Use of Recycled Polyethylene Terephthalate Strips in Soil Improvement

Geotechnical and Geological Engineering - Many studies have investigated polyethylene terephthalate (PET) and polypropylene fibers in soil improvement. However, there is a lack of research using...     

Earth''s earliest continental lithosphere, hydrothermal flux and crustal recycling

The Kaapvaal craton in southern Africa and the Pilbara craton of northwestern Australia are the largest regions on Earth to have retained relatively pristine mid-Archaean rocks (3.0–4.0 Ga).The Kaapvaal craton covers about 1.2×10⁶ km², and varies in lithospheric thickness between 170 and 350 km. At surface, the craton can be subdivided into a number of Archaean sub-domains; some of the subdomains are also well defined at depth, and local variations in tomography of the lithosphere correspond closely with subdomain boundaries at surface.The Archaean history of the Kaapvaal craton spans about 1 Gyr and can be conveniently subdivided into two periods, each of about the same length as the Phanerozoic. The first period, from circa 3.7-3.1 Ga, records the initial separation of the cratonic lithosphere from the asthenosphere, terminating with a major pulse of accretion tectonics between 3.2 and 3.1 Ga, which includes the formation of “paired metamorphic belts”. This period of continental growth can be compared to plate tectonic processes occurring in modern-day oceanic basins. However, the difference is that in the mid-Archaean, these oceanic processes appear to have occurred in shallower water depths than the modern ocean basins. The second period, from circa 3.1-2.6 Ga, records intra-continental and continental-edge processes: continental growth during this period occurred predominantly through a combination of tectonic accretion of crustal fragments and subduction-related igneous processes, in much the same way as has been documented along the margins of the Pacific and Tethys oceans since the Mesozoic.The intra-oceanic processes resulted in small, but deep-rooted continental nucleii; the first separation of this early continental lithosphere could only have occurred when the mean elevation of mid-oceanicridges sank below sea-level. Substantial recycling of continental lithosphere into the mantle must have occurred during this period of Earth history. During the second period, at least two large continental nucleii amalgamated during collisional processes which, together with internal chemical differentiation processes, created the first stable continental landmass. This landmass, which is known to have been substantially bigger than its present outline, may have been part of the Earth's first supercontinent.The oldest known subdomains of the craton include the oceanic-like rocks of the Barberton greenstone belt. The comagmatic mafic-ultramafic rocks (3.48–3.49 Ga) of this belt represent a remnant of very early oceanic-like lithosphere (known as the Jamestown Ophiolite Complex), which was obducted, approximately 45 Ma after its formation, onto a volcanic arc-like terrain by processes similar to those which have emplaced modern ophiolites at convergent margins of Phanerozoic continents. The early metamorphic history, metamorphic mineralogy, oxygen isotope profiles and degree of hydration of the 3.49 Ga Jamestown Ophiolite Complex are similar to present day subseafloor hydrothermal systems. The ratio of ΔMg to ΔSi for hydrothermally altered igneous rocks, both present day and Archaean, are remarkably uniform at −5(±0.9) and the same as that of hydrothermal fluids venting on the present-day East Pacific Rise. This observation suggests that the process of Mg exchange for Si in hydrothermal systems was commonplace throughout Earth's history.The chemistry of vent fluids and hydrothermally altered igneous rocks was combined with an inventory of ³He in the mantle to model Earth's total hydrothermal flux. An Archaean flux (at 3.5 Ga) of about 10 times present day was accompanied by a correspondingly greater abundance of Mg(OH), SiO₂, carbonate and Fe---Mn metasomatic rock types as well as massive sulphides. Assuming a constant column of seawater since the Archaean, the average residence time of seawater in the oceanic crust was 1.65−8.90×10⁵ years in the Archaean. Assuming that ³He and heat are transported from the mantle in silicate melts in uniform proportions, the model stipulates that accretion of oceanic crust decreased from about 3.43−6.5×10¹⁷ g/yr to a present-day rate of 0.52−0.8×10¹⁷ g/yr, with a drop in heat flow from 1.4−2.6×10²⁰ cal/yr to 2.1−3.2×10¹⁹ cal/year.The total amounts of SiO₂ and Fe mobilised in marine hydrothermal systems since 3.5 Ga is less than their masses in the present exosphere reservoirs (crust, hydrosphere, atmosphere). The total amounts of Mg, K, CO₂, Ca and Mn are greater than their respective masses in exosphere reservoirs; therefore, they must have been recycled into mantle. The total mass of recycled hydrothermal components is small compared to the mass of the mantle. The flux of volatiles in hydrothermal systems is large compared to their volume in the atmosphere suggesting that the CO₂ and O₂ budgets of the atmosphere have been influenced by hydrothermal processes, especially in the Archaean.     

