Physics of basic motions in asymmetric continuum

We consider the advantages of a formalism based on concept of the asymmetric continuum and we present some equivalence theorems relating it to the asymmetric elasticity and to micropolar and micromorphic theories as founded by Nowacki, Cosserats and Eringen. We consider the basic processes in an asymmetric continuum which could be reduced to the point basic motions/deformations. The co-action of spin and shear motions is assumed to play the main role in fracturing process, while the constitutive relation between the antisymmetric stresses and rotations replaces the friction constitutive law.     

Burying receivers for improved time‐lapse seismic repeatability: CO2CRC Otway field experiment

4D seismic is widely used to remotely monitor fluid movement in subsurface reservoirs. This technique is especially effective offshore where high survey repeatability can be achieved. It comes as no surprise that the first 4D seismic that successfully monitored the CO₂ sequestration process was recorded offshore in the Sleipner field, North Sea. In the case of land projects, poor repeatability of the land seismic data due to low S/N ratio often obscures the time‐lapse seismic signal. Hence for a successful on shore monitoring program improving seismic repeatability is essential. Stage 2 of the CO2CRC Otway project involves an injection of a small amount (around 15,000 tonnes) of CO₂/CH₄ gas mixture into a saline aquifer at a depth of approximately 1.5 km. Previous studies at this site showed that seismic repeatability is relatively low due to variations in weather conditions, near surface geology and farming activities. In order to improve time‐lapse seismic monitoring capabilities, a permanent receiver array can be utilised to improve signal to noise ratio and hence repeatability. A small‐scale trial of such an array was conducted at the Otway site in June 2012. A set of 25 geophones was installed in 3 m deep boreholes in parallel to the same number of surface geophones. In addition, four geophones were placed into boreholes of 1–12 m depth. In order to assess the gain in the signal‐to‐noise ratio and repeatability, both active and passive seismic surveys were carried out. The surveys were conducted in relatively poor weather conditions, with rain, strong wind and thunderstorms. With such an amplified background noise level, we found that the noise level for buried geophones is on average 20 dB lower compared to the surface geophones. The levels of repeatability for borehole geophones estimated around direct wave, reflected wave and ground roll are twice as high as for the surface geophones. Both borehole and surface geophones produce the best repeatability in the 30–90 Hz frequency range. The influence of burying depth on S/N ratio and repeatability shows that significant improvement in repeatability can be reached at a depth of 3 m. The level of repeatability remains relatively constant between 3 and 12 m depths.     

Intermittent generation of mafic enclaves in the 1991–1995 dacite of Unzen Volcano recorded in mineral chemistry

Mafic enclaves in the 1991–1995 dacite of Unzen volcano show chemical and textural variability, such as bulk SiO₂ contents ranging from 52 to 62 wt% and fine- to coarse-grained microlite textures. In this paper, we investigated the mineral chemistry of plagioclase and hornblende microlites and distinguished three enclave types. Type-I mafic enclaves contain high-Mg plagioclase and low-Cl hornblende as microlites, whereas type-III enclaves include low-Mg plagioclase and high-Cl hornblende. Type-II enclaves have an intermediate mineral chemistry. Type-I mafic enclaves tend to show a finer-grained matrix, have slightly higher bulk rock SiO₂ contents (56–60 wt%) when compared with the type-III mafic enclaves (SiO₂?=?53–59 wt%), but the overall bulk enclave compositions are within the trend of the basalt–dacite eruptive products of Quaternary monogenetic volcanoes around Unzen volcano. The origin of the variation of mineral chemistry in mafic enclaves is interpreted to reflect different degree of diffusion-controlled re-equilibration of minerals in a low-temperature mushy dacitic magma reservoir. Mafic enclaves with a long residence time in the dacitic magma reservoir, whose constituent minerals were annealed at low-temperature to be in equililbrium with the rhyolitic melt, represent type-III enclaves. In contrast, type-I mafic enclaves result from recent mafic injections with a mineral assemblage that still retains the high-temperature mineral chemistry. Taking temperature, Ca/(Ca?+?Na) ratio of plagioclase, and water activity of the hydrous Unzen magma into account, the Mg contents of plagioclase indicate that plagioclase microlites in type-III enclaves initially crystallized at high temperature and were subsequently re-equilibrated at low-temperature conditions. Compositional profiles of Mg in plagioclase suggest that older mafic enclaves (Type-III) had a residence time of ~100 years at 800 °C in a stagnant magma reservoir before their incorporation into the mixed dacite of the 1991–1995 Unzen eruption. Presence of different types of mafic enclaves suggests that the 1991–1995 dacite of Unzen volcano tapped mushy magma reservoir intermittently replenished by high-temperature mafic magmas.     

