The SHAND quaternary system for evaluating the supersilicic or subsilicic crystal-chemistry of eclogite minerals, and potential new UHPM pyroxene and garnet end-members

Summary The stoichiometry of pyroxenes {^viiiX^{2+ vi}Y^{2+ iv}Z⁴⁺ ₂ O₆} and garnets {^xiiX²⁺ ₃ ^viY³⁺ ₂ ^ivZ⁴⁺ ₃ O₁₂} is re-evaluated by a theoretical crystal-chemical approach that takes into account natural phenomena that do not fit with conventional anhydrous stoichiometric mineralogy: the existence in eclogites of microinclusions of other minerals that may have been exsolved from previous supersilicic or subsilicic UHPM pyroxene or garnet. Different definitions of supersilicic and subsilicic are discussed and the one based on the ability to exsolve SiO₂ and leave behind a stoichiometric pyroxene or garnet is recommended for general adoption. The SHAND system (S = Si et al.; H = H; A = Al et al.; N = Na et al.; D = divalents) for projecting multivariate chemical space involving 23 cations and 104 selected natural or potential mineral species on to two essential diagrams (SAND and SHND) is described in full for the first time. Numerous possible chemical exchanges are considered and justified with respect to known mineral phenomena such as cation vacancies, octahedral silicon or protonation. Several new potential end-members are presented, in particular “supersilipyx”, “supersiligar” and “subsiligar”. It is suggested that small quantities of these end-members can be incorporated into UHPM solid-solutions and lead to various exsolution phenomena during eclogite exhumation.     

Shape and distribution analysis of Merensky Reef potholing, Northam Platinum Mine, western Bushveld Complex: implications for pothole formation and growth

Syn-magmatic removal of the cumulate pile during the formation of the Bushveld Complex resulted in “potholes”. Erosion progressed downward in the cumulate pile, resulting in a series of steep, transgressive contacts between locally conformable potholed reefs in the regional pothole sub-facies of the Swartklip Facies in the western limb of the Bushveld Complex. The deepest of these potholes, “third-order” or “FWP2” potholing, occurs where the base of the Merensky Cyclic Unit transgresses the Upper Pseudo-Reef Chromitite marker horizon. The base of a FWP2 pothole on Northam Platinum Mine consists of an unconformable stringer Merensky Chromitite overlain by a medium-grained, poikilitic orthopyroxenite and underlain by either a pegmatitic harzburgite or the medium-grained Lower Pseudo-Reef Anorthosite. Detailed shape and distribution analysis of FWP2 potholes reveals underlying patterns in their shape and distribution which, in turn, suggest a structural control. The ratio between pothole short vs long axes is 0.624 (N=1,385), although the ratio increases from 0.48 to 0.61 in the long axis range 10 to 60 m, then decreases from 0.61 to 0.57 from 61 to 100 m, increasing again from 0.57 to 0.61 from 101 to 400 m, suggesting that there is not a simple relationship between pothole shape and size. Shape (circularity, eccentricity, and dendricity) analysis of a subset of 638 potholes indicates that potholes with long axes <100 m have an elliptical, average normalized shape, elongate on a 120–150° orientation. Potholes with long axis lengths >100 m have an average normalized shape that is bilobate and elongate on a 120° orientation. The average aspect ratio (short axis length divided by long axis length) of potholes is highest for potholes with long axis lengths >100 m and lowest for potholes with long axis lengths between 35 and 60 m. The most common long axis orientation for potholes with long axis lengths <100 m is 150° but 120° for long axis lengths >100 m. Fractal analysis indicates that the distribution of pothole centers is controlled neither by a single nor several interacting fractal dimensions. Autocorrelation (Fry) analysis of the distribution of pothole centers shows recurring pothole distribution trends at 038, 070, and 110° for potholes over the full range of long axis lengths, while the trends of 008 and 152° occur in potholes with long axes lengths between 60 and 100 m. Chi-squared (X ²) analysis of the locations of pothole centers suggests that the distribution of small potholes is highly non-uniform but becomes exponentially more uniform with increasing pothole size. The model which best fits the observed shape and distribution analysis is a combination of protracted independent growth and “nearest neighbor” merging along specific orientations. For instance, the clustered distribution of original pothole centers resulted in merged potholes with long axes lengths of up to 60 m, exhibiting short vs long axes ratios of 0.61, preferred orientations of 150°, and alignment along 010 and 150° trends. Further independent growth allowed for merging of similar-sized (and smaller) neighboring potholes, generating potholes with long axes of up to 100 m in length, a preferred long axis orientation of 150°, and alignment along 010, 040, 075, and 150°. Subsequent preferential merging occurred along a 120° trend, thereby preserving a bilobate form. This implies that while pothole initiation and enlargement may be driven by a “top-down” (i.e., possibly thermomechanical) process, an underlying linear or structural catalyst/control is revealed in changes in pothole shape during enlargement and, furthermore, in the preferred trends along which potholes merged over a considerable period, possibly concomitant with adjustment of major structures in the footwall to the Bushveld Complex and pulses into the magma chamber.     

