GIS-based forest fire susceptibility modeling in Pauri Garhwal,India: a comparative assessment of frequency ratio,analytic hierarchy process and fuzzy modeling techniques

This study performs a comparative evaluation of Frequency Ratio (FR), Analytic Hierarchy Process (AHP), and Fuzzy AHP (FAHP) modeling techniques for forest fire susceptibility mapping in Pauri Garhwal, Uttarakhand, India. Locations of past forest fire events reported from November 2002 to July 2019 were collected from the Uttarakhand Forest Department and Forest Survey of India and combined with the ground observations obtained from the manual survey. Then, the locations were categorized into two groups of 70% (10,500 locations) and 30% (4500 locations), randomly, for training and validation purposes, respectively. Forest fire susceptibility mapping was performed on the basis of fourteen different topographic, biological, human-induced and climatic criteria such as Digital Elevation Model, Slope, Aspect, Curvature, Normalized Difference Vegetation Index, Normalized Difference Moisture Index, Topographic Wetness Index, Soil, Distance to Settlement, Distance to Road, Distance to Drainage, Rainfall, Temperature, and Wind Speed. The Receiver Operating Characteristic curve and the Area Under the Curve (AUC) were implemented for validation of the three achieved Forest Fire Susceptibility Maps. The AUC plot evaluation revealed that FAHP has a maximum prediction accuracy of 83.47%, followed by AHP (81.75%) and FR (77.21%). Thus, the map produced by FAHP exhibits the most satisfactory properties. Results and findings of this study will help in developing more efficient fire management strategies in both the open and the protected forest areas (Rajaji and Jim Corbett National Park) of the district.

     

Characterization of organic carbon in black shales of the Kachchh basin,Gujarat, India

Thirty-three black shale samples from four locations on the onland Kachchh basin, western India were analyzed to characterize organic carbon (OC), thermal maturity and to determine the hydrocarbon potential of the basin. Upper Jurassic black shales from the Jhuran Formation (Dhonsa and Kodki areas) are characterized by the presence of chlorite, halloysite, high \(T_{\mathrm{max}}\), low OC, low hydrogen index and high oxygen index. These parameters indicate the OC as type IV kerogen, formed in a marine environment. The rocks attained thermal maturity possibly during Deccan volcanism. Early Eocene samples of the Naredi Formation (Naliya-Narayan Sarovar Road (NNSR) and the Matanomadh areas) are rich in TOC, smectite, chlorite and framboidal pyrite, but have low \(T_{\mathrm{max}}\). These indicate deposition of sediments in a reducing condition, probably in a lagoonal/marsh/swamp environment. Organic carbon of the Naredi Formation of NNSR may be considered as immature type III to IV kerogen, prone to generate coal. Core samples from the Naredi Formation of the Matanomadh area show two fold distribution in terms of kerogen. Organic carbon of the upper section is immature type III to IV kerogen, but the lower section has type II to III kerogen having potential to generate oil and gas after attaining appropriate thermal maturity.     

Structural and luminescent characterisation of uraniferous fluorapatite and haematite associated with phosphatic rocks of the Bijawar group in Sagar District,Madhya Pradesh (India)

The structural and spectroscopic characteristics of phosphatic ferruginous shale samples from the Bijawar Group rocks from Sagar District of Madhya Pradesh (India) have been probed for identification of uranium species. Fluorapatite (\(\hbox {Ca}_{5}\hbox {(PO}_{4})_{3}\hbox {F}\), FAP) and haematite (\(\upalpha \)-\(\hbox {Fe}_{2}\hbox {O}_{3}\)) were identified as the main phases in the separated mineral concentrates. The photoluminescence (PL) and X-ray absorption near edge spectroscopy (XANES) studies pointed to a strong experimental evidence of both U(IV) and U(VI) oxidation states in the mineral concentrate portion obtained from the same parent host rock. The PL spectrum has confirmed the charge transfer (f–d) transition bands in UV and near-UV regions with emission peaks at ca. 290, 313, 336, 399 and 416 nm, which has been attributed to the substitution of \(\hbox {Ca}^{2+}\) ions by U(IV) in FAP and broad structureless emission due to stabilisation of U(VI) as \(\hbox {UO}_{6}^{6-}\) in haematite. Time-resolved spectroscopy studies have revealed biexponential decay components lasting 2–5 ns for U(IV) species and \(10\,\upmu \hbox {s}\) for U(VI) species. These characterisations revealed the fundamental information about the oxidation state and form of uranium in this region. Remediation measures for the Bijawar region are also suggested.     

Numerical simulation of present day tectonic stress across the Indian subcontinent

International Journal of Earth Sciences - In situ measurements of maximum horizontal stress (SHmax) in the Indian subcontinent are limited and do not present regional trends of intraplate stress...     

Measurement of soil-gas radon in some areas of northern Rajasthan,India

The health hazards of the radioactive gas radon on general public are well known. In order to understand the level and distribution of ²²²Rn concentrations in soil-gas in Sri Ganganagar district of Rajasthan, a ²²²Rn survey was carried out for the first time using RAD7, an electronic radon detector manufactured by Durridge Company (USA), at different locations covering a total area of 10,978 km ², having a population of approximately 20 lakh. The measurement of ²²²Rn concentration in soil-gas was carried out at four different depths (10, 40, 70, and 100 cm). The radon concentration in soil-gas for 10, 40, 70, and 100 cm depths ranged from 0.09–4.25, 0.15–6.30, 0.50–9.18, and 0.72–10.40 kBq m ^?3, respectively. The minimum value of radon concentration is observed in 33 GB village at 10 cm depth and maximum for Mohanpura village at 100 cm depth. As expected, our data show an increase of soil-gas radon concentration levels with depth. The present results are compared with the available radon data from other studies.     

