A comparison of parameterized vs. measured transilient mixing coefficients for a convective mixed layer

The parameterization for transilient turbulence coefficients suggested by Stull and Driedonks (SD. 1987) is tested against the large-eddy simulations (LES) of Ebert et al. (ESS, 1989) for the special case of an idealized convective boundary layer. The SD parameterization is based on a nonlocal approximation to the turbulence kinetic energy (TKE) equation, and requires turbulent exchange (i.e., the matrix of transilient mixing coefficients is assumed to be symmetric) and dominance of the smaller eddies (i.e., elements closer to the main diagonal of the matrix are greater). Measurements from the LES model, however, show that the transilient matrix is asymmetric in convective situations, with larger eddies dominating.Mean-state conditions such as the deep convective mixing and mixed-layer growth are satisfactorily described by the parameterization, but the surface layer is too deep and the entrainment zone thickness is poorly defined. Turbulence properties such as skewed vertical velocity distributions are not possible within the constraint of a symmetric matrix, and partial convective overturning is also not possible because of the restriction that small eddies dominate. Future improved parametcrizations might continue to be based on the TKE equation, but should allow transilient matrix asymmetry.Research was performed while the author worked at the Institute of Atmospheric Physics, German Aerospace Research Establishment (DLR), D-8031 Weling. Germany.     

Stand structure,floristic composition and species diversity along altitudinal gradients of a Bornean mountain range 30 years after selective logging

The mountain ecosystem is a hotspot of biodiversity and provides a significant contribution to the humans' livelihoods. However, there is still a lack of information regarding floral diversity and how it has been affected due to a logging operation in Sarawak. A study was conducted to determine vegetation recovery at the Heart of Borneo conservation area at different elevations: 750–1200 m(S1), 1200–1500 m(S2) and 1500 m(S3). A total of 891 trees were enumerated. The trees comprised 55 families, 98 genera and 203 species. The lowest elevation site, S1, contained the highest number of species(117) and families(42), while the highest elevation site, S3, contained the lowest diversity(25 families and 59 species). A similar forest structure was recorded, whereby diameter at breast height(dbh), basal area and height decreased as elevation increased. The most speciose families in S1 were Dipterocarpaceae(11 species) and Lauraceae(10 species), while Lauraceae and Fagaceae were the dominant tree families at S2 and S3. Secondary tree species are still abundantly found in the logged plots, especially at S2(45.5%), indicating that after 30 years, these stands are still in the recovery stages. The logged plots retained typical secondary forest appearances with lower canopy diameters and heights and dbh than the unlogged forest. Although the species richness approached that of the unlogged plots, especially at S1(90.9%) and S3(94.9%), there were still major differences in the floristic compositions between logged and unlogged plots(35.4%, 21.5% and 44.7% for S1, S2 and S3, respectively). Although potential seed sources were in close proximity, succession at S2 has proceeded much slower than at S1 and S3. Lower concentrations of soil nutrients, especially N, may be the main reason for the slow recovery. In conclusion, the results suggested that the selectively logged forest at the Payeh Maga Highland required more than three decades to recover and achieve a climate forest stage.     

Disentangling late-Holocene climate and land use impacts on an Austrian alpine lake using seasonal temperature anomalies,ice-cover,sedimentology, and pollen tracers

Major and trace elements, minerals and grain-size were analysed from a sediment core covering the last 4,000 years of an Austrian Alpine lake (Oberer Landschitzsee, ObLAN, 2,076 m a.s.l.). These analyses were combined with autumn and spring temperature anomalies and ice-cover estimated from a diatom and chrysophyte cyst, thermistor-based regional calibration dataset and selected pollen markers published previously. Diatom-inferred pH (Di-pH) and DOC (Di-DOC) completed the multi-proxy approach, which, together with ordination techniques (PCA and RDA), helped (1) to confirm proposed climatic patterns and hypotheses, and (2) to disentangle the complex interactions between climatic and anthropogenic impacts. Shifts in chemical and physical weathering, erosion, production, lake stratification, redox potentials and air pollution were the major processes that have affected Oberer Landschitzsee in relation to climate, lake/catchment interactions, and human impact. Geochemistry supported the finding that the four waves of high-altitude land use (Early to Middle Bronze, ca. 1,800–1,300 B.C.; Late Bronze to Hallstatt, ca. 1,000–500 B.C.; Celtic to Roman, ca. 300 B.C.–400 A.D.; and Medieval, ca. 1,000–1,600 A.D.) were coupled mainly with warm periods. Increased production, onset of lake stratification, and the deterioration of hypolimnetic oxygen conditions were the major changes governing in-lake processes during climate warming. They resulted in specific element assemblages associated with organic matter accumulation (Br), oxygen depletion (As, Ga, Cu, S), and changes in redox (Fe/Mn). The Se/Di-DOC ratio was introduced to track shifts between in-lake production and allochthonous sources. Nutrient loading from pastures, coupled with climate warming, could explain that in-lake production was highest during Roman and Medieval land use. Lithogenic elements mainly originated from chemical weathering of silicate bedrock and they increased when intense land-use was coupled with climate deterioration and/or increased humidity. These perturbations were highest during a High Medieval climate fluctuation around 1,000 A.D. The association of sand with LOI and C/N and the decoupling of sand from quartz and feldspar separates erosion from physical weathering. Di-DOC, S, and C/N showed hybrid characters in relation to climate and human impact. The mineral proportions indicated gradients in relation to weathering, snow-cover and running waters, as well as vegetation. Air pollution by metallurgic industries, starting during the High Medieval and culminating during the Late Medieval, caused lead accumulation and could have contributed to As and S enrichment. Corresponding features in the distribution of selected elements and pollen tracers, as well as changes in mineral proportions, supported the hypotheses of shifts in seasonal climate and an overall trend towards more continental climate conditions since Medieval times.     