Intrusion versus inversion—a 3D density model of the southern rim of the Northwest German Basin

An unsolved problem of regional importance for both the evolution and structure of the Northwest German Basin is the existence or non-existence of the so-called Bramsche Massif. Explaining the nature of this massif and the cause of a related strong, positive Bouguer anomaly (Bramsche Anomaly) is critical. In the study described here, we tested an existing “intrusion model” against a newer “inversion model” in the southern Northwest German Basin. In the intrusion model, the strongly-positive Bouguer anomaly represents the gravity effect of an intrusion at depths between 6 and 10 km. More recent interpretations invoke tectonic inversion rather than intrusion to explain increased burial and the low level of hydrocarbon maturity found in boreholes. We tested these different interpretations by constructing 3D forward density models to 15 km depth. The intrusion model was updated and adjusted to incorporate recent data and we also modelled pre-Zechstein structures using different scenarios. The final model has a very good fit between measured and modelled gravity fields. Based on currently available seismic and structural models, as well as borehole density measurements, we show that the positive Bouguer anomaly cannot be modeled without a high-density, intrusive-like body at depth. However, further in-sight into the crustal structures of the Bramsche region requires more detailed investigations. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Chemical and biological features of the saline Lake Krasnovishnevoye (Baraba,Russia) in comparison with Lake Malinovoe (Kulunda,Russia): a reconnaissance study

The Baraba and Kulunda steppes are located in southwestern Siberia in an area with an arid continental climate. This paper presents results of the first study of the hypersaline Lake Krasnovishnevoye(Baraba steppe, TDS(total dissolved solids)=297 g/L, pH 7.88). The major chemical, mineralogical and biological features of the lake were studied and compared to those of Lake Malinovoe, a typical saline neutral lake of Kulunda steppe(TDS=396 g/L, pH 7.63). The phytoplankton composition and the culturable diversity of anoxygenic phototrophic bacteria from Lake Krasnovishnevoye correspond to the ones in the Kulunda lakes. Nevertheless, the peculiarities of water composition and regime of Lake Krasnovishnevoye reduce the biodiversity to prokaryotes and unicellular algae.     

Tectonic Subsidence of California Estuaries Increases Forecasts of Relative Sea-Level Rise

Even along the generally uplifting coast of the Pacific US, local geologic structures can cause subsidence. In this study, we quantify Holocene-averaged subsidence rates in four estuaries (Carpinteria Slough, Goleta Slough, Campus Lagoon, and Morro Bay) along the southern and central California coast by comparing radiocarbon-dated estuarine material to a regional sea-level curve. Holocene-averaged rates of vertical motion range from subsidence of 1.4?±?2.4, 1.2±0.4, and 0.4?±?0.3 mm/year in Morro Bay, Carpinteria Slough, and Goleta Slough, respectively, to possible uplift in Campus Lagoon (?0.1?±?0.9 mm/year). The calculated rates of subsidence are of the same magnitude as rates of relative sea-level rise experienced over the late Holocene and effectively double the ongoing rates of relative sea-level rise experienced over the last five decades on other parts of the coast. The difference in rates of vertical motion among these four estuaries is attributed to their geological settings. Estuaries developed in subsiding geological structures such as synclines and fault-bounded basins are subsiding at much higher rates than those developed within flooded river valleys incised into marine terraces. Restoration projects accounting for future sea-level rise must consider the geologic setting of the estuaries and, if applicable, include subsidence in future sea-level rise scenarios, even along the tectonically uplifting US Pacific Coast.     

