Flux contribution of coherent structures and its implications for the exchange of energy and matter in a tall spruce canopy

The flux contribution of coherent structures to the total exchange of energy and matter is investigated in a spruce canopy of moderate density in heterogeneous, complex terrain. The study deploys two methods of analysis to estimate the coherent exchange: conditional averages in combination with wavelet analysis, and quadrant analysis. The data were obtained by high-frequency single-point measurements using sonic anemometers and gas analysers at five observation heights above and within the canopy and subcanopy, and represent a period of up to 2.5 months. The study mainly addresses the momentum transfer and exchange of sensible heat throughout the roughness sublayer, while results are provided for the exchange of carbon dioxide and water vapour above the canopy. The magnitude of the flux contribution of coherent structures largely depends on the method of analysis, and it is demonstrated that these differences are attributed to differences in the sampling strategy between the two methods. Despite the differences, relational properties such as sweep and ejection ratios and the variation of the flux contribution with height were in agreement for both methods. The sweep phase of coherent structures is the dominant process close to and within the canopy, whereas the ejections gain importance with increasing distance to the canopy. The efficiency of the coherent exchange in transporting scalars exceeds that for momentum by a factor of two. The occurrence of coherent structures results in a flux error less than 4% for the eddy-covariance method. Based on the physical processes identified from the analysis of the ejection and sweep phases along the vertical profile in the roughness sublayer, a classification scheme for the identification of exchange regimes is developed. This scheme allows one to estimate the region of the canopy participating in the exchange of energy and matter with the above-canopy air under varying environmental conditions.     

Trace Metal Solid State Speciation in Aerosols of the Northern Levantine Basin,East Mediterranean

An established three stage sequential leach scheme was applied to a series of selected high volume aerosol samples (n = 35) collected from the Turkish Eastern Mediterranean coastline (Erdemli). Samples were selected according to their air mass back trajectory history to reflect the contrasting mixtures of aerosol material present in the Eastern Mediterranean marine aerosol. Two populations were adopted, those samples which were classed as “anthropogenic” and those which were “Saharan” dominated aerosol populations. Applying the three stage leach it was possible to define the proportion for each of the considered metals (Al, Fe, Cu, Pb, Cd, Zn and Mn) present in the (a) “exchangeable” (b) “carbonate / oxide” and (c) “refractory” phases, representing novel solid state aerosol speciation data for this marine system. Clear trends were established, conforming with data from previous studies with mainly crustal derived metals (Al and Fe) being present in the refractory phases (Al > 88%; Fe > 84%) and those influenced by anthropogenic sources being dominating in the exchangeable phase, although for these metals the variability was comparatively high (12–64%; 19–85%; 40–100% for Zn, Pb and Cd, respectively). For the majority, greater exchangeable fractions were present the lower the crustal source contribution to the aerosol population, whereas the “refractory” fraction exhibited contrasting behaviour. This was illustrated by the novel application of the mixing diagram, presenting each of the three speciation stages against the corresponding percent anthropogenic contribution to each collected sample. Zn, Pb and Cd all illustrated progressive decrease in the percent exchangeable with increasing crustal contribution to the aerosol population. The percent exchangeable was discussed in terms of its use to represent the upper limit of the bioavailable fraction of metal associated with the aerosol, post deposition. The mixing diagram approach enabled the prediction of the residual fractions for Cd, Pb and Zn (41 ± 4%; 62 ± 4% and 82 ± 5%, respectively,) in Saharan end-member material.     

Errors and correction of precipitation measurements in China

In order to discover the range of various errors in Chinese precipitation measurements and seek a correction method, 30 precipitation evaluation stations were set up countrywide before 1993. All the stations are reference stations in China. To seek a correction method for wind-induced error, a precipitation correction instrument called the ＂horizontal precipitation gauge＂ was devised beforehand. Field intercomparison observations regarding 29,000 precipitation events have been conducted using one pit gauge, two elevated operational gauges and one horizontal gauge at the above 30 stations. The range of precipitation measurement errors in China is obtained by analysis of intercomparison measurement results. The distribution of random errors and systematic errors in precipitation measurements are studied in this paper. A correction method, especially for wind-induced errors, is developed. The results prove that a correlation of power function exists between the precipitation amount caught by the horizontal gauge and the absolute difference of observations implemented by the operational gauge and pit gauge. The correlation coefficient is 0.99. For operational observations, precipitation correction can be carried out only by parallel observation with a horizontal precipitation gauge. The precipitation accuracy after correction approaches that of the pit gauge. The correction method developed is simple and feasible.     

