3D near-surface soil response from H/V ambient-noise ratios

The applicability of the horizontal-to-vertical (H/V) ambient-noise spectral ratio for characterizing earthquake site effects caused by near-surface topography and velocity structures was evaluated at sites underlain by thick (i.e. >100 m) sediment deposits near the southern-end of the New Madrid seismic zone in the central United States. Three-component ambient-noise and velocity models derived from seismic (shear-wave) refraction/reflection surveys showed that a relatively horizontal, sharp shear-wave velocity interface in the soil column resulted in an H/V spectral ratio with a single well-defined peak. Observations at sites with more than one sharp shear-wave velocity contrast and horizontally arranged soil layers resulted in at least two well-defined H/V spectral ratio peaks. Furthermore, at sites where there were sharp shear-wave velocity contrasts in nonhorizontal, near-surface soil layers, the H/V spectra exhibited a broad-bandwidth, relatively low-amplitude signal instead of a single well-defined peak.     

Bandpass calibration of a wideband spectrometer using coherent pulse injection

We present a relatively simple time domain method for determining the bandpass response of a system by injecting a nanosecond pulse and capturing the system voltage output. A pulse of sub-nanosecond duration contains all frequency components with nearly constant amplitude up to 1 GHz. Hence, this method can accurately determine the system bandpass response to a broadband signal. In a novel variation on this impulse response method, a train of pulses is coherently accumulated providing precision calibration with a simple system. The basic concept is demonstrated using a pulse generator-accumulator setup realised in a Bedlam board which is a high speed digital signal processing unit. The same system was used at the Parkes radio telescope between 2–13 October 2013 and we demonstrate its powerful diagnostic capability. We also present some initial test data from this experiment.     

Open source, spatial analysis, and activity-travel behaviour research: capabilities of the aspace package

This paper reports on recent experience with the development of aspace, an Open Source (OS) library for the geographic visualization and analysis of activity-travel behaviour. The paper begins with an overview of recent progress with respect to the convergence of Open Source technology, spatial analysis, and travel behaviour research. The remainder of the paper focuses on aspace; a collection of functions that, when combined with data describing the geographical location of daily activities, can be used to visualize and describe spatial properties of individual and household activity spaces. These properties include: size, orientation, shape, and the geographical dispersion of activity locations contained within the activity space. Several planar geometries are used to transform measurable spatial properties into intuitive objects for visualizing spatial patterns of activity participation. Experiments are conducted, using data from the first wave of the 2003 Toronto Travel Activity Panel Survey, to demonstrate the potential application of aspace for basic and applied policy-based research into activity-travel behaviour. The toolkit is distributed as a downloadable ‘package’ from the Open Source R Project for Statistical Computing.      

Intrusion versus inversion—a 3D density model of the southern rim of the Northwest German Basin

An unsolved problem of regional importance for both the evolution and structure of the Northwest German Basin is the existence or non-existence of the so-called Bramsche Massif. Explaining the nature of this massif and the cause of a related strong, positive Bouguer anomaly (Bramsche Anomaly) is critical. In the study described here, we tested an existing “intrusion model” against a newer “inversion model” in the southern Northwest German Basin. In the intrusion model, the strongly-positive Bouguer anomaly represents the gravity effect of an intrusion at depths between 6 and 10 km. More recent interpretations invoke tectonic inversion rather than intrusion to explain increased burial and the low level of hydrocarbon maturity found in boreholes. We tested these different interpretations by constructing 3D forward density models to 15 km depth. The intrusion model was updated and adjusted to incorporate recent data and we also modelled pre-Zechstein structures using different scenarios. The final model has a very good fit between measured and modelled gravity fields. Based on currently available seismic and structural models, as well as borehole density measurements, we show that the positive Bouguer anomaly cannot be modeled without a high-density, intrusive-like body at depth. However, further in-sight into the crustal structures of the Bramsche region requires more detailed investigations. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Geomorphological evidence for upslope canyon-forming processes on the northern KwaZulu-Natal shelf,SW Indian Ocean,South Africa

A geomorphological and statistical analysis of slope canyons from the northern KwaZulu-Natal continental margin is documented and compared with submarine canyons from the Atlantic margin of the USA. The northern KwaZulu-Natal margin is characterized by increasing upslope relief, concave slope-gradient profiles and features related to upslope growth of the canyon forms. Discounting slope-gradient profile, this morphology is strikingly similar to canyon systems of the New Jersey slope. Several phases of canyon incision indicate that downslope erosion is also an important factor in the evolution of the northern KwaZulu-Natal canyon systems. Despite the strong similarities between the northern KwaZulu-Natal and New Jersey slope-canyon systems, key differences are evident: (1) the concavity of the northern KwaZulu-Natal slope, contrasting with the ∼linear New Jersey slope; (2) the relative isolation of the northern KwaZulu-Natal canyons, rather than the dense clustering of the New Jersey canyons; and (3) the absence of strongly shelf-breaching canyons along the northern KwaZulu-Natal margin. In comparison with the New Jersey margin, we surmise a more youthful stage of canyon evolution, a result of either the canyons themselves being younger or the formative processes being less active. Less complicated patterns of erosion resulting from reduced sediment availability have developed in northern KwaZulu-Natal. The reduction in slope concavity on the New Jersey margin may be the result of grading of the upper slope by intensive headward erosion, a process more subdued—or less evident—on the KwaZulu-Natal margin.     

