Assessment of hydro power potential of Swat,Kohistan Himalayas: A solution for energy shortfall in region

Pakistan is facing acute power dearth these days due to which people are suffering from privation and their economic condition is deflating. Expensive imported fossil fuel for thermal power generation is pressing them hard and exacerbating the situation. The total power produced in the country by all means is less by 4000 MW than the requirement of Pakistan. So this is the prime time to think about exploring aboriginal and renewable power resources. This article converses about hydro power resources of Swat, North Pakistan, one of the most promising areas in hydro power production. The area drained by the Swat River and its tributary net work is a part of Kohistan Himalayas and has a potential of more than 1000 MW that can contribute 25% to the total energy shortfall in the country and the same is 150% more than the shortfall experienced in the province of Khyber Pakhtunkhwa that hosts Swat Valley. Due to great relief difference acquired within a small stretch, the perennial Swat River and its tributaries become pertinent for power production as high head projects and also gain importance in irrigation as well.     

Sedimentological and petrochemical studies of Jurassic clastic rocks,Habo Dome Basin,Kachchh Mainland,Northwest India: Implications for depositional environment,provenance, and tectonic setting

Mesozoic rocks are extensively and excellently preserved in the western Indian shield in several basins. The Kachchh Mainland Basin (KMB), comprising six small sub‐basins, is the main repository of these sediments. Habo Dome Basin, situated in the easternmost part of KMB and largest among the six basins, hosts clastics of the Chari Formation of Jurassic age. The fluctuating transgressive–regressive facies cycle, developed during the Callovian and Late Early Oxfordian in the Habo Dome Basin, was mainly controlled by local tectonics and not by global eustatic fluctuations. Near magmatic relationships are displayed by various elements of the clastic rocks of Habo Dome Basin. Two litho‐chemical groups have been identified in Habo Dome Basin, which are cyclically repeated over entire lithostratigraphic sequence, indicating alternate pulses of sediment inputs from two different sources under palpitating tectonic conditions. Provenance indicator elements and their ratios coupled with source modeling indicate predominantly felsic source with basic and alkalic components. Integrated analysis of petrograhic and geochemical characteristics suggests two source terranes for these rocks: a granitoid source with significant basic volcanics (Banded Gneissic Complex) and a granite–gneissic source with minor alkaline volcanics (Nagarparkar Massif) lying to northeast and NNW respectively. The petrochemistry of Habo Dome clastics suggests their deposition in a fault controlled sink which was influenced by sea level changes. Drifting of the Indian plate resulted in the opening of series of rifted basins in the Kachchh Mainland during Late Triassic/Early Jurassic, which were closed later during collision of Indian plate with Eurasia at early Eocene. The Habo Dome Basin which opened up as a half graben in response to the initial stress regime, remained tectonically unstable until the cessation of pre and post collisional stress regimes.     

Dissolution of illite in saline-acidic solutions at 25 °C

The dissolution rate of illite, a common clay mineral in Australian soils, was studied in saline-acidic solutions under far from equilibrium conditions. The clay fraction of Na-saturated Silver Hill illite (K_1.38Na_0.05)(Al_2.87Mg_0.46Fe³⁺_0.39Fe²⁺_0.28Ti_0.07)[Si_7.02Al_0.98]O₂₀(OH)₄ was used for this study. The dissolution rates were measured using flow-through reactors at 25 ± 1 °C, solution pH range of 1.0-4.25 (H₂SO₄) and at two ionic strengths (0.01 and 0.25 M) maintained using NaCl solution. Illite dissolution rates were calculated from the steady state release rates of Al and Si. The dissolution stoichiometry was determined from Al/Si, K/Si, Mg/Si and Fe/Si ratios. The release rates of cations were highly incongruent during the initial stage of experiments, with a preferential release of Al and K over Si in majority of the experiments. An Al/Si ratio >1 was observed at pH 2 and 3 while a ratio close to the stoichiometric composition was observed at pH 1 and 4 at the higher ionic strength. A relatively higher K⁺ release rate was observed at I = 0.25 in 2-4 pH range than at I = 0.01, possibly due to ion exchange reaction between Na⁺ from the solution and K⁺ from interlayer sites of illite. The steady state release rates of K, Fe and Mg were higher than Si over the entire pH range investigated in the study. From the point of view of the dominant structural cations (Si and Al), stoichiometric dissolution of illite occurred at pH 1-4 in the higher ionic strength experiments and at pH ?3 for the lower ionic strength experiments. The experiment at pH 4.25 and at the lower ionic strength exhibited lower R_Al (dissolution rate calculated from steady state Al release) than R_Si (dissolution rate calculated from steady state Si release), possibly due to the adsorption of dissolved Al as the output solutions were undersaturated with respect to gibbsite. The dissolution of illite appears to proceed with the removal of interlayer K followed by the dissolution of octahedral cations (Fe, Mg and Al), the dissolution of Si is the limiting step in the illite dissolution process. A dissolution rate law showing the dependence of illite dissolution rate on proton concentration in the acid-sulfate solutions was derived from the steady state dissolution rates and can be used in predicting the impact of illite dissolution in saline acid-sulfate environments. The fractional reaction orders of 0.32 (I = 0.25) and 0.36 (I = 0.01) obtained in the study for illite dissolution are similar to the values reported for smectite. The dissolution rate of illite is mainly controlled by solution pH and no effect of ionic strength was observed on the dissolution rates.     

