Pyrolysis of Huadian oil shale by electrical heating on different heating rates

The electrical heating experiments on oil shale sample from Huadian of Jilin were carried out by the pyrolysis method at three different heating rate 2℃/ min,5℃/ min and 10℃/ min in the temperature range of 30℃-750℃ . Heating rate 2℃/ min is considered low,while intermediate one covers the range 5℃/ min and high heating rate is 10℃/ min. The controlling parameters studied were the final pyrolysis temperature and the influence of the heating rate as well as type. The heating rate has an important effect on the pyrolysis of oil shale and the amount of residual carbon obtained therefore. It is found that increasing the heating rate and pyrolysis temperature also increases the production of oil and the total weight loss. Higher heating rates resulted in higher rates of accumulation. The rate of oil and water collection passed through the maximum of different heating rates at different pyrolysis temperatures. Heating rate affected density,oil conversion and oil yield.     

Contrasting responses of dimictic and polymictic lakes to environmental change: a spatial and temporal study

Although comparative analyses between dimictic and polymictic lakes have noted the key role of mixing regime in governing water quality, limnologists have historically focused on dimictic lakes, leaving polymictic lakes relatively understudied. In this study, we investigated whether the effects of agricultural development on water quality differed between dimictic and polymictic lakes in a naturally nutrient-rich region of Alberta, Canada. Through a spatial limnological analysis of 36 sites, we found that the relationship between surface water total phosphorus concentration and the percent of agriculture (% Agr) in the catchments differed between dimictic and polymictic lakes, where the proportion of variance explained was much more pronounced in the dimictic (79% explained) than in the polymictic systems (7% explained). Paleolimnological analyses of subfossil chironomids in surface sediment samples (0–1 cm) from 18 of the 36 study lakes, and in sediment core profiles from the dimictic and polymictic basins of a eutrophic lake, showed that water quality differed between mixis groups. We found that the surface sediment chironomid assemblages differed significantly between polymictic and dimictic lakes. Detailed analyses of the sediment cores demonstrated that the two basin types differed in their responses to land-use change through time, as only the dimictic basin showed a parallel increase in anoxia with increasing agricultural development. We suggest that in naturally-fertile landscapes, external nutrient loading exerts a more notable effect on dimictic lakes, whereas internal nutrient loading is more important in polymictic systems.     

On the combination of global and local data in collocation theory

Due to the successful operation of dedicated satellite gravity missions, nowadays high-accuracy global gravity field models have become available. This triggers the challenge to optimally combine this long to medium wavelength gravity field information derived from space-borne data with high-resolution terrestrial gravity data. In this paper, the least squares collocation concept is revised with the attempt to consistently unify the combination procedure in such a way that the full information contained in both data sets is merged. For example, in local or regional geoid determination the remove-restore method is usually applied only partially taking into account the accuracy of the global model coefficients used for the long-wavelength reduction. The key advantage of the extended formulation is the fact that it automatically accounts for the error covariance of all data types involved. The applicability, feasibility and performance of the proposed method is investigated in the frame of numerical closed-loop simulations. The two main fields of application, i.e., the improvement of a global gravity field model by terrestrial gravity field data, and, vice versa, the support to a regional geoid solution by the incorporation of a global gravity field model, have been analyzed and assessed. Although applied under simplified conditions, it could be shown that the method works and is practically applicable.     

Climate changes during the last glacial termination inferred from diatom-based temperatures and pollen in a sediment core from Längsee (Austria)