Treatment of Malting Wastewater in a Granular Sludge Sequencing Batch Reactor (SBR)

Aerobic granular sludge was successfully cultivated in a sequencing batch reactor (SBR) treating wastewater from the malting process with a high content of particulate organic matter. At an organic loading rate of 3.2 kg/(m³ d) COD_total and an influent particle concentration of 0.95 g/L MLSS an average removal of 50% in COD_total and 80% in COD_dissolved could be achieved. A comparison of granular and flocculent sludge grown under the same operating conditions showed no significant difference in removal efficiency although granules exhibited a higher metabolic activity in terms of specific oxygen uptake rate (r_{O2, X}). Two distinct mechanisms of particle removal were observed for granular sludge: during initial granule formation, particles were incorporated into the biofilm matrix. For mature granules, a high level of protozoa growth on the granule surface accounted for the ability to remove particulate COD. Combined evaluation of the development in MLSS content and sludge bed settling rate (i.e., mean derivative of the normalized sludge volume) was found to be an adequate method for monitoring the characteristic settling properties of a granulizing sludge bed. By means of this method, a distinct substrate gradient out of several operating conditions was concluded to have the biggest impact on the formation of aerobic granular sludge.     

Palaeoleptus burmanicus n. gen., n. sp., an Early Cretaceous shore bug (Hemiptera: Palaeoleptidae n. fam.) in Burmese amber

Palaeoleptus burmanicus gen. et sp. nov. (Hemiptera: Leptopodomorpha: Palaeoleptidae fam. nov.) is described from Early Cretaceous Burmese amber. The fossil is characterized by nearly completely coreaceous wings with only a small membranous area at the distal tip, and a unique wing venation consisting of eight closed cells, including four obliquely orientated toward the embolar wing margin and two large vertically-positioned cells extending nearly to the apical wing margin. Additional characters are large, compound eyes, three pairs of cephalic trichobothria, four antennal segments all similar in texture, spines on the profemur, ocelli positioned on a tubercle and a rostrum extending to the mesocoxae, with the second segment bearing four pairs of spines. The female fossil contains an asymmetrical subgenital plate orientated toward the left side of the body, indicating a side-by-side mating behavior as occurs in extant Leptopodomorpha.     

Recent explosive eruptions and volcano hazards at Soputan volcano—a basalt stratovolcano in north Sulawesi, Indonesia

Soputan is a high-alumina basalt stratovolcano located in the active North Sulawesi-Sangihe Islands magmatic arc. Although immediately adjacent to the still geothermally active Quaternary Tondono Caldera, Soputan’s magmas are geochemically distinct from those of the caldera and from other magmas in the arc. Unusual for a basalt volcano, Soputan produces summit lava domes and explosive eruptions with high-altitude ash plumes and pyroclastic flows—eight explosive eruptions during the period 2003–2011. Our field observations, remote sensing, gas emission, seismic, and petrologic analyses indicate that Soputan is an open-vent-type volcano that taps basalt magma derived from the arc-mantle wedge, accumulated and fractionated in a deep-crustal reservoir and transported slowly or staged at shallow levels prior to eruption. A combination of high phenocryst content, extensive microlite crystallization and separation of a gas phase at shallow levels results in a highly viscous basalt magma and explosive eruptive style. The open-vent structure and frequent eruptions indicate that Soputan will likely erupt again in the next decade, perhaps repeatedly. Explosive eruptions in the Volcano Explosivity Index (VEI) 2–3 range and lava dome growth are most probable, with a small chance of larger VEI 4 eruptions. A rapid ramp up in seismicity preceding the recent eruptions suggests that future eruptions may have no more than a few days of seismic warning. Risk to population in the region is currently greatest for villages located on the southern and western flanks of the volcano where flow deposits are directed by topography. In addition, Soputan’s explosive eruptions produce high-altitude ash clouds that pose a risk to air traffic in the region.     

The Port Mouton Shear Zone: intersection of a regional fault with a crystallizing granitoid pluton

The peraluminous tonalite–monzogranite Port Mouton Pluton is a petrological, geochemical, structural, and geochronological anomaly among the many Late Devonian granitoid intrusions of the Meguma Lithotectonic Zone of southern Nova Scotia. The most remarkable structural feature of this pluton is a 4-km-wide zone of strongly foliated (040/subvertical) monzogranites culminating in a narrow (10–30 m), straight, zone of compositionally banded rocks that extends for at least 3 km along strike. The banded monzogranites consist of alternating melanocratic and leucocratic compositions that are complementary to the overall composition of that part of the pluton, suggesting an origin by mineral–melt and mineral–mineral sorting. Biotite and feldspar are strongly foliated in the plane of the compositional bands. These compositional variations and foliations originated by a process of segregation flow during shearing of the main magma with a crystallinity of 55–75%. Subsequent minor brittle fracturing of feldspars, twinning of microcline, development of blocky sub-grains in quartz, and kinking of micas demonstrate overprinting by a high-temperature deformation straddling the monzogranite solidus. Small folds and late sigmoidal dykes indicate dextral movement on the shear zone. This Port Mouton Shear Zone (PMSZ) is approximately co-linear with the only outcrops of Late Devonian mafic intrusions in the area, two of which are syn-plutonic with well-developed mingling textures in the marginal tonalite of the Port Mouton Pluton. Also closely co-linear with the mafic intrusions are a granitoid dyke that extends well beyond the outer contact of the Port Mouton Pluton, a swarm of large aligned angular xenolithic slabs, a zone of thin wispy schlieren banding, a large Be-bearing pegmatite, and a breccia pipe with abundant garnetiferous metapelitic xenoliths. In various ways, the shear zone may control all of these features. The Port Mouton Shear Zone is parallel to many other NE-trending faults and shear zones in the northern Appalachians, probably related to the docking of the Meguma Zone along the Cobequid–Chedabucto Fault system.