A lost Tethyan evaporitic basin: Evidence from a Cretaceous hemipelagic meta‐selenite – red chert association in the Eastern Mediterranean realm

Ancient evaporite deposits are geological archives of depositional environments characterized by a long‐term negative precipitation balance and bear evidence for global ocean element mass balance calculations. Here, Cretaceous selenite pseudomorphs from western Anatolia (‘Rosetta Marble’) — characterized by their exceptional morphological preservation — and their ‘marine’ geochemical signatures are described and interpreted in a process‐oriented context. These rocks recorded Late Cretaceous high‐pressure/low‐temperature, subduction‐related metamorphism with peak conditions of 1·0 to 1·2 GPa and 300 to 400°C. Metre‐scale, rock‐forming radiating rods, now present as fibrous calcite marble, clearly point to selenitic gypsum as the precursor mineral. Stratigraphic successions are recorded along a reconstructed proximal to distal transect. The cyclical alternation of selenite beds and radiolarian ribbon‐bedded cherts in the distal portions are interpreted as a two type of seawater system. During arid intervals, shallow marine brines cascaded downward into basinal settings and induced precipitation. During more humid times, upwelling‐induced radiolarian blooms caused the deposition of radiolarite facies. Interestingly, there is no comparable depositional setting known from the Cenozoic world. Meta‐selenite geochemical data (δ¹³C, δ¹⁸O and ⁸⁷Sr/⁸⁶Sr) plot within the range of reconstructed middle Cretaceous seawater signatures. Possible sources for the ¹³C‐enriched (mean 2·2‰) values include methanogenesis, gas hydrates and cold seep fluid exhalation. Spatially resolved component‐specific analysis of a rock slab displays isotopic variances between meta‐selenite crystals (mean δ¹³C 2·2‰) and host matrix (mean δ¹³C 1·3‰). The Cretaceous evaporite‐pseudomorphs of Anatolia represent a basin wide event coeval with the Aptian evaporites of the Proto‐Atlantic and the pseudomorphs share many attributes, including lateral distribution of 600 km and stratigraphic thickness of 1·5 to 2·0 km, with the evaporites formed during the younger Messinian salinity crisis. The Rosetta Marble of Anatolia may represent the best‐preserved selenite pseudomorphs worldwide and have a clear potential to act as a template for the study of meta‐selenite in deep time.     

Pyrolysis of Huadian oil shale by electrical heating on different heating rates

The electrical heating experiments on oil shale sample from Huadian of Jilin were carried out by the pyrolysis method at three different heating rate 2℃/ min,5℃/ min and 10℃/ min in the temperature range of 30℃-750℃ . Heating rate 2℃/ min is considered low,while intermediate one covers the range 5℃/ min and high heating rate is 10℃/ min. The controlling parameters studied were the final pyrolysis temperature and the influence of the heating rate as well as type. The heating rate has an important effect on the pyrolysis of oil shale and the amount of residual carbon obtained therefore. It is found that increasing the heating rate and pyrolysis temperature also increases the production of oil and the total weight loss. Higher heating rates resulted in higher rates of accumulation. The rate of oil and water collection passed through the maximum of different heating rates at different pyrolysis temperatures. Heating rate affected density,oil conversion and oil yield.     

Contrasting responses of dimictic and polymictic lakes to environmental change: a spatial and temporal study

Although comparative analyses between dimictic and polymictic lakes have noted the key role of mixing regime in governing water quality, limnologists have historically focused on dimictic lakes, leaving polymictic lakes relatively understudied. In this study, we investigated whether the effects of agricultural development on water quality differed between dimictic and polymictic lakes in a naturally nutrient-rich region of Alberta, Canada. Through a spatial limnological analysis of 36 sites, we found that the relationship between surface water total phosphorus concentration and the percent of agriculture (% Agr) in the catchments differed between dimictic and polymictic lakes, where the proportion of variance explained was much more pronounced in the dimictic (79% explained) than in the polymictic systems (7% explained). Paleolimnological analyses of subfossil chironomids in surface sediment samples (0–1 cm) from 18 of the 36 study lakes, and in sediment core profiles from the dimictic and polymictic basins of a eutrophic lake, showed that water quality differed between mixis groups. We found that the surface sediment chironomid assemblages differed significantly between polymictic and dimictic lakes. Detailed analyses of the sediment cores demonstrated that the two basin types differed in their responses to land-use change through time, as only the dimictic basin showed a parallel increase in anoxia with increasing agricultural development. We suggest that in naturally-fertile landscapes, external nutrient loading exerts a more notable effect on dimictic lakes, whereas internal nutrient loading is more important in polymictic systems.     