Characteristics and variations of the East Asian monsoon system and its impacts on climate disasters in China

Recent advances in studies of the structural characteristics and temporal-spatial variations of the East Asian monsoon （EAM） system and the impact of this system on severe climate disasters in China are reviewed. Previous studies have improved our understanding of the basic characteristics of horizontal and vertical structures and the annual cycle of the EAM system and the water vapor transports in the EAM region. Many studies have shown that the EAM system is a relatively independent subsystem of the Asian- Australian monsoon system, and that there exists an obvious quasi-biennial oscillation with a meridional tripole pattern distribution in the interannual variations of the EAM system. Further analyses of the basic physical processes, both internal and external, that influence the variability of the EAM system indicate that the EAM system may be viewed as an atmosphere-ocean-land coupled system, referred to the EAM climate system in this paper. Further, the paper discusses how the interaction and relationships among various components of this system can be described through the East Asia Pacific （EAP） teleconnection pattern and the teleconnection pattern of meridional upper-tropospheric wind anomalies along the westerly jet over East Asia. Such reasoning suggests that the occurrence of severe floods in the Yangtze and Hualhe River valleys and prolonged droughts in North China are linked, respectively~ to the background interannual and interdecadal variability of the EAM climate system. Besides, outstanding scientific issues related to the EAM system and its impact on climate disasters in China are also discussed.     

Holocene climate evolution of the Ugii Nuur basin,Mongolia

In order to evaluate the Holocene palaeoenvironmental evolution of the Ugii Nuur basin, central Mongolia, investigations on chemical and mineralogical properties of lacustrine sediments were carried out on a 630 cm sediment core from lake Ugii Nuur. The interpretation of the record is based on a principal component analysis （PCA） of the elemental composition of the samples. The results show that lacustrine deposition started at 10.6 kyr BP. Low lake level conditions were identified during the Early Holocene （10.6-7.9 kyr BP）. The Mid Holocene （7.9-4.2 kyr BP） was characterized by generally higher lake levels and thus higher moisture supply, but it experienced strong climatic fluctuations. Arid conditions prevailed from 4.2-2.8 kyr BP and were followed by a stable, more humid phase until today.     

Metallogenic mechanisms of super-large Cu and Au deposits in the Dexing region and simulating experiments

Based on the results of previous studies and under the direction of the theory of “ore deposit genesis”, the authors made use of high temperature and high pressure experimental facilities and conditions at the Tectono-geochemistry Research Room under the State Key Laboratory of Ore Deposit Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, and put the focus on the multi-source of tectonically controlling ore-forming materials, the characteristics of multi-stage and multi-episode hydrothermal activities and mineralization and the characteristics of multi-genesis and multi-ore deposition so as to shed light on the metallogenic mechanisms of super-large Cu and Au deposits. In addition simulating experiments were made on multi-stage and multi-episode tectonic activities and rock and ore deformation, multi-stage and multi-episode tectonic activities and mobilization and migration of ore-forming materials, and multi-stage and multi-episode tectonic activities and superimposition and enrichment of ore-forming materials. The experimental results showed that under the action of multi-stage and multi-episode tectonic stress the deformation and fragmentation of not only rocks and ores have been intensified, and but also the ore-forming materials originally disbursed in the rocks and ores have been mobilized and migrated and superimposed and enriched. The experimental results also provided the scientific experimental data and grounds for deep-going research on the rules of metallogenesis and geneses of super-large ore deposits in the Dexing region, Jiangxi Province.     