A sediment core section from Längsee, a small meromictic lake in the southern Alpine lowland (Carinthia, Austria) close to the Würmian ice margin, was investigated by means of diatoms and pollen. The main aims of the study were to reconstruct water temperature as a signal of climate change during the last glacial termination, compare the aquatic and terrestrial response to the changing climate, and place our findings into a climatic frame on the northern hemispheric scale. A calibration data set (ALPS06) of 116 lakes was constructed using data from newly studied lakes and from two previously published data sets and we established a transfer function for predicting summer epilimnetic water temperatures (SEWT). A locally weighted weighted average regression and calibration model (R _jack ²  = 0.89; RSMEP = 1.82°C) was applied to the fossil diatom assemblages in order to reconstruct SEWT. Three major sections were distinguished in the time window of approximately 19–13 cal ka BP, which fitted well with the oxygen isotope curve and the isotope-event stratigraphy from the Greenland ice-core GRIP. The first section was a warming period (SEWT range from 11.6 to 18.0°C; average 15.8°C = ca. 6°C below present) called the Längsee oscillation, which probably correlates with the warmer sub-section (GS-2b) of the Greenland Stadial 2. The subsequent section represents a climate cooling, called the Längsee cold period (SEWT range between 10.6 and 15.9°C; average 12.9°C), which probably corresponds with the sub-section GS-2a of the Greenland Stadial 2, the Heinrich 1 cold event of the North Atlantic, and partially the Gschnitz Stadial in the Alps. The Längsee cold period shows a tri-partition: Two colder phases are separated by a warmer inter-phase. The passive ordination of the core sample scores along maximum water depth indicated that the Längsee cold period was drier than the Längsee oscillation. Strong short-term fluctuations during the Längsee oscillation and the Längsee cold period indicate climate instability. The third section represented climate warming during the Längsee late glacial interstadial (=Greenland Interstadial 1, GI-1) with an average SEWT of 17.5°C. From the minor climatic fluctuations during this interstadial, mainly indicated by pollen, the fluctuation most likely related to the Gerzensee oscillation showed a SEWT decline. During the early immigration and expansion period of shrubs and trees, aquatic and terrestrial records showed distinct discrepancies that might have arose because of time lags in response and differences in sensitivity.     

Copper- and iron-induced injuries in roots and rhizomes of reed (Phragmites australis)

About 1 mg/g dw Cu²⁺ and 8 mg/g dw Fe²⁺ were found in roots of reed plants when fed with heavy metal concentrations of 100 μM Cu²⁺ and 10 mM Fe²⁺ under hypoxia. Roots seemed to act as a kind of filter since the amounts in rhizomes were only 0.06 mg Cu²⁺/g dw and 2 mg Fe²⁺/g dw. Increased contents of both ions reduced posthypoxic respiration capacity by 40–50% and also the sum of adenylates (ATP, ADP, AMP) by the same order of magnitude, although energy charge values remained above 0.85 in Cu²⁺ and 0.79 in Fe²⁺ treatments. Energy metabolism of rhizomes was not affected. Copper and iron contents of roots as well as of rhizomes were high enough to induce oxidative stress when roots were fed with 40 μM Cu²⁺ and 1 mM Fe²⁺, respectively.From our results we conclude that increased, but environmentally attainable, amounts of copper and reduced iron ions disturb root energy metabolism, and therefore root functioning and development. Latent injuries, based on oxidative stress, may be harmful for roots and rhizomes under long term exposure.     

Modeling ground water flow in alluvial mountainous catchments on a watershed scale

In large mountainous catchments, shallow unconfined alluvial aquifers play an important role in conveying subsurface runoff to the foreland. Their relatively small extent poses a serious problem for ground water flow models on the river basin scale. River basin scale models describing the entire water cycle are necessary in integrated water resources management and to study the impact of global climate change on ground water resources. Integrated regional-scale models must use a coarse, fixed discretization to keep computational demands low and to facilitate model coupling. This can lead to discrepancies between model discretization and the geometrical properties of natural systems. Here, an approach to overcome this discrepancy is discussed using the example of the German-Austrian Upper Danube catchment, where a coarse ground water flow model was developed using MODFLOW. The method developed uses a modified concept from a hydrological catchment drainage analysis in order to adapt the aquifer geometry such that it respects the numerical requirements of the chosen discretization, that is, the width and the thickness of cells as well as gradients and connectivity of the catchment. In order to show the efficiency of the developed method, it was tested and compared to a finely discretized ground water model of the Ammer subcatchment. The results of the analysis prove the applicability of the new approach and contribute to the idea of using physically based ground water models in large catchments.     

