Two-stage partial melting during the Variscan extensional tectonics (Montagne Noire,France)

International Journal of Earth Sciences - One of the striking features that characterise the late stages of the Variscan orogeny is the development of gneiss and migmatite domes, as well as...     

Suitability of a lumped rainfall–runoff model for flashy tropical watersheds in New Caledonia

ABSTRACT

The GR4H lumped hourly rainfall–runoff model was assessed for its integration in a ridge-to-reef modelling framework. Particular attention was paid to rainfall representation, robustness of parameter estimates and ability to reproduce the main runoff features. The study was conducted in four tropical mountainous watersheds in New Caledonia, which are exposed to intense rainfall events, large annual climatic variations triggered by El Niño oscillation, and wildfires. The inverse distance and elevation weighting algorithm outperformed other classical rainfall interpolation methods under data-limited conditions. The time span of data needed for robust calibration was site specific and varied from 6–7 years to 10 years, which may be linked to El Niño events and to wildfires. With sufficient data, simulation quality was equivalent during the calibration and validation periods. The GR4H model was generally able to simulate both flash floods and large annual variations. The model was more reliable when simulating wet years and watersheds not subject to land-cover changes.     

地质观测、地震剖面和重力测量的综合方法在前陆褶皱冲断带的应用：以天山北麓呼图壁河剖面为例

褶皱逆冲带的几何学研究是造山带研究的热点,但是无论是传统构造地质学方法还是地球物理学方法都在研究褶皱逆冲带几何特征时存在多解性.为了制约这种多解性,本文以天山北麓的呼图壁河剖面为列,介绍一种地质与地球物理相结合的研究方法.该方法首先沿呼图壁河剖面进行详细的地表观测,获取地表的构造地质数据形成初步的地质模型,其次结合地表构造和钻井分层数据,对收集到的石油地震剖面进行重新解释.然而,地震反射数据只分布在盆地内部,在盆山结合带缺失或者不清晰,因此对该剖面进行了重力测量并计算出布格重力异常.结合盆地各沉积地层和基底密度值,用重力正演方法模拟呼图壁河剖面的密度结构.研究结果显示沿呼图壁河剖面并不存在天山北缘断裂,盆地的沉积盖层可以从准噶尔盆地连续过度到天山内部并不整合覆盖在天山古生代基底之上.这一结果与西段金钩河剖面的天山基底逆冲到准噶尔盆地显然不同,说明了天山北缘盆山结合带构造的多样性.利用平衡剖面技术,恢复的呼图壁河平衡剖面缩短量约为4.8 km,对比前人研究,说明了天山北缘的缩短量沿东西方向存在显著的不均一性.本研究也说明这种构造地质与地震及非震地球物理相结合的方法可以广泛地被应用于褶皱逆冲带.     

Significance of the clay mineral distribution in fluvial sediments of the Neogene to Recent Himalayan Foreland Basin (west‐central Nepal)

Clay mineral assemblages of the Neogene Himalayan foreland basin are studied to decipher their significance with respect to tectonic and climate processes. Fluvial deposits of the Siwalik Group (west‐central Nepal), and sediment of the Ganga River drainage system were analysed for clay mineralogy. The observed clay mineral assemblages are mainly composed of illite (dominant), chlorite, smectite and kaolinite. Illite and chlorite are chiefly of detrital origin, derived from Himalayan sources. Kaolinite and smectite are authigenic, and mainly developed within pore space and as coating of detrital particles. With increasing burial, diagenetic processes affected the original clay mineral signature. Illitisation of smectite and kaolinite occurred below 2500 and 3500 m depth, respectively. Therefore, illite in the lower parts of the Siwalik Group consists of a mixture of inherited illite and illitised smectite and kaolinite, as suggested by illite crystallinity. Detrital grains that make up the framework of the Siwalik Group sandstones mainly consist of quartz, feldspar and lithic fragments, which are principally of sedimentary and metamorphic origin. Lithoclast content increases over time at the expense of quartz and K‐feldspar in response to uplift and erosion of the Lesser Himalaya Series since about 11–10 Ma. Despite mainly felsic source rocks, dominantly physical erosion processes in the Himalayan belt, and high‐energy fluvial depositional systems, smectite is abundant in the <7 Ma Siwalik Group deposits. Analyses of the Siwalik deposits and comparison with the clay mineralogy of the modern drainage system suggest that smectite preferentially formed in floodplains and intermontane valleys during early diagenesis because of downward percolating fluids rich in cations from weathering and soil development. In general, increasing seasonality and aridity linked to variability of the Asian monsoon from about 8 Ma enhanced clay mineral formation and development of authigenic smectite in paleo‐plains on the southern side of the Himalaya.     