Rotation and strain seismology

Asymmetric continuum theory points to the equal roles of the rotation motions and those related directly to shear or confining strains. The strain motions could be quite independent or mutually related with the eventual phase shifts, while the displacements have only a mathematical sense; a real displacement may appear along the fracture slip only. Formally, any deformation could be presented as related to the displacements; however, its origin in a fracture source should be considered either as belonging to an individual process or to complex correlated events; in these cases, the confining, shear and rotation strains can be related mathematically to the different displacement fields. Some of these related deformations could be emitted from a source with a phase shift, while the observed displacements (deduced from records) result as a sum of these independent displacements. An important influence on a source process and on the premonitory micro-events has the material defects, their distribution, and mobility. The defect arrays lead to a concentration of stresses and their local reorganization. Thus, in this paper, we consider the induced stresses and strains related to defect content and to its modification and redistribution. Moreover, an important role in understanding the complex correlated events in a source plays the release?Crebound mechanism. The release?Crebound mechanism in an earthquake source processes leads to a possible direct or phase-shifted correlations between the emitted motions; in this aspect, a propagation of the coupled strain and rotation waves is discussed. In particular, we consider the point fracture events as related either to a confining load or/and to the shear and rotation processes; we discuss the related effects and their meaning when discussing the fault plane mechanism and emitted waves. In some important seismic regions, we have the recording system which permits to record the strains and rotations. However, we should point that the wordwide seismological network is not adequate to record the complex strain deformations released in the fracture processes and remains quite insufficient to understand the global stress changes and related strain waves of a very low period. Consideration on a recording mechanism of the long displacement waves indicates the insufficiencies of the present global recording system and points that recording of the global strain and rotation waves is an important and urgent task.     

Water source characterization through spatiotemporal patterns of major,minor and trace element stream concentrations in a complex,mesoscale German catchment

The link between spatiotemporal patterns of stream water chemistry and catchment characteristics for the mesoscale Dill catchment (692 km²) in Germany is explored to assess the catchment scale controls on water quality and to characterize water sources. In order to record the spatiotemporal pattern, ‘snapshot sampling’ was applied during low, mean and high flow, including 73 nested sites throughout the catchment. Water samples were analysed for the elements Li, B, Na, Mg, Al, K, Ca, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Rb, Sr, Mo, Ba, Pb and U using inductively‐coupled‐plasma mass spectrometry, and for electric conductivity and pH. Principle component analysis and hierarchical cluster analysis were used to find typical element associations and to group water samples according to their hydrochemical fingerprints. This revealed regional hydrochemical patterns of water quality which were subsequently related to catchment attributes to draw conclusions about the controls on stream chemistry. It was found that various lithologic signals and anthropogenic point source inputs controlled the base flow hydrochemistry. During increased flows, stream waters were diluted causing additional hydrochemical variability in response to heterogeneous precipitation inputs and differences in aquifer storage capacities. The hydrochemical patterns further displayed in‐stream mixing of waters. This implied, that stream waters could be apportioned to the identified water sources throughout the catchment. The basin‐wide hydrochemical variability has the potential to outrange the tracer signatures typically inferred in studies at the hillslope scale and is able to strongly influence the complexity of the catchment output. Both have to be considered for further catchment scale tracer and modelling work. Despite the likelihood of non‐conservative behaviour, the minor and trace elements enhanced the rather qualitative discrimination of the various groundwater types, as the major cations were strongly masked by point source inputs. Copyright © 2007 John Wiley & Sons, Ltd.     

‘Similar’ coordinate systems and the Roche geometry: application

A new equivalence relation, named relation of ‘similarity’ is defined and applied in the restricted three-body problem. Using this relation, a new class of trajectories (named ‘similar’ trajectories) are obtained; they have the theoretical role to give us new details in the restricted three-body problem. The ‘similar’ coordinate systems allow us in addition to obtain a unitary and an elegant demonstration of some analytical relations in the Roche geometry. As an example, some analytical relations published by Seidov (in Astrophys. J. 603:283, 2004) are demonstrated.     

Tertiary alkaline Roztoky Intrusive Complex, České středohoří Mts., Czech Republic: petrogenetic characteristics

The ?eské st?edoho?í Mts. is the dominant volcanic center of the Oh?e (Eger) rift zone. It hosts the Roztoky Intrusive Complex (RIC), which is made up of a caldera vent and intrusions of 33–28-Ma-old hypabyssal bodies of essexite–monzodiorite–sodalite syenite series accompanied by a radially oriented 30–25-Ma-old dike swarm comprising about 1,000 dikes. The hypabyssal rocks are mildly alkaline mostly foid-bearing types of mafic to intermediate compositions. The dike swarm consists of chemically mildly alkaline and rare strongly alkaline rocks (tinguaites). The geochemical signatures of the mildly alkaline hypabyssal and associated dike rocks of the RIC are consistent with HIMU mantle sources and contributions from lithospheric mantle. The compositional variations of essexite and monzodiorite can be best explained by fractional crystallization of parent magma without significant contributions of crustal material. On the other hand, the composition of monzosyenite, leuco-monzodiorite and sodalite syenite reflects fractional crystallization coupled with variable degrees of crustal assimilation. It is suggested that the parent magmas in the Oh?e rift were produced by an adiabatic decompression melting of ambient upper mantle in response to lithospheric extension associated with the Alpine Orogeny.