Geochemical characteristics,cooling history and mineralization significance of Zhangtiantang pluton in South Jiangxi Province,P.R. China

The zircon SHRIMP dating of the Zhangtiantang granite gave an age of 159±7 Ma., which shows that the granite was produced at the early Late Jurassic. The Ar-Ar plateau ages of biotite and K-feldspar from the Zhangtiantang pluton are 153.2±1.1 Ma and 135.8±1.2 Ma, respectively. The Ar-Ar anti-isochrone ages of biotite and K-feldspar are 152.5±1.7Ma and 135.4±2.7Ma, respectively. The ages represent the isotopic closure ages of minerals in the pluton. The Zhangtiantang granites are regarded as peraluminous crust-derived type granites to possess the typical geochemical characteristics of calc-alkaline rocks on continental margin, with enriched Si, K, Al (average value of A/CNK as 1.18), HREE, Rb, U, and Th, heavily depleted V, Cr, Co, Ni, Ti, Nb-Ta, Zr, Sr, P, and Ba, strongly negative Eu and common corundum normative (average value of C as 1.84). The εNd_(t) values of the Zhangtiantang granite are −5.84 to −7.79, and t _2DM values are 1.69 to 1.83 Ga, which indicates partial melting of continental-crust metamorphic sedimentary rocks during the Middle Proterozoic. The cooling history of the Zhangtiantang granitic pluton indicates that the cooling velocity of pluton was faster (about 67°C/Ma) from zircon (158 Ma) to biotite (152 Ma), and was slower (about12°C/Ma) from biotite (152.5 Ma) to K-feldspar (135.8 Ma). It can be deduced that the temporal gap (about 10 Ma) between the granite formmation and W-Sn mineralization in South China may be related to ordinary magma-hydrothermal processes by the variational cooling curve of the pluton. The Zhangtiantang pluton was formed in a compressive setting, with differentiation evolution and mineralization occurring in a relative relaxation setting.     

Evaluation of four supervised learning methods for groundwater spring potential mapping in Khalkhal region (Iran) using GIS-based features

One important tool for water resources management in arid and semi-arid areas is groundwater potential mapping. In this study, four data-mining models including K-nearest neighbor (KNN), linear discriminant analysis (LDA), multivariate adaptive regression splines (MARS), and quadric discriminant analysis (QDA) were used for groundwater potential mapping to get better and more accurate groundwater potential maps (GPMs). For this purpose, 14 groundwater influence factors were considered, such as altitude, slope angle, slope aspect, plan curvature, profile curvature, slope length, topographic wetness index (TWI), stream power index, distance from rivers, river density, distance from faults, fault density, land use, and lithology. From 842 springs in the study area, in the Khalkhal region of Iran, 70 % (589 springs) were considered for training and 30 % (253 springs) were used as a validation dataset. Then, KNN, LDA, MARS, and QDA models were applied in the R statistical software and the results were mapped as GPMs. Finally, the receiver operating characteristics (ROC) curve was implemented to evaluate the performance of the models. According to the results, the area under the curve of ROCs were calculated as 81.4, 80.5, 79.6, and 79.2 % for MARS, QDA, KNN, and LDA, respectively. So, it can be concluded that the performances of KNN and LDA were acceptable and the performances of MARS and QDA were excellent. Also, the results depicted high contribution of altitude, TWI, slope angle, and fault density, while plan curvature and land use were seen to be the least important factors.     

Groundwater depth prediction in a shallow aquifer in north China by a quantile regression model

There is a close relationship between groundwater level in a shallow aquifer and the surface ecological environment; hence, it is important to accurately simulate and predict the groundwater level in eco-environmental construction projects. The multiple linear regression (MLR) model is one of the most useful methods to predict groundwater level (depth); however, the predicted values by this model only reflect the mean distribution of the observations and cannot effectively fit the extreme distribution data (outliers). The study reported here builds a prediction model of groundwater-depth dynamics in a shallow aquifer using the quantile regression (QR) method on the basis of the observed data of groundwater depth and related factors. The proposed approach was applied to five sites in Tianjin city, north China, and the groundwater depth was calculated in different quantiles, from which the optimal quantile was screened out according to the box plot method and compared to the values predicted by the MLR model. The results showed that the related factors in the five sites did not follow the standard normal distribution and that there were outliers in the precipitation and last-month (initial state) groundwater-depth factors because the basic assumptions of the MLR model could not be achieved, thereby causing errors. Nevertheless, these conditions had no effect on the QR model, as it could more effectively describe the distribution of original data and had a higher precision in fitting the outliers.