Accurate and High‐Precision Determination of Boron Isotopic Ratios at Low Concentration by MC‐ICP‐MS (Neptune)

We report an approach for the accurate and reproducible measurement of boron isotope ratios in natural waters using an MC‐ICP‐MS (Neptune) after wet chemistry sample purification. The sample matrix can induce a drastic shift in the isotopic ratio by changing the mass bias. It is shown that, if no purification is carried out, the direct measurement of a seawater diluted one hundred times will induce an offset of ?7‰ in the isotopic ratio, and that, for the same concentration, the greater the atomic mass of the matrix element, the greater the bias induced. Whatever the sample, it is thus necessary to remove the matrix. We propose a method adapted to water samples allowing purification of 100 ng of boron with a direct recovery of boron in 2 ml of 3% v/v HNO₃, which was our working solution. Boron from the International Atomic Energy Agency IAEA‐B1 seawater reference material and from the two groundwater reference materials IAEA‐B2 and IAEA‐B3, was chemically purified, as well as boron from the certified reference material NIST SRM 951 as a test. The reproducibility of the whole procedure (wet chemistry and MC‐ICP‐MS measurement) was ± 0.4‰ (2s). Accuracy was verified by comparison with positive‐TIMS values and with recommended values. Seawater, being homogeneous for boron isotope ratios, is presently the only natural water material that is commonly analysed for testing accuracy worldwide. We propose that the three IAEA natural waters could be used as reference samples for boron isotopes, allowing a better knowledge of their isotopic ratios, thus contributing to the certification of methods and improving the quality of the boron isotopic ratio measurements for all laboratories.     

Advantages and challenges of using soil water isotopes to assess groundwater recharge dominated by snowmelt at a field study located in Canada

Seasonal signals of stable isotopes in precipitation, combined with measurements of isotope ratios in soil water, can be used for quantitative estimation of groundwater recharge rates. This study investigates the applicability of using the piston flow principle and the peak shift displacement method to estimate actual groundwater recharge rates in a humid Nordic region located in the province of Quebec, Canada. Two different sites with and without vegetation (C1 and C2) in an unconfined aquifer were tested by measuring soil water isotope ratios (¹⁸O/¹⁶O and ²H/¹H) and volumetric pore water content. Core samples were obtained along the vadose zone down to the groundwater table at the two sites (2.45 m for Site C1 and 4.15 m for Site C2). The peak shift method to estimate groundwater recharge rates was shown to be accurate only in certain specific conditions inherent to the soil properties and the topographical situation of the investigated sites. Indeed, at Site C2, recharge from the snowmelt could not be estimated because of heterogeneity in the lower part of the vadose zone. At this same site the later recharge after the snowmelt (in the period from late spring to early autumn) could be estimated accurately because the upper part of the vadose zone was homogeneous. Furthermore, at site C1, runoff/runon phenomena hampered calculations of actual infiltration and thus produced inaccurate results for recharge. These two different site effects (heterogeneity in the first site and runoff/runon in the other site) were identified as being limiting factors in the accurate assessment of actual recharge. This study therefore recommends the use of the peak shift method for (1) humid Nordic regions, (2) homogeneous and thick vadose zones, and (3) areas with few or limited site effects (runoff/runon).     

Rise and Fall of an Egyptian Oasis: Artesian Flow,Irrigation Soils,and Historical Agricultural Development in El‐Deir,Kharga Depression,Western Desert of Egypt

The present study examines the geoarchaeological history of an oasis in Kharga Depression in central Egypt. El‐Deir is renowned for its Ptolemaic temple and Roman fortress on the road from former Hibis (Kharga) to the Nile Valley. During the survey, spring mounds and irrigation soils belonging to an ancient agricultural zone were discovered, and further documented by ceramics found on the site. Our methodology combines the geomorphological interpretation of landforms (especially yardangs) with ceramics and ¹⁴C‐dated charcoal to distinguish and date former agricultural areas in El‐Deir. The results show that the oasis experienced several phases of soil accretion and destruction through time. Playa sediments were deposited in the humid early Holocene and severely eroded by deflation before the onset of irrigated agriculture between Pharaonic and Persian times. Very fast vertical soil accretion occurred in the Ptolemaic period, but irrigation soils were later destroyed during the Roman period by a combination of wind deflation and flash floods (second to fourth century A.D.), suggesting a period of climate instability. The case of El‐Deir invites reevaluation of constructive agencies for the development of irrigated land and destructive agencies as limiting factors for the sustainability of agricultural practices in late antiquity.     

Travel time to a well pumping an unconfined aquifer without recharge

A solution is given for the travel time to a well pumping an ideal, horizontal unconfined aquifer, under steady-state conditions, when recharge from infiltration is negligible. Three forms of the solution are provided: a closed-form solution, an integral to be calculated in a worksheet, and a simple equation. The three forms of the solution give travel times nearly identical to those obtained using a finite-element code for saturated and unsaturated flow and particle tracking.