Influence of root characteristics and soil variables on the uprooting mechanics of Avena sativa and Medicago sativa seedlings

The success of seedlings and rejuvenated woody debris growing on river bedforms depends on the resistance to uprooting by flow provided by their simple root architecture. Avena sativa and Medicago sativa seedlings were used in flume experiments as prototypes for juvenile riparian plants. Very little is known about the magnitude of root anchoring forces and the role of secondary roots of such simple root systems. We performed 1550 vertical uprooting experiments on Avena sativa and Medicago sativa seedlings grown in quartz sand. Seedlings were pulled up by direct traction using a wheel driven by a computer‐controlled motor and the force was recorded. Roots were scanned and architectural parameters (root length and number of roots) determined. Uprooting force and work (the integral of the applied force times the distance over which it is applied) were then related to root architecture and soil variables. Resistance to uprooting increased with decreasing sediment size and sediment moisture content. The initial response of the root–soil system to uprooting showed linear elastic behaviour with modulus increasing with plant age. While the maximum uprooting force was found to increase linearly with total root length and be mainly dependent on the length of the main root, uprooting work followed a power law and has to be related to the whole root system. Thus, for the young plants we considered, secondary roots are responsible for the ability to withstand environmental disturbances in terms of duration rather than magnitude. This distinction between primary and secondary roots can be of crucial importance for seedlings of riparian species germinating on river bars and islands where inundation is a main cause of mortality. Beyond clarifying the biomechanical role of soil and root variables, the uprooting statistics obtained are useful in interpreting and designing ecomorphodynamic flume experiments. Copyright © 2014 John Wiley & Sons, Ltd.     

On the developments of spectral wave models: numerics and parameterizations for the coastal ocean

The development of numerical wave models for coastal applications, including coupling with ocean circulation models, has spurred an ongoing effort on theoretical foundations, numerical techniques, and physical parameterizations. Some important aspects of this effort are reviewed here, and results are shown in the case of the French Atlantic and Channel coast using version 4.18 of the WAVEWATCH III ^R model. Compared to previous results, the model errors have been strongly reduced thanks to, among other things, the introduction of currents, coastal reflection, and bottom sediment types. This last item is described here for the first time, allowing unprecedented accuracy at some sites along the French Atlantic Coast. The adequate resolution, necessary to represent strong gradients in tidal currents, was made possible by the efficiency brought by unstructured grids. A further increase in resolution, necessary to resolve surf zones and still cover vast regions,will require further developments in numerical methods.     

Fingerprinting feldspar phenocrysts using crystal isotopic composition stratigraphy: implications for crystal transfer and magma mingling in S-type granites

 Microsampling of cm-scale feldspar crystals within an S-type granite from the Lachlan Fold Belt of southeastern Australia has revealed complex internal Sr and Nd isotopic variations. The observed isotopic zonations are in part interpreted as recording feldspar crystallisation in a dynamically mixing magma system, the isotopic composition of which was varying in response to the influx of more mafic and isotopically more mantle-like magmas, the latter stages of which are now represented in modified form by microgranular enclaves. Similar core to rim isotopic variations in feldspar megacrysts from a microgranular enclave and the adjacent host granite strongly suggest megacrysts in the enclave were transferred from the granitic magma during crystallisation. Feldspar rims have higher ⁸⁷Sr/⁸⁶Sr_i and lower ɛ_Nd(i) than adjacent whole rock analyses, but match those of mineral separates from the surrounding enclave matrix. This suggests that the final stages of megacryst growth occurred in the presence of a component that had previously interacted with a high ⁸⁷Sr/⁸⁶Sr, low ɛ_Nd(i) component such as metasedimentary wall rocks. Isotopic heterogeneities are also presererved within different mineral phases in the enclave matrix, suggesting that differing phases grew at differing stages of equilibration between the enclave magma and its host granitic magma. Our results reveal major isotopic heterogeneities on a single crystal and also inter-mineral scale in a pluton which shows well constrained evidence for magma mingling. These results indicate the suitability of feldspars as recorders of isotopic change in magmatic systems, even those which have cooled slowly in the plutonic environment and suggest that much heterogeneity in plutonic systems may be overlooked on a whole rock scale. Received: 28 September 1998 / Accepted: 29 December 1999