Is tidal forcing critical to trigger large Sumatra earthquakes?

Complexity in the earthquake mechanism is manifested in different forms such as fractal distribution, clustering of seismicity, etc., and characterized as critical phenomenon. Occurrences of earthquakes generally represent the state of metastable equilibrium. The Andaman–Sumatra subduction zone is one of the most seismically active corridors (possibly in metastable state) in the world. Recently, the region faced three major earthquakes of magnitude more than 8.5 (M ~ 9.1 on December 26, 2004; M ~ 8.6 on March 28, 2005; M ~ 8.6 on April 11, 2012). Researchers have suggested multiple causes of earthquake generation in this region including the one with possible correlation of tidal stresses with earthquake occurrences. The latter issue, however, has been hotly debated in view of the fact that a small stress generated due to tidal forcing cannot cause such a bigger magnitude earthquake. We study here the impact of tidal forcing on critically generated earthquake phenomena. We examined the statistical behavior of recurrence time interval of earthquakes using the available data for period of about 40 years from 1973 to 2013. We constrain the simple empirical toy model using the concept of catastrophe theory to evaluate the impact of small tidal forcing on the critical state of earthquakes occurrences. In addition to the major role of Helmholtz free energy during the plate motion, our analysis suggests that the stability and critical behavior of the earthquake in Sumatra region could be associated with tidal forcing, however, only for triggering of some of the “Catastrophic–Chaotic” earthquake phenomenon.

     

Study of inertial kinetic Alfven waves around cusp region

The effect of electron inertia on kinetic Alfven wave has been studied. The expressions for the dispersion relation, growth/damping rate and growth/damping length of the inertial kinetic Alfven wave (IKAW) are derived using the kinetic approach in cusp region. The Vlasov-kinetic theory has been adopted to evaluate the dispersion relation, growth/damping rate and growth/damping length with respect to the perpendicular wave number k_⊥ρ_i (ρ_i is the ion gyroradius) at different plasma densities. The growth/damping rate and growth/damping length are evaluated for different m_e/βm_i, where β is the ratio of electron pressure to the magnetic field pressure, m_{i, e} are the mass of ion and electron, respectively, as I=m_e/βm_i represent boundary between the kinetic and inertial regimes. It is observed that frequency of inertial kinetic Alfven wave (IKAW) ω is decreasing with k_⊥ρ_i and plasma density. The polar cusp is an ideal laboratory for studies of nonlinear plasma processes important for understanding the basic plasma physics, as well as the magnetospheric and astrophysical applications of these processes.     

Robertson-Walker cosmological models with perfect fluid in general relativity

Einstein's field equations with variable gravitational and cosmological constants are considered in the presence of perfect fluid for a Robertson-Walker universe by assuming the cosmological term to be proportional to R-m(R is a scale factor and m is a constant).A variety of solutions is presented.The physical significance of the cosmological models has also been discussed.     

Assessment of PM<Subscript>2.5</Subscript> chemical compositions in Delhi: primary vs secondary emissions and contribution to light extinction coefficient and visibility degradation

Haze-fog conditions over northern India are associated with visibility degradation and severe attenuation of solar radiation by airborne particles with various chemical compositions. PM_2.5 samples have been collected in Delhi, India from December 2011 to November 2012 and analyzed for carbonaceous and inorganic species. PM₁₀ measurements were made simultaneously such that PM_10–2.5 could be estimated by difference. This study analyzes the temporal variation of PM_2.5 and carbonaceous particles (CP), focusing on identification of the primary and secondary aerosol emissions, estimations of light extinction coefficient (b_ext) and the contributions by the major PM_2.5 chemical components. The annual mean concentrations of PM_2.5, organic carbon (OC), elemental carbon (EC) and PM_10–2.5 were found to be 153.6 ± 59.8, 33.5 ± 15.9, 6.9 ± 3.9 and 91.1 ± 99.9 μg m^?3, respectively. Total CP, secondary organic aerosols and major anions (e.g., SO₄ ^2? and NO₃ ^?) maximize during the post-monsoon and winter due to fossil fuel combustion and biomass burning. PM_10–2.5 is more abundant during the pre-monsoon and post-monsoon. The OC/EC varies from 2.45 to 9.26 (mean of 5.18 ± 1.47), indicating the influence of multiple combustion sources. The b_ext exhibits highest values (910 ± 280 and 1221 ± 371 Mm^?1) in post-monsoon and winter and lowest in monsoon (363 ± 110 and 457 ± 133 Mm^?1) as estimated via the original and revised IMPROVE algorithms, respectively. Organic matter (OM =1.6 × OC) accounts for ~39 % and ~48 % of the b_ext, followed by (NH₄)₂SO₄ (~21 % and ~24 %) and EC (~13 % and ~10 %), according to the original and revised algorithms, respectively. The b_ext estimates via the two IMPROVE versions are highly correlated (R² = 0.95, root mean square error = 38 % and mean bias error = 28 %) and are strongly related to visibility impairment (r = ?0.72), mostly associated with anthropogenic rather than natural PM contributions. Therefore, reduction of CP and precursor gas emissions represents an urgent opportunity for air quality improvement across Delhi.