On the combination of global and local data in collocation theory

Due to the successful operation of dedicated satellite gravity missions, nowadays high-accuracy global gravity field models have become available. This triggers the challenge to optimally combine this long to medium wavelength gravity field information derived from space-borne data with high-resolution terrestrial gravity data. In this paper, the least squares collocation concept is revised with the attempt to consistently unify the combination procedure in such a way that the full information contained in both data sets is merged. For example, in local or regional geoid determination the remove-restore method is usually applied only partially taking into account the accuracy of the global model coefficients used for the long-wavelength reduction. The key advantage of the extended formulation is the fact that it automatically accounts for the error covariance of all data types involved. The applicability, feasibility and performance of the proposed method is investigated in the frame of numerical closed-loop simulations. The two main fields of application, i.e., the improvement of a global gravity field model by terrestrial gravity field data, and, vice versa, the support to a regional geoid solution by the incorporation of a global gravity field model, have been analyzed and assessed. Although applied under simplified conditions, it could be shown that the method works and is practically applicable.     

Climate changes during the last glacial termination inferred from diatom-based temperatures and pollen in a sediment core from Längsee (Austria)

A sediment core section from Längsee, a small meromictic lake in the southern Alpine lowland (Carinthia, Austria) close to the Würmian ice margin, was investigated by means of diatoms and pollen. The main aims of the study were to reconstruct water temperature as a signal of climate change during the last glacial termination, compare the aquatic and terrestrial response to the changing climate, and place our findings into a climatic frame on the northern hemispheric scale. A calibration data set (ALPS06) of 116 lakes was constructed using data from newly studied lakes and from two previously published data sets and we established a transfer function for predicting summer epilimnetic water temperatures (SEWT). A locally weighted weighted average regression and calibration model (R _jack ²  = 0.89; RSMEP = 1.82°C) was applied to the fossil diatom assemblages in order to reconstruct SEWT. Three major sections were distinguished in the time window of approximately 19–13 cal ka BP, which fitted well with the oxygen isotope curve and the isotope-event stratigraphy from the Greenland ice-core GRIP. The first section was a warming period (SEWT range from 11.6 to 18.0°C; average 15.8°C = ca. 6°C below present) called the Längsee oscillation, which probably correlates with the warmer sub-section (GS-2b) of the Greenland Stadial 2. The subsequent section represents a climate cooling, called the Längsee cold period (SEWT range between 10.6 and 15.9°C; average 12.9°C), which probably corresponds with the sub-section GS-2a of the Greenland Stadial 2, the Heinrich 1 cold event of the North Atlantic, and partially the Gschnitz Stadial in the Alps. The Längsee cold period shows a tri-partition: Two colder phases are separated by a warmer inter-phase. The passive ordination of the core sample scores along maximum water depth indicated that the Längsee cold period was drier than the Längsee oscillation. Strong short-term fluctuations during the Längsee oscillation and the Längsee cold period indicate climate instability. The third section represented climate warming during the Längsee late glacial interstadial (=Greenland Interstadial 1, GI-1) with an average SEWT of 17.5°C. From the minor climatic fluctuations during this interstadial, mainly indicated by pollen, the fluctuation most likely related to the Gerzensee oscillation showed a SEWT decline. During the early immigration and expansion period of shrubs and trees, aquatic and terrestrial records showed distinct discrepancies that might have arose because of time lags in response and differences in sensitivity.     

Late quaternary sea‐level changes,crustal movements and coastal evolution in Northumberland,UK

Northumberland lies in the transition between Holocene emergence and submergence and is thus a critical zone for testing models of isostatic rebound. We have collected data from this area to reconstruct relative sea‐level changes and lateral coastline movements for the last 14000 y. These are deposits from tidal marsh, back‐barrier wetland and terrestrial environments producing 47 sea‐level index points from 12 sites. There is no unequivocal evidence for Late Devensian sea levels above present and the reliable sea‐level index points are restricted between −6 m and +2.5 m relative to present and 9.0–2.5 kyr cal. BP. Analysis of these quantifies differential responses to glacio‐ and hydroisostatic rebound, with the northern sites recording a mid‐Holocene sea‐level maximum ca. 2.5 m above present, whereas the southern sites show a maximum ca. 0.5 m above present. These observations show a reasonable fit with the predictions from quantitative models of glacio and hydroisostatic rebound, but there is currently no unique solution of Earth and ice model parameters that will explain all the sea‐level observations. Copyright © 2000 John Wiley & Sons, Ltd.