Diagenetic evolution of Aptian evaporites in the Namibe Basin (south‐west Angola)

The widespread and dissected nature of the Angolan gypsiferous salt residuals offers a uniquely detailed view of the lateral and vertical relations inherent to secondary evaporite textures, which typify exhumed salt masses worldwide. Such secondary textures are sometimes misinterpreted as primary evaporite textures. Thin, metre‐scale and patchy, dome‐like gypsum accumulations are well‐exposed within strongly incised present‐day river valleys along the eastern margin of the Namibe and Benguela basins (south‐west Angola). These sections are time equivalent to the main basinward subsurface evaporites (Aptian Loeme Formation) which mostly consist of halite. The gypsum (here called the Bambata Formation) is interpreted to represent the final residual product of fractional dissolution and recrystallization of the halite mass that occurred during Late Cretaceous margin uplift and continues today. This halite underwent multiple episodes of diagenetic alteration between its deposition and its final exhumation, leading to the formation of various secondary gypsum fabrics and solution‐related karst and breccia textures that typify the current evaporite outcrop. Four different diagenetic gypsum fabrics are defined: thinly bedded alabastrine, nodular alabastrine, displacive selenite rosettes and fibrous satin‐spar gypsum. Current arid conditions are responsible for a thin weathered crust developed at the top of the outcropping gypsum, but the fabrics in the main core of the current at‐surface evaporite unit mostly formed during the telogenetic stage of uplift prior to complete subaerial exposure. Alteration occurred as various dissolving and rehydrating saline minerals encountered shallow aquifers in the active phreatic and vadose zones. Geomorphological and petrographic analyses, mostly based on the cross‐cutting relations and crystallographic patterns in the outcrop, are used to propose a sequence of formation of these different fabrics.     

Characteristic analysis—1981: Final program and a possible discovery

The latest or n ewest version of the char acteristic an alysis (NCHARAN)computer program offers the exploration geologist a wide variety of options for integrating regionalized multivariate data. The options include the selection of regional cells for characterizing deposit models, the selection of variables that constitute the models, and the choice of logical combinations of variables that best represent these models. Moreover, the program provides for the display of results which, in turn, makes possible review, reselection, and refinement of a model. Most important, the performance of the above-mentioned steps in an interactive computing mode can result in a timely and meaningful interpretation of the data available to the exploration geologist. The most recent application of characteristic analysis has resulted in the possible discovery of economic sulfide mineralization in the Grong area in central Norway. Exploration data for 27 geophysical, geological, and geochemical variables were used to construct a mineralized and a lithogeochemical model for an area that contained a known massive sulfide deposit. The models were applied to exploration data collected from the Gjersvik area in the Grong mining district and resulted in the identification of two localities of possible mineralization. Detailed field examination revealed the presence of a sulfide vein system and a partially inverted stratigraphic sequence indicating the possible presence of a massive sulfide deposit at depth.     

Predisposition and cause of the catastrophic landslides of August 2005 in Brienz (Switzerland)

