to improve the rainfall forecast skill.     

Geometry and evolution of superposed folding in the Zawar lead-zinc mineralised belt,Rajasthan

The lead-zinc bearing Proterozoic rocks of Zawar, Rajasthan, show classic development of small-scale structures resulting from superposed folding and ductile shearing. The most penetrative deformation structure noted in the rocks is a schistosity (S ₁) axial planar to a phase of isoclinal folding (F ₁). The lineations which parallel the hinges ofF ₁ folds are deformed by a set of folds (F ₂) having vertical or very steep axial planes. At many places a crenulation cleavage (S ₂) has developed subparallel to the axial planes ofF ₂ folds, particularly in the psammopelitic rocks. The plunge and trend ofF ₂ folds vary widely over the area. Deformation ofF ₂ folds into hook-shaped geometry and development of another set of axial planar crenulation cleavage are the main imprints of the third generation folds (F ₃) in the region. In addition to these, there are at least two other sets of cleavage planes with corresponding folds in small scales. More common among these is a set of recumbent and reclined folds (F ₄), developed on steeply dipping early-formed planes. Kink bands and associated sharp-hinged folds represent the other set (F ₅). Two major refolded folds are recognizable in the map pattern of the Zawar mineralised belt. The larger of the two, the Main Zawar Fold (MZF), shows a broad hook-shaped geometry. The other large-scale structure is the Zawarmala fold, lying south-west of the MZF. Both the major structures show truncation of lithological units along their respective east ‘limbs’, and extreme variation in the width of formations. The MZF is primarily the result of superimposition ofF ₃ onF ₂.F ₁ folds are relatively smaller in scale and are recognizable in the quartzite unit which responded to deformation mainly by buckle shortening. Large-scale pinching-and-swelling that appears in the outcrop pattern seems to be a pre-F₂ feature. The structural evolutionary model worked out to explain the chronology of the deformational features and the large-scale out-crop pattern envisages extreme east-west shortening following formation ofF ₁ structures, resulting in the formation of tight and isoclinal antiforms (F ₂) with pinched-in synforms in between. These latter zones evolved into a number of ductile shear zones (DSZs). The east-west refolding of the large-scaleF ₂ isoclinal antiforms seems to be the consequence of a continuous deformation and resultant migration of folds along the DSZs. The main shear zone which wraps the Zawar folds followed a curved path. Because of the penetrative nature of theF ₂ movement, the early lineations which were at high angles to the later ones (as is evident in the west of Zawarmala), became subparallel to the trend ofF ₂ folding over a large part of the area. Further, the virtually coaxial nature ofF ₂ andF ₃ folds and the refolding ofF ₃ folds by a new set of N-S folds is an indication of continuous progressive deformation.