Surface temperature differences between minerals in crystalline rocks: Implications for granular disaggregation of granites through thermal fatigue

Thermal expansion differences between minerals within rocks under insolation have previously been assumed to drive breakdown by means of granular disaggregation. However, there have been no definitive demonstrations of the efficacy of this weathering mechanism. Different surface temperatures between minerals should magnify thermal expansion differences, and thus subject adjacent minerals to repeated stresses that might cause breakdown through fatigue failure. This work confirms the existence of surface temperature differences between minerals in granitic rocks under simulated short-term temperature fluctuations so as to discriminate their potential for initiating granular disaggregation. The influence of colour, as a surrogate for albedo, and crystal size, as a function of thermal mass are specifically identified because of their ease of quantification. Four rock types with a range of these properties were examined, and subjected to repeated short-term temperature cycles by radiative heating and cooling under laboratory conditions. Results show that while albedo is the main control for overall and individual maximum temperatures, crystal size is the main factor controlling higher temperature differences between minerals. Thus, stones with large differences of mineral sizes can undergo magnified stresses due to thermal expansion differences.     

Evolution from Oceanic Subduction to Continental Collision: a Case Study from the Northern Tibetan Plateau Based on Geochemical and Geochronological Data

Two apparently distinct, sub-parallel, paleo-subduction zonescan be recognized along the northern margin of the Tibetan Plateau:the North Qilian Suture Zone (oceanic-type) with ophioliticmélanges and high-pressure eclogites and blueschistsin the north, and the North Qaidam Belt (continental-type) inthe south, an ultrahigh-pressure (UHP) metamorphic terrane comprisingpelitic and granitic gneisses, eclogites and garnet peridotites.Eclogites from both belts have protoliths broadly similar tomid-ocean ridge basalts (MORB) or oceanic island basalts (OIB)in composition with overlapping metamorphic ages (480–440Ma, with weighted mean ages of 464 ± 6 Ma for North Qilianand 457 ± 7 Ma for North Qaidam), determined by zirconU–Pb sensitive high-resolution ion microprobe dating.Coesite-bearing zircon grains in pelitic gneisses from the NorthQaidam UHP Belt yield a peak metamorphic age of 423 ±6 Ma, 40 Myr younger than the age of eclogite formation, anda retrograde age of 403 ± 9 Ma. These data, combinedwith regional relationships, allow us to infer that these twoparallel belts may represent an evolutionary sequence from oceanicsubduction to continental collision, and continental underthrusting,to final exhumation. The Qilian–Qaidam Craton was probablya fragment of the Rodinia supercontinent with a passive marginand extended oceanic lithosphere in the north, which was subductedbeneath the North China Craton to depths >100 km at c. 423Ma and exhumed at c. 403 Ma (zircon rim ages in pelitic gneiss). KEY WORDS: HP and UHP rocks; subduction belts; zircon SHRIMP ages; Northern Tibetan Plateau     

美国坦帕湾地区供水策略介析

世界范围内的水资源和水环境问题越来越突出。首先系统介绍了美国弗罗里达州坦帕湾地区的水资源利用现状和供水管理策略,对该地区的地表水、地下水、海水淡化和废水利用的情况作了详细分析。该地区从以地下水为主的供水方式,改变为地表水、地下水、海水淡化各占1/3的供水方式的规划思想、经济分析以及管理措施具有积极的参考意义。针对我国的客观背景,进一步探讨了城市供水的挖潜途径,雨水直接回收和中水利用是城市节水的两个有效方式,沿海地区则应对海水淡化予以重视;对于广大的农村乡镇,雨水集水塘和小型平原水库则是提高农村供水条件和改善水环境的一种有效措施。     

2004年印度洋海啸印尼亚齐省灾情遥感监测与分析

2004年12月底印尼苏门答腊岛西北海岸发生里氏9.0级地震,引发印度洋沿岸的印尼、斯里兰卡、泰国、印度等国家先后遭受强烈海啸。印度尼西亚亚齐省是遭受海啸灾害最严重的地区之一。为了评估海啸灾害造成的严重影响,应用遥感和地理信息系统技术,以2005-01-07英国DMC小卫星遥感影像为基础数据源,结合收集到的该地区灾前(2001年)LandsatETM 遥感影像,对亚齐省进行了监测和快速评估。监测结果表明距离震中位置较近的亚齐省苏门答腊岛西海岸遭受影响较严重,亚齐省苏门答腊岛西海岸由于距离震中位置较近遭受严重影响,而苏门答腊岛东海岸则影响较轻,受灾最严重的地区是亚齐省首府班达亚齐市附近。经统计,整个亚齐省遭受海啸严重影响的地区面积约为483km2,其中城市建成区受淹面积约为26·2km2,乡村(镇)地区受淹面积约为430·5km2。文章的最后还结合数字高程模型对海啸灾情的结果进行了分析。结果表明,绝大多数因海啸而受淹地区高程低于20m。     

冲击压实技术在路基工程中的应用研究

通过介绍冲击压实机基本原理,分析冲击压实技术特点,结合工程实例,表明冲击压实技术具有减少路基工后沉降、提高路基整体强度及加固软弱地基作用效果显著,同时填石路堤施工工艺的改进和压实标准进行了研究.     

Groundwater-flow modeling in the Yucatan karstic aquifer, Mexico

The current conceptual model of the unconfined karstic aquifer in the Yucatan Peninsula, Mexico, is that a fresh-water lens floats above denser saline water that penetrates more than 40 km inland. The transmissivity of the aquifer is very high so the hydraulic gradient is very low, ranging from 7–10 mm/km through most of the northern part of the peninsula. The computer modeling program AQUIFER was used to investigate the regional groundwater flow in the aquifer. The karstified zone was modeled using the assumption that it acts hydraulically similar to a granular, porous medium. As part of the calibration, the following hypotheses were tested: (1) karstic features play an important role in the groundwater-flow system; (2) a ring or belt of sinkholes in the area is a manifestation of a zone of high transmissivity that facilitates the channeling of groundwater toward the Gulf of Mexico; and (3) the geologic features in the southern part of Yucatan influence the groundwater-flow system. The model shows that the Sierrita de Ticul fault, in the southwestern part of the study area, acts as a flow barrier and head values decline toward the northeast. The modeling also shows that the regional flow-system dynamics have not been altered despite the large number of pumping wells because the volume of water pumped is small compared with the volume of recharge, and the well-developed karst system of the region has a very high hydraulic conductivity. Electronic Publication     

Paleoecology of a Middle Wisconsin Deposit from Southern California

Analysis of a buried deposit in the Diamond Valley of southern California has revealed well-preserved pollen, wood, and diatom remains. Accelerator mass spectrometry dates of 41,200±2100 and 41,490±1380 ¹⁴C yr B.P. place this deposit in marine isotope stage 3. Diatoms suggest a shallow lacustrine environment. Pollen data suggest that several plant communities were present near the site, with grassland, scrub, chaparral, forest, and riparian communities represented. Comparison with modern pollen suggests similarities with montane forests in the nearby San Bernardino and San Jacinto ranges, indicating vegetation lowering by at least 900 m elevation and temperatures 4°–5°C cooler than today. An increase in high-elevation conifer pollen documents climatic cooling near the profile top. Early-profile diatoms are typical of warm water with high alkalinity and conductivity, whereas later diatoms suggest a higher flow regime and input of cooler water into the system. We suggest that the sequence is part of the cooling phase of an interstadial Dansgaard–Oeschger cycle. Records of the middle Wisconsin period are rare in southern California, but the Diamond Valley site is similar to records from Tulare Lake in the San Joaquin Valley and the ODP Site 893A record from Santa Barbara Basin. It is probable that the Diamond Valley assemblage is a local expression of a vegetation type widespread in the ranges and basins of southwestern California during the middle Wisconsin.