Artificial neural network application to estimate kinematic soil pile interaction response parameters

Six artificial neural network (ANN) models are developed to predict various response parameters of kinematic soil pile interaction. These responses include (1) kinematic response factors for free and fixed head piles in homogenous soil layer to derive foundation input motion (2) normalized bending moment at fixed head of pile in homogenous soil layer (3) normalized kinematic pile moment at the interface of two soil layers of sharply different soil stiffnesses. These ANN models represent simple solutions that can be implemented in a simple calculator capable of matrix operation and bypass the site response analysis and the complex wave diffraction analysis. The data required for ANN training is generated using beam on dynamic Winkler formulation (BDWF). Fifty percent of the data is used to train the ANN models while remaining 50% is used to test the ANN models. The trained ANN models show good agreement with BDWF results.     

Impact of a new invasive ctenophore (Mnemiopsis leidyi) on the zooplankton community of the Southern Caspian sea

The invasive ctenophore Mnemiopsis leidyi (Agassiz), which was transported from the Black Sea into the Caspian Sea at the end of the 1990s, has negatively affected the ecosystem of the Caspian Sea. Zooplankton abundance, biomass and species composition were evaluated on the Iranian coast of the Caspian Sea during 2001–2006. A total of 18 merozooplankton (13 species composed of larvae of benthic animals) and holozooplankton (four Copepoda and one Cladocera) species were identified. The total number of zooplankton species found here was 50% less than in a previous investigation performed in the same region in 1996 before the introduction of Mnemiopsis leidyi into the Caspian Sea. Cladocera species seemed to be highly affected by the invasion of Mnemiopsis leidyi; only one species, Podon polyphemoides, remained in the study area, whereas 24 Cladocera species were found in the study carried out in 1996. Whereas among the Copepoda Eurytemora minor, Eurytemora grimmi, Calanipeda aquae dulcis and Acartia tonsa that were abundant before the Mnemiopsis leidyi invasion, only A. tonsa (copepodites and adults) dominated the inshore and offshore waters after the invasion. The maximum in zooplankton abundance (22,088 ± 24,840 ind·m^?3) and biomass (64.1 ± 56.8 mg·m^?3) were recorded in December 2001 and August 2004, respectively. The annual mean zooplankton abundance during 2001–2006 was in the range of 3361–8940 ind·m^?3; this was two‐ to five‐fold less than the zooplankton abundance in 1996. During 2001–2006, the highest abundance and biomass of Mnemiopsis leidyi were observed during summer‐autumn months coincident with warm temperatures and generally when the abundance of other zooplankton organisms was low.     

IRS-LISS-III and PAN data analysis for landslide susceptibility mapping using heuristic approach in active tectonic region of Himalaya

Structurally disturbed zones of Himalaya are among the worst landslide affected regions in the world. Although landslides are induced/triggered either by torrential rain during monsoon or by seismic activity in the region, the inherent terrain conditions characterize the prevailing basic conditions susceptible to landslides. Using remotely sensed data and Geographic Information System (GIS), geological and terrain factors can be integrated for preparation of factor maps and demarcation of areas susceptible to landslides. Moderate to high resolution data products available from Indian Remote Sensing satellites have been utilized for deriving geological and terrain factor maps, which were integrated using knowledge driven heuristic approach in Integrated Land and Water Information System (ILWIS) GIS. The resultant map shows division of the area into landslide susceptibility classes ranked in terms of hazard potential in one of the structurally disturbed zones in western Himalaya around Rishikesh.