Very intensive rainfall in August 2005 (>300 mm/3 days) triggered moderately deep (2–10 m) landslides of about 50'000 m³ volume each in two mountain torrent catchments above the village of Brienz (Berner Oberland, Switzerland). These landslides – originating in Trachtbach and Glyssibach catchments – transformed into extremely rapid (>5 m/s) debris flows, which caused significant damage in inhabited areas; two persons lost their lives and about twenty-five families became homeless. The Brienz case was the most damaging one among many landslide disasters occurring during those rainy days in the Swiss Alps. In this paper we study in detail the predisposition and causes of the 2005 landslides in the Brienz area, based on field mapping, analysis of high resolution images and digital terrain models, derived from LIDAR and infrared measurements taken before and after the event. The features of these landslides are compared with past and dormant landslides in the mid-slope portion of the mountain chain north of Brienz, which has been the source of many catastrophic mass wasting events during the last centuries. Detailed field mapping shows that highly weathered series of strongly overconsolidated Mesozoic marls (Diphyoides Limestone & Vitznau Marls of Valanginian age) and their residual soils form the primary source for the sliding materials. The rupture surfaces of the moderately deep landslides often run at the transition from saprolite to weathered bedrock, with a dip angle of about 40o in the landslide depletion area. These landslides transform into debris flows, where debris slides into strongly convergent hillslopes or directly into headwater channels.     

The Flat Dilatometer Test in an Unsaturated Tropical Soil Site

The site characterization of unsaturated soils is well stablished based on laboratory tests, which are expensive and time-consuming. In-situ testing methods, such as the flat dilatometer test (DMT), are an alternative to the traditional approach of drilling, sampling, and laboratory testing. The literature on DMT interpretation is well established on saturated and well-behaved soils. Only few studies deal with DMT interpretation in unusual soils, and little is known about the influence of soil suction on this test. This paper presents and discusses the influence of soil suction on four DMT campaigns carried out in an unsaturated tropical soil site, also incorporating the soil suction influence on the DMT interpretation. Soil suction was estimated by the soil–water characteristic curve (SWCC) and water content profiles. The water content profiles range from 11.3 to 19.7% which corresponds to a suction range estimated by SWCCs mostly between 6 and 200 kPa. Soil suction significantly influenced DMT data up to 5 m depth at the studied site (the unsaturated active zone) increasing the intermediate DMT parameters. The average horizontal stress index (K_D) was equal to about 1.7 and the average dilatometer modulus (E_D) was about 4.7 MPa in the active zone and practically doubled their values due to in situ soil suction. The estimated peak friction angle (?) was 20–30% higher due to soil suction influence on DMT assuming the soil behaves as a sand like material. Soil suction must be considered to assess the behavior of the investigated soil by the DMT. The suction influence should be incorporated in the effective stress and this approach considerably improved the site characterization of the studied site.

     

Sources and behavior of arsenic and trace elements in groundwater and surface water in the Poopó Lake Basin,Bolivian Altiplano

Water management in semiarid and arid catchments such as the Poopó Lake Basin requires improved understanding of the complex behavior of the various contaminants, which affect the drinking water quality and considered as crucial for sustainable development of the region. Mechanisms of arsenic (As) release in the surface and groundwater were studied. Hydrochemical data for surface water (4 samples) and groundwater (28 samples) were collected in a small watershed in the Poopó catchment at the highland of the Bolivian Andes (Altiplano). All of them show high electrical conductivity values and moderately oxidizing conditions. The surface water contains high concentration of sulfate and the trace elements As, Zn and Pb in the zone affected by acid mine drainage. There is a large variability of the concentration of As and of the trace elements in the groundwater in the five different regions within the Poopó catchment. The metal concentrations sensitive to changes of redox state and results of speciation modeling suggest that As (V) is a predominant aqueous species, which conforms to the prevailing oxidizing conditions in the shallow groundwater environment. Two generalized trends for As distribution were identified in groundwater: (a) high concentrations are found in the arid zone (100–250 μg/L) in the southern (region III) and in the northwestern (region V) regions, and (b) low concentrations (<50 μg/L) are found in the remaining part of the basin (region I, II and IV). However, the spatial distribution within these regions needs to be investigated further. A conclusion from the present study is that there are multiple sources of As as well as other trace elements (such as Cd, Mn and Zn) in the Poopó Lake Basin. Among the sources and the processes which led to the mobility of As and other trace metals in the region are: (a) weathering of sulfide minerals, (b) oxidation of pyrite and/or arsenopyrite in mineralized areas and (c) desorption from hydrous ferric oxide (HFO) surfaces. In non-mining areas, volcanic ash is suggested to be a significant source of As.     

Rare earth element geochemistry of potassic lavas from the Birunga and Toro-Ankole regions of Uganda,Africa

Neutron activation determination of La, Ce, Sm, Eu, Tb, Yb, Lu, Ta, Hf, Sc, Co and Th in potassic lavas from the Birunga and Toro-Ankole regions show that the rocks are characterized by high rare earth element (REE) contents (161–754 ppm) and form two groups based upon differing La/Yb ratios. One group is made up of katungite, ugandite and mafurite with La/Yb =146–312, and the other of rocks of the leucitite and phonolitic tephrite series, La/Yb =30–56. The trace element content of the ugandite group is similar to that of kimberlites. The data do not indicate any trends of differentiation or simple relationships between the two groups of rocks, although katungite is unlikely to be parental to rocks of lower La/Yb ratios. It is unlikely that in terms of La/Yb ratios that partial melting of mica-garnet-lherzolite mantle can form katungite because of the very small amounts of partial melting required (0.2%), although the La/Yb ratios of 150–200 (ugandites, mafurites) and 30–60 (leucitites, phonolitic tephrites) can be accounted for by 0.3–1.5% and 1–9% melting respectively, if the REE are then concentrated without further La and Yb fractionation. Partial melting of mantle which has been metasomatized by alkaline earths and REE bearing fluids or mixing of carbonatite and nephelenite are also compatable with the observed geochemistry of the lavas. It is considered that gas transfer processes which selectively enrich the light REE may have obscured REE evidence pertaining to early partial melting and/or differentiation processes and therefore that REE geochemistry is of little use in determining the petrogenetic processes involved in the formation of potassic lavas.     

Pyroxene-melt equilibria: an updated model

An updated model for pyroxene-melt equilibria at 1 atm has been developed and calibrated using new and existing experimental data in order to refine calculations of liquid lines of descent, which simulate the effect of igneous differentiation processes. We combine the Davidson and Lindsley (1985) model for activities of components in clinopyroxene and orthopyroxene solid solutions, a _i ^p , where i represents a quadrilateral endmember, with the Nielsen and Drake (1979) expressions for component activities in the melt, a _i ^L (two-lattice melt model). The chemical potential differences for pyroxene-melt equilibria are expressed in the form: $$\Delta \mu _{\iota } = 0 = In \left( {{{a_i^p } \mathord{\left/{\vphantom {{a_i^p } {a_i^L }}} \right.\kern-\nulldelimiterspace} {a_i^L }}} \right) + A_i + {{B_i } \mathord{\left/{\vphantom {{B_i } T}} \right.\kern-\nulldelimiterspace} T}$$ Pyroxene compositions were projected to quadrilateral compositions with the method of Lindsley and Anderson (1983). The regression constants A _i and B _i were calculated from experimental data that consists of 282 pyroxene-melt pairs, including 83 orthopyroxene-melt pairs. These experiments were all performed at 1 atm and represent compositions ranging from basalts (alkali to lunar) to dacites (42–66 wt% SiO₂). The model is calibrated for 1000相似文献   

Significance of river–aquifer interactions for reach-scale thermal patterns and trout growth potential in the Motueka River, New Zealand

To assess whether reaches of the Motueka River (New Zealand) that gain water from groundwater were likely to represent significant cold-water refugia for brown trout during periods of high water temperatures, water temperature was monitored for more than 18 months in two gaining reaches of the Motueka River and three reaches that were predicted to be losing water to groundwater. These data were used to predict brown trout (Salmo trutta) growth in gaining and losing reaches. Groundwater inputs had a small effect on water temperature at the reach-scale and modelling suggests that the differences observed were unlikely to result in appreciable differences in trout growth. Several coldwater patches were identified within the study reach that were up to 3.5°C cooler than the mainstem, but these were generally shallow and were unlikely to provide refuge for adult trout. The exception was Hinetai Spring, which had a mean water temperature of close to 16°C during the period January–March, when temperatures in the mainstem regularly exceeded 19°C. Trout were observed within the cold-water plume at the mouth of Hinetai Stream, which would allow them to thermoregulate when mainstem temperatures are unfavourable while still being able to capitalise on food